Dell Poweredge 830 - Router OS To Log Bandwidth Usage By IP?
Jul 24, 2011
I have a dell poweredge 830 (3.0 dual core pentium, 2gb ram, 2x160gb hdd in raid 1, dual port intel gigabit card). I'm trying to find a router OS that logs bandwidth by ips on the lan. I tried untangle and clearos neither of which have a feature (or one that I can find) that logs the bandwidth by ip. Apparently pfsense has a package you can install but I have never been able to get pfsense to work on this pc, it always errors in one way or another (on the 2.0rc3 I can't access the web page, it says it is missing a file).
View 19 Replies
ADVERTISEMENT
Apr 7, 2012
Ok, so what I want to do is make a router/firewall/proxy (maybe add webserver/FTP as well). Just to start off I want to say that I have moderate knowledge of Linux, enough to administer it from the CL. I have setup routers before but it was years ago and I've forgotten some of the details involved. What I do is a base LAMP install, with DNS, Samba, DHCP server, OpenSSH and then Webmin for easier administration. I've also installed EHCP (easy hosting control panel) in the past but have not at this point.
So, what I want to know is how do I setup the NIC's in the etc/network/interfaces file. Let's say that eth0 connects to the modem and eth1 & 2 are internal adapters. Currently my network is running a Linksys WRT54GL with DD-WRT and the router is set to DHCP for the WAN connection and DHCP is running on the internal network as well. The modem is at 192.168.254.254 and is giving the router an address of 192.168.254.1 my internal network is 192.168.1.1 (192.168.1.0/24). I would like to setup my internal router address to 192.168.1.1 so I guess I need to set it to static in my interfaces config and then set my eth0 to dhcp. Does this sound correct?
So if I do the above my only question is how do I setup the routing tables after that? I always get messed up when I need to make the switch from my Linksys router to my Linux box. I'm not worried about firewall rules at first I can change those once I have the router up and running. I just don't know if I need to make some kind of bridge to bridge the eth0 and eth1 (external NIC and internal NIC).
View 3 Replies
View Related
Jun 2, 2011
I working with two PowerEdge R515 systems and for some reason I keep getting strange power errors on the front LCD where it turns orange. It started with one about an on-board regulator failure and this morning when I came in both machines were powered down with a different LCD error, something about the Fault-safe voltage being out of range? They both say to contact support.
I got these error logs this morning. All the power readings show as being ok in the iDRAC page and in ESXi readings.
System BootThe system board PFault fail-safe voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range.
The only strange thing i see is that on the power supply tab it says the max input wattage is 750 with the actual input being 972.
Individual Power Supply Elements Status Location Type Input Wattage Max Wattage Online Status FW Version PS 1 AC972750Present03.02.00
View 1 Replies
View Related
Apr 18, 2012
I'm having a really difficult time getting to find the right drivers for a poweredge 1950. I know it has 2 broadcom on-board NIC's and they work fine in Windows 7 so I feel I should be able to find drives for Vista bus 64. I tried downloading the drivers from the dell site and they turned out to be drives for server 2003 and 2k8, and wouldn't work with Vista.
how to identify the chipset of the onboard NIC's so I can do a better search for the drivers? I tried running Belarc advisor which usually gives pretty detailed info but it didn't even mention the broadcom's.
View 5 Replies
View Related
Feb 3, 2011
have a Dell Poweredge 2500, and it only has PCI slots, and i need to get a sata controller to add 1/2 drives to it, i am unsure what would be the best, but i am not looking to spend more than 60 or so for it, i am not worried about it being the greatest out there, as this server is going to be replaced in 6 mths, i am just outgrowing the 4-18.6 gig hot swap scsi drives, and my pockets arent deep enough to buy high capacity scsi drives, i will probably add 1, 1 or 2 Terabyte hard drive and a dvd-rw.
View 4 Replies
View Related
Jan 17, 2011
I'm a Dell Partner and I've been trying to figure out why I can't order a Poweredge T410 server with 8GB of RAM. The only options are 3GB, 4GB, 24GB, or 32GB. I ordered a T410 for another client at the middle of last year with 8GB of ram. Now they don't offer that. I realize I could buy RAM after the purchase, but I'd rather just buy the server configured the way I need it for the client and not have to worry about separate warranties on the aftermarket memory, etc.
Also, I want to do a custom RAID configuration, as suggested a few times on the forum. Two harddrives in a RAID-1 array for the OS, and four harddrives in RAID-10 (or RAID-5 with a hot spare) array for data.
I did an online chat with Dell and the rep said it was not possible, i.e. what you see in the online configurator is what you get. Do I need to call Dell to get a custom configuration?
View 4 Replies
View Related
Aug 12, 2009
I have a Dell PowerEdge 2800 (Just reinstalled windows Server 2003) I have tried the two (non lan) network driver setups that dell has on its site and I get "the update package is not compatible with your system configuration".
I am trying to access the internet on my box, how to accomplish this or fix the problem I'm getting while loading driver setup?
View 2 Replies
View Related
Jan 18, 2012
I was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
View 9 Replies
View Related
Apr 1, 2012
On my home network I have 11 devices connected.Is there a way I can give each device a certain bandwidth limit so my Internet doesn't keep getting sucked up?
View 5 Replies
View Related
Apr 21, 2012
Any reliable free software to monitor my bandwith usage for my home computer?
View 4 Replies
View Related
Mar 22, 2012
My home network has two routers. My setup is...modem to router 1, then router 1 to router 2. is there a way to track the bandwidth usage on the two routers. My ISP says that I'm going over my bandwidth allowance and that's because in my household, we are hardcore gamers, netflix, and internet users. Router 2 belongs to my sister-in-law, and router 1 is mine. But I want to know which and more importantly, "WHO" is using more of the bandwidth.
View 3 Replies
View Related
Jan 3, 2013
We run a small school and one of our campus sites is quite remote and our internet provider chares big dollars for internet downloads.One of our classes has just been upgraded to run over the internet and involves downloading 6Gig of video each time it is run. This will cost us approximatly $15 for each student and we have hunreds of student. We provide computers for this course work.
View 5 Replies
View Related
May 6, 2011
I have 4 laptops (WiFi), 2 desktops (LAN), xbox (LAN), and dish receiver (LAN) that are all connected to the internet using the method between the brackets. Recently i am running out of bandwidth, and what i am looking for is a freeware that i can install in one of the computers that could tell me which IP or MAC address used how much internet.I have read several articles: some articles point me to softwares which only monitor the computer that they are installed. Other posts argued that such thing can only be done through the main router. I know my router doesn't have such feature. I use SMC router.
View 3 Replies
View Related
Feb 18, 2012
Currently We have several Active Directory Domain at several Technical High Schools. These are used by us as a it educational unit(s). The Tech School System's IT Department has a fiber wan between the schools that allows communication between these units. We wanted to interconnect the unit's Active Directory's with Trusts or by combining them into one forest. However I am wondering How much bandwidth that alone would require? There make be some file access between units but not on a daily basis since the units are separate from one another. How much bandwidth do you think this would require?
View 5 Replies
View Related
Jan 24, 2013
I want to use MRTG to monitor my DSL connection bandwidth useage.
Should I monitor:
ATM 0/3/0 or
Dialer 1 or
Virtual-Access 2
ps. is the 'BW' aspect of show interfaces important? I have 56Kbit/sec on Dialer 1, 100,000 Kbit/sec on Dialer 1 and 1024Kbit/sec on ATM.
View 2 Replies
View Related
Feb 17, 2013
Do larger computer screens use more data? Or is it just a matter of screen resolution?
Is there a difference between large, small, laptops, and tablets in bandwidth consumption if all the screens were set to a resolution of 1024 x768?
View 11 Replies
View Related
Jan 13, 2013
Region : Romania
Model : TL-WR841ND
Hardware Version :
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : cosmote
hardware version is WR841N v8.wireless works just fine. i use it for my smartphone and an old laptop. i use ethernet cable to connect to main computer where all is ok until i start using my bit torrent client. as soon as i build up traffic above 1MB the ethernet portion of the router freezes and needs a reboot. when frozen, wireless is still working and i still have access on the lan to the router via my browser. i got this router so i could have wifi for my phone. my old router (asus rx3041) worked just fine and i accessed my isp at the maximum speeds it would allow on a 60 gigabit connection.
View 9 Replies
View Related
Apr 15, 2012
I have an employee using a Vostro 1015 Config 020, Genuine Windows® 7 Professional, 32bit laptop in Ireland. A local tech there told her " that with new laptops you don’t need to use a converter because they have a built in one", and I need to find out if that is true.
View 1 Replies
View Related
Jun 19, 2013
I have an old computer (Dell gx280) that has a external usb 2.0 hard drive connected to it. I was trying to copy the files over a gigabit network connection to another computer and it was only transferring at approx. 2.5 megabytes a second. This was only using a small fraction of the gigabit network card in both the source and destination computer. I saw the CPU was maxed out on the source PC b/c of an application. Once I quit that application the CPU usage went back to essentially nothing. The copy job then jumped up to 14 megabytes a second and was using 30-35% of the gigabit connection.
The NIC and the USB ports are on the motherboard. How did the CPU usage slow this whole process down and was it impacting the network card, the USB port or both?
View 2 Replies
View Related
Apr 3, 2013
however recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.
View 6 Replies
View Related
Jul 11, 2013
I'm trying to debug a latency / bandwidth issue with 2 servers ( DELL 860 ) connected by infiniband. Servers use 10Gb cards connected on a MTS2400, here are the result for bw and latency: [code]
Are those values 'normal'? I was hoping to get more bw and less latency.I'm using CentOS 6.4 with ib_ipoib driver, it's using stock settings.
View 2 Replies
View Related
Mar 15, 2013
I've been looking around for a way to track my usage on my D-Link router. Any posts to address this seem to be a few years old. At that time, there was nothing I could do to track it via the 825. Any 3rd party firmware or anything from DLink that I can use?
View 5 Replies
View Related
Nov 7, 2012
Site-to-site tunnel between 881 router and ASA 5510 don't work stable,When PHASE 2 completed and Ipsec Tunnel has been builded, 881 resend some entities which will increment error counters.
View 1 Replies
View Related
Mar 9, 2011
using my wireless router (and my dsl internet connection)?My router is a Linksys WRT54G. I have a Windows 7 desktop, a Windows XP SP3 desktop and a Windows XP SP3 laptop that connect to the router.
View 9 Replies
View Related
Mar 22, 2011
I have an issue with 7600 router where CPU goes up to 60-70% and memory is also high. Both due to BGP Router process. URL We are seeing this issue since ISP has upgraded their router 20 days ago. Router also seen following error.I have not reset the BGP session with ISP yet. Is there any way I can supress BGP updates coming from ISP and see if CPU and memory USAGE reduces. IOS version 12.2(33)SRD and RSP720 with PFC 3cXL
View 1 Replies
View Related
Dec 7, 2012
how to stress a GNS3 router in order view an increase in its CPU usage?
View 1 Replies
View Related
Sep 12, 2012
I have an issue with 7600 router where CPU goes up to 60-70% and memory is also high. Both due to BGP Router process. [URL] According to our baseline it should not be more than 40% at any given time. We see high CPU uptp 70% consistently.
CPU utilization for five seconds: 99%/0%; one minute: 57%; five minutes: 55%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
442 66173704 90234125 733 96.86% 46.09% 46.30% 0 BGP Router
7 509291060 26330202 19342 1.17% 3.90% 2.99% 0 Check heaps
Router has 1 eBGP session with ISP from where it downloads whole IPv4 internet routing table and two IBGP session with other two rotuer. When I look at BGP summary table I see many updates received from ISP and sent out to IBGP neighbors. Also did debug BGP updates to confirm it.
We are seeing this issue since ISP has upgraded their router 20 days ago. Router also seen following error.
%BGP-6-BIGCHUNK: Big chunk pool request 628 for community. Replenishing with malloc
I have not reset the BGP session with ISP yet. Is there any way I can supress BGP updates coming from ISP and see if CPU and memory USAGE reduces. IOS version 12.2(33)SRD and RSP720 with PFC 3cXL
View 5 Replies
View Related
Sep 9, 2011
We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps
View 5 Replies
View Related
Dec 13, 2012
I own a wireless router (ZTE W300) and due to the large number of devices in my house, and limited broadband usage, can I limit downloads/uploads (in other words, limit data usage) to a particular device over the network?I think the stock firmware on my router doesnt allow that (and its pretty base level too). If so, do you recommend any other firmware that can do the task, and is compatible with my router?
View 1 Replies
View Related
Apr 7, 2013
whenever I setup URL filtering in 1841 router with policy-map type http and zone-pair command, I experience 100% CPU spike. is there any workaround?
View 1 Replies
View Related
Mar 13, 2013
I have a small business customer that is on the hunt for a new small business level router. While they are staying OK on a current consumer level gigabit WAN Netgear box, we are eager to implement something much better. After giving a Zyxel USG50 a try, we had a nightmare with their VOIP provider, Vocalocity, that doesn't like to have SIP ALG turned on (which Zyxel says is a requirement for their USG boxes to work with SIP service). I was curious if any of you had recommendations on great gigabit WAN small business routers (not UTMs of any sort).Here is their setup:
* 1 incoming WAN connection from a fiber provider called Sidera. They are achieving over 100Mbps currently and their provider Sidera REQUIRES us to have a gigabit WAN capable router in order to match the duplex and speed of their enteprise switches.
* About 8-12 office computers.
* About 8-10 VOIP desk phones through Vocalocity (Cisco SPA phones using SIP service, all cloud hosted - a Zyxel USG50 wreaked havoc on the service).
We are looking for something in the $100-250 price range. There seem to be a few options but I am not sure which one would be best to go with, that has a great compatibility out of box with cloud hosted voip phone service.
Any experience with any of the above units in such a setup as we have? The highest priorities for us are LAN-WAN throughput and VOIP quality/bandwidth/compatibility. Dual WAN is not a necessity, but nice to have. Prefer that all ports on the box are full gigabit if possible, but WAN has to be.
View 8 Replies
View Related
Jan 24, 2013
My company thus cuts off my subscription before the month ends.My family and I use a total of 8 devices on our home wireless network; 3 laptops, 4 iPads, and a Galaxy phone.My router/modem home page shows me the total amount used by all users.. I use a huawei LTE B593 router.
View 2 Replies
View Related
Mar 24, 2013
I have a WRT54G routher hardlined to a Ubuntu 12.04 server that is dedicated to minecraft.I have two ports opened for Minecraft to run off of.I'de like to give remote access to the computer to other people to maintain the server.BUT I need to restrict ANY and ALL ability for them to access the internet by either blocking all other ports or something else. Id rather not have to restrict it through Ubuntu if I don't have to.
View 1 Replies
View Related
