Getting Power Errors With New Dell PowerEdge 515
Jun 2, 2011
I working with two PowerEdge R515 systems and for some reason I keep getting strange power errors on the front LCD where it turns orange. It started with one about an on-board regulator failure and this morning when I came in both machines were powered down with a different LCD error, something about the Fault-safe voltage being out of range? They both say to contact support.
I got these error logs this morning. All the power readings show as being ok in the iDRAC page and in ESXi readings.
System BootThe system board PFault fail-safe voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range.
The only strange thing i see is that on the power supply tab it says the max input wattage is 750 with the actual input being 972.
Individual Power Supply Elements Status Location Type Input Wattage Max Wattage Online Status FW Version PS 1 AC972750Present03.02.00
View 1 Replies
ADVERTISEMENT
Apr 18, 2012
I'm having a really difficult time getting to find the right drivers for a poweredge 1950. I know it has 2 broadcom on-board NIC's and they work fine in Windows 7 so I feel I should be able to find drives for Vista bus 64. I tried downloading the drivers from the dell site and they turned out to be drives for server 2003 and 2k8, and wouldn't work with Vista.
how to identify the chipset of the onboard NIC's so I can do a better search for the drivers? I tried running Belarc advisor which usually gives pretty detailed info but it didn't even mention the broadcom's.
View 5 Replies
View Related
Jul 24, 2011
I have a dell poweredge 830 (3.0 dual core pentium, 2gb ram, 2x160gb hdd in raid 1, dual port intel gigabit card). I'm trying to find a router OS that logs bandwidth by ips on the lan. I tried untangle and clearos neither of which have a feature (or one that I can find) that logs the bandwidth by ip. Apparently pfsense has a package you can install but I have never been able to get pfsense to work on this pc, it always errors in one way or another (on the 2.0rc3 I can't access the web page, it says it is missing a file).
View 19 Replies
View Related
Feb 3, 2011
have a Dell Poweredge 2500, and it only has PCI slots, and i need to get a sata controller to add 1/2 drives to it, i am unsure what would be the best, but i am not looking to spend more than 60 or so for it, i am not worried about it being the greatest out there, as this server is going to be replaced in 6 mths, i am just outgrowing the 4-18.6 gig hot swap scsi drives, and my pockets arent deep enough to buy high capacity scsi drives, i will probably add 1, 1 or 2 Terabyte hard drive and a dvd-rw.
View 4 Replies
View Related
Jan 17, 2011
I'm a Dell Partner and I've been trying to figure out why I can't order a Poweredge T410 server with 8GB of RAM. The only options are 3GB, 4GB, 24GB, or 32GB. I ordered a T410 for another client at the middle of last year with 8GB of ram. Now they don't offer that. I realize I could buy RAM after the purchase, but I'd rather just buy the server configured the way I need it for the client and not have to worry about separate warranties on the aftermarket memory, etc.
Also, I want to do a custom RAID configuration, as suggested a few times on the forum. Two harddrives in a RAID-1 array for the OS, and four harddrives in RAID-10 (or RAID-5 with a hot spare) array for data.
I did an online chat with Dell and the rep said it was not possible, i.e. what you see in the online configurator is what you get. Do I need to call Dell to get a custom configuration?
View 4 Replies
View Related
Aug 12, 2009
I have a Dell PowerEdge 2800 (Just reinstalled windows Server 2003) I have tried the two (non lan) network driver setups that dell has on its site and I get "the update package is not compatible with your system configuration".
I am trying to access the internet on my box, how to accomplish this or fix the problem I'm getting while loading driver setup?
View 2 Replies
View Related
Jan 18, 2012
I was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
View 9 Replies
View Related
Apr 7, 2012
Ok, so what I want to do is make a router/firewall/proxy (maybe add webserver/FTP as well). Just to start off I want to say that I have moderate knowledge of Linux, enough to administer it from the CL. I have setup routers before but it was years ago and I've forgotten some of the details involved. What I do is a base LAMP install, with DNS, Samba, DHCP server, OpenSSH and then Webmin for easier administration. I've also installed EHCP (easy hosting control panel) in the past but have not at this point.
So, what I want to know is how do I setup the NIC's in the etc/network/interfaces file. Let's say that eth0 connects to the modem and eth1 & 2 are internal adapters. Currently my network is running a Linksys WRT54GL with DD-WRT and the router is set to DHCP for the WAN connection and DHCP is running on the internal network as well. The modem is at 192.168.254.254 and is giving the router an address of 192.168.254.1 my internal network is 192.168.1.1 (192.168.1.0/24). I would like to setup my internal router address to 192.168.1.1 so I guess I need to set it to static in my interfaces config and then set my eth0 to dhcp. Does this sound correct?
So if I do the above my only question is how do I setup the routing tables after that? I always get messed up when I need to make the switch from my Linksys router to my Linux box. I'm not worried about firewall rules at first I can change those once I have the router up and running. I just don't know if I need to make some kind of bridge to bridge the eth0 and eth1 (external NIC and internal NIC).
View 3 Replies
View Related
Mar 3, 2013
how can I enable an automatic power-on after a power failure on an ASA 5512-X?
View 12 Replies
View Related
Sep 13, 2011
I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors 0 47749
Small Buffer Misses
4 misses
139 misses
[code]....
View 1 Replies
View Related
Jan 16, 2013
I have a Vostro 3550 running Windows 7 Pro. It has a Dell Wireless 1702 802.11b/g/n card with an intermittent fault:The error messages that Device manager reports are:This device cannot find enough free resources that it can use. (Code 12)If you want to use this device, you will need to disable one of the other devices on this system.and also:This device cannot start. (Code 10)These both appear about 80% of the time while trying to use Wifi. A restart of the removes the error message and wifi can sometimes be used as normal for a short period before one of the errors reappears. When booting into a Linux live-cd the error messages also appear with ath9k drivers..
View 3 Replies
View Related
Sep 23, 2012
I'm configuring a 2 PowerConnect in stack mode. I can't seem to resolve this error - Recieved Frame Check Sequence Errors.Both stacks are in the lastest firmware version 3.3.4.1. Physical connections are tight.
View 1 Replies
View Related
Nov 27, 2011
I just got a Dell Powerconnect 3324 from work and well needless to say it is very loud. Any good fan replacement that will do the job and not be nearly as loud? It currently has two Sunon KD1204PKV1, 40x40x20mm, 12V, 8.9 CFM, two wire fans.
View 6 Replies
View Related
Jan 28, 2010
I have been having problems with my Bluetooth device since I bought my laptop. I downloaded the Toshiba Stacking and all possible drivers that suit my computer, but I get the feeling that it could not connect with the hardware itself. I am using Windows 7. When I try to fix the problem, the program opens a window 'Activate Bluetooth by Fn + F2 or Radio On/Off button.' ot something. With the Fn + F2 keys there is no effect and where to switch on or off the radio. By the way, the Bluetooth light on my laptop is on all the time
View 2 Replies
View Related
Feb 1, 2013
I got my XPS L322X yesterday, and this problem occured from the first time I turned on my laptop. Everytime I turned on or restarted my computer, I could connect to my wifi router, and everything works well in the first 3-5 minutes. But later the wifi connection turned to "limit", and if I searched for the networks again, all wifi hotspots disappeared!
And if this problem popped up, there would be a follow-up problem -- I could not turn off my computer nor restart it! If I tried to restart the computer, it stayed on the "restarting" screen for 5 minutes, and a "power_start_up_failour" error warning later. If I then restarted the computer by pushing the power button for 5 seconds, it showed that the network adapter was disabled. Enableing the adapter would start this whole problem all over again!
View 2 Replies
View Related
Dec 17, 2011
After a recent power outage while my PC was in sleep mode, I don't have wired (Ethernet) connectivity.
I have new Dimension E510XP Media Center Edition, Version 2002, SP3 ver had an issue with wired connectivity on this PC after coming out of sleep mode. Of course, the power failure was unusual.
Observations:
- ipconfig /all shows that I have an IP address
- I can ping the DHCP server listed in ipconfig /all and I also can ping google.com.
- I was going to go a restore point set before the power outage. But, somehow system restore had gotten turned off. Oh, well. I did go ahead and turn system restore back on.
Things I've already tried that did not solve the issue:
- Reboot
- Uninstall/reinstall the network adapter driver. Device Manager says the network adapter card is working properly.
- Looked for an updated network adapter driver on Dell's website. Turns out that I have the latest driver already.
- Followed many of the steps from Microsoft at [URL]
- Checked McAfee Security Center firewall permissions list to see if something got changed. Everything looked okay. Also disabled the firewall just to be sure,
- Disabled SafeEyes internet filter.
- Reset the router. Also swapped router ports with a known good PC. The known good PC still had connectivity, the affected PC (the E510) did not.
View 6 Replies
View Related
Nov 27, 2011
We have a Power Edge T310, sporting two Broadcom 5716C LOM's. We also have a Power Connect 5524 switch. Good opportunity to team the two network connections using 'Link Aggregation (802.3ad)'. Downloaded the most recent management software off the Broad com site. Installed BACS 3 on the Power Edge, running Windows SBS 2011, which has Windows Server 2008 r2 x64 as it's base.
Started BACS and tried to configure teaming. But there's no teaming-section in BACS. I removed, restarted the server and re-installed the Broad com software, but still no teaming section? How do I solve this?
View 1 Replies
View Related
Dec 22, 2012
Recently acquired a Dell Inspiron 6000. I had the hard drive clean off and Windows XP reinstalled. I have no problem connecting to the internet when I power up if I go through "repair connection". I have to do nearly every time I power on. How do I get it to stop? My other Inspiron had no problems connecting.
View 2 Replies
View Related
Sep 21, 2011
Dell pc studio 450s will not recognize network connection after power outage. Have run diagnostic fix multiple times but to avail. I have roadrunner cable broadband connected to voyage router and then to wireless router. Wireless router and vonage works (as evidenced by this email using iPad)
Have already reset everything multiple times including unplugging modem and pc.
From what I understand the pc is getting gatewayaddress or does not recognize.
View 5 Replies
View Related
May 23, 2010
How do I disable the power management feature that slows my NIC down when I am on battery power?
I have a dell e6500 with a Intel 82567LM Gigabit LAN card that always connects at 10Mbps when I plug in the ethernet cord when I am on battery power, I've tried using different routers (I have two gigabit routers and one 100 mbps router)... it still auto-negotiates at 10 mbps I've tried using different cat6 cables, it still auto-negotiates at 10 mbps.I've checked the drivers, I have 10.0.6.0, which is the latest from the support.dell.com website.
However, the minute I plug in the laptop, the NIC connects at the proper speed. Essentially, when the laptop is using battery power, the NIC decreases it's speed to 10 mbps. When I plug the laptop in, the speed jumps up to what it should be (either 100 mpbs or 1 Gbps, depending on which router I'm plugged in to).
So, how do I disable this feature? I want to connect at the maximum possible speed, regardless if I am plugged in or not.
View 5 Replies
View Related
Dec 13, 2011
I am trying the connection above using 10G spf connectors. Is there any special configuration in order to have a trunk (with 2 disctinct vlans) betwen NX7000 and DELL 6224 ?
View 14 Replies
View Related
Jun 9, 2013
I am receiving the following error on 3750 stack switches. have already verified the power status and found ok.
IOS used: Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
211540: Jun 10 10:45:17.935 UTC: %PLATFORM_STACKPOWER-4-UNBALANCED_PS: Switch 4's power stack has unbalanced power supplies
211541: Jun 10 10:46:18.045 UTC: %PLATFORM_STACKPOWER-4-UNBALANCED_PS:
[Code]....
View 1 Replies
View Related
Sep 4, 2012
After stacking two 3750X switches, with four equal power-supply's, with StackWise and PowerStack , still got the next message every few hours %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding (gn4m-rt1p08-04-2)( note that the message revers to the second switch in the stack ) although the stackwise and powerstack on the switches is oke and are working correctly. !
Config : Stack-power in power-sharing mode/strict With CLI on the switch : All the power supply's and stack-power details, prio look OK.
Only: LMS prime /inventory/cisco-view/configure/power supply status result : some power supply's are marked as disabled.with the command > power supply 2 slot a off/on I manage to get the status back to "normal", but after a few hours some power supply's are again marked as "disabled".
Looks like SNMP en IOS difference from opinion.
Hardware
WS-C3750X-24S-S
C3KX-PWR-350WAC
Software
15.0(2)SE
C3750E-UNIVERSALK9-M
View 5 Replies
View Related
Jul 21, 2011
I keep getting alerts from our WCS stating that our 1252s are drawing low power. Now I am aware that they require enhanced PoE (up to 20W) but as we only have standard PoE in that building we purchased the 1252 series power injectors to go with them.
However, even with the correct power injectors the WCS still reports the draws low power error.
Is this a bug? Running WCS 7.0.172 at the moment.
Forgot to say we are using the PWR-INJ4 and the injector status is enabled and you see the injector MAC address when you drill in to the AP status.
View 9 Replies
View Related
Apr 14, 2013
We have two switches of the same model (WS-C3560-48PS-S) that are not providing PoE. I'm trying to remotely determine what the cause of the issue is.
Here is some output.
Hostname#show power inlineAvailable:0.0(w) Used:0.0(w) Remaining:0.0(w)
Interface Admin Oper Power Device Class Max (Watts)--------- ------ ---------- ------- ------------------- ----- ----Fa0/1 auto off 0.0 n/a n/a 15.4Fa0/2 auto off 0.0 n/a n/a 15.4Fa0/3 auto off 0.0 n/a n/a 15.4Fa0/4 auto off 0.0 n/a n/a 15.4Fa0/5 auto off 0.0 n/a n/a 15.4Fa0/6 auto off 0.0 n/a n/a 15.4Fa0/7 auto off 0.0 n/a n/a 15.4Fa0/8 auto off 0.0 n/a n/a 15.4Fa0/9 auto off 0.0 n/a n/a 15.4Fa0/10 auto off 0.0 n/a n/a 15.4(code)
View 1 Replies
View Related
Feb 28, 2011
I have a 6500 chassis with 2 power supplies. At the moment I am using the default configuration:
power-redudancy mode redundant
The problem is that an inserted module is in "power deny" state due too insufficient power.
I know, that It's not a good idea to change into combined mode (loss of redundancy), but my customers requested this anyway.
So I will change to combined mode. So here's the 1 million dollar question: "Which modules will go into power deny, if one of my power supplies fails?"
The 6500 config guide states:
"Power supply is removed withredundancy disabled
• System log and syslog messages are generated.
• System power is decreased to the power capability of one supply.
• If there is not enough power for all previously powered-up modules, some modulesare powered down and marked as power-deny in the show power oper state field."
Well, do you know if there's any way to configure some kind of priority? E.g. I definetly don't want by 10Gig Module or WiSM module to be in power deny. Can i statically make sure, those module will be powered on for sure? Like: "power enable module slot_number" How is this calculated? Or is random?
View 3 Replies
View Related
Apr 4, 2012
In a stand alone 3750x switch configuration, can the secondary power supply only act as a redundant power supply (active/standby), or can it become a "pool" of power similar to power sharing mode for StackPower (somewhat active/active)? I understand there is no stack involved here but I'm curious if this functionality is possible.
View 1 Replies
View Related
Dec 5, 2012
how can I enable an automatic power-on after a power failure on an ASA 5512-X?
View 5 Replies
View Related
Feb 12, 2013
I've got router as vpn-concentrator which receives vpn site-to-site connections from 10 branches with cisco 881 and cisco 1941.I started cacti monitoring and found out that there are too many errors on interfaces.URL.
View 5 Replies
View Related
Feb 19, 2013
I have a issue where after configuring aaa and rebooting, logging into the console port seems to be auto trying something before it finally times out and let's the user try. I getting the following sequence: [code] I need aaa to work via vty, however I need the device to boot directly to the Username: prompt so I can continue to use my VB script to clear the config when the devices are return from the field.
View 4 Replies
View Related
Jul 10, 2012
[code] Whenever I am browsing online, every once in a while the internet just cuts out. It still says I am connected to my wifi network, but there is "limited or no connectivity." Whenever it happens, everything on the network loses its internet at the same time. In the household, there is one PC (mine), one Mac (my wife's), one iPod touch, and 2 iPhones that all connect to the wifi. The vast majority of the time, when this problem occurs, simply unplugging the router and then plugging it back in fixes the issue.Sometimes however things are different. Especially lately, I sometimes get an "IP conflict" error message. It says another device on the network is using the same IP address. Sometimes with this error simply unplugging and replugging in the router works. Sometimes the router has to be reset twice before things start working again with this error. The error doesn't happen every time the disconnect occurs, but it seems to be getting more frequent lately.Sometimes the disconnect happens when I am playing an online game that requires a constant connection to the internet. Sometimes this goes as usual, where a single router reset fixes the problem. However, sometimes this situation gets more complicated. One game in particular (League of Legends, if it matters) has this problem all of the time. When the internet disconnects while this game is playing, I do not get the "limited or no internet" warning. Instead, the computer seems to think that it is connected, and that the internet is working.
During this scenario, resetting the router once is never enough. After resetting once, the wifi reconnects and now it realizes something is wrong. After the first reset, the computer seems to "realize" something is wrong after all, and I am connected to the network but this time with the "limited or no internet" warning. A second router reset after this usually fixes the problem.Last night the worst disconnect happened yet. It was in the middle of a game, and the internet cut out, with no warning on the network. After one router reset, the wifi network reconnected immediately with an "IP address conflict" error, and then I was connected with "limited or no internet" on the network. I did the second router reset as usually required, but nothing happened. After a second and a third reset, there was still a permanent "limited or no internet" warning.I tried hardlining in directly to the modem and there was still no internet. Running the network diagnostic on my laptop fixed it however and I was connected to the internet. However, wifi still would not work, even after trying the diagnostic again. Running the diagnostic came up with an error that the DNS server was not responding and so nothing could be done.This time I reset everything. Unplugged both the router and the modem and left them unplugged for 30 minutes. When I turned everything else on again, same issue. Connected to the wifi network, but "limited or no internet." I unplugged everything again, left them overnight, and this morning after plugging everything back in the internet was back.A few final points I think might be relevant:
1) When checking the system event logs, it's usually a DNS error that I get (see event logs, 1st attachment).
2) This disconnect error seems to be more prevalent when more devices are on the network. As I said, they have gotten more frequent lately, especially the IP conflict warnings, since the 2 iPhones were added a few weeks ago. 5 months ago when it was only my PC on the network, these issues were practically non-existent.
3) It's a Belkin wireless g-plus router. Model # F5D7231-4 version 1213. It is an older router.
4) This has been happening for almost a year, but just recently gotten so bad I have to get this fixed, especially after last nights that could not be reset no matter what.
5) I'm not sure the disconnects have ever happened why the PC is not connected. That may not be relevant however, because my PC is almost always on since I work from home, while the iPhones, iPod touch, and my wife's Mac are only connected periodically.
6) This error has occurred while my PC is the only device connected to the wifi network, but it seems much less frequent.
7) The time the error seems most likely to occur is when another device connects to the network, such as when my wife first gets home from work. This is not exclusive however, and the DC's can happen at any time.
I've seen that people want ping tests and ipconfig /all tests so I will post mine. I will edit my post with the same tests done the next time this dc happens. I've also included a screenshot of that xirrus wifi program. [code]
View 1 Replies
View Related
Sep 1, 2011
Any info concerning the installation of CW LMS 4.0.1 on Solaris 10!
The installation keeps on failing when it is checking for packages. Also the second time when we downloaded the software once more.
ERROR: AddProperty called with invalid package name: CSCOmd.
I have also attached the install log files.
The system is Solaris 10 with zones:
bash-3.00# more /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
121133-02, 125503-02, 126897-02, 127127-11, 127755-01, 138866-01 Incompatibles:
[Code] .....
View 5 Replies
View Related
Feb 23, 2011
I am seeing a lot of the following showing up in the WLC trap log:
Decrypt errors occurred for client <CLIENT-MAC> using WPA2 key on 802.11b/g interface of AP 00:17:0f:81:ad:90
we are using WLC runninn 7.0.98 and ACS 4.0
View 2 Replies
View Related
