Dell :: 5524 - Power Edge T310 And Broadcom Teaming
Nov 27, 2011
We have a Power Edge T310, sporting two Broadcom 5716C LOM's. We also have a Power Connect 5524 switch. Good opportunity to team the two network connections using 'Link Aggregation (802.3ad)'. Downloaded the most recent management software off the Broad com site. Installed BACS 3 on the Power Edge, running Windows SBS 2011, which has Windows Server 2008 r2 x64 as it's base.
Started BACS and tried to configure teaming. But there's no teaming-section in BACS. I removed, restarted the server and re-installed the Broad com software, but still no teaming section? How do I solve this?
View 1 Replies
ADVERTISEMENT
Oct 25, 2012
we currently have:
-2 Power-connect 3548p POE switches for phones
-3 Power-connect 5548 switches for computers and printers
-2 Power-connect 6224 switches for servers
2 Powerconnect 5524 switches for iSCSI traffic which are isolated
Im looking to link these switches together using the 10GigE ports on the right sides of the switches as opposed to using a standard 1Gigabit cable, where I can find these cables?
View 13 Replies
View Related
Mar 29, 2012
I have a client that has a newer Dell T310 - 8GB - Xeon 2.4, SBS 2011. Just went to a clients to move the office from one building to the other, couldn't log into the server so went to the terminal and saw the machine wasn't responsive in windows - users still able to access files and Quickbooks. I had to force shut down the machine.Now I fire it up, it gets to the login screen, and when I log in it gets stuck on the welcome screen. I can get into safe mode, i do not see any errors in event viewer that jump out. Hard drive lights are blicking like crazy at the welcome screen. But still can't get into it, and then the machine seems to lock up.
View 19 Replies
View Related
Feb 28, 2011
Client has a Dell T310 SBS 2008 box with 3 workstations running Windows 7 Professional.
Network is currently like this
Westell DSL Modem > Belkin Router (consumer crap) > Dell Powerconnect 2816 > server > workstations
I used the wizards on SBS to configure the internet, add the users, connect the computers, etc.
We are having intermittent internet problems. The only problem in the server SYSTEM eventlog is "Cannot connect to DNS server". At first I thought it was a server DNS issue so I changed the maxcacheTTL to 3 days. However, I noticed that I couldn't get into the Belkin configuration so I had to manually reset the router and everything worked fine. One thing to note is that the SBS server is handling DHCP and DNS, and in the router configuration there isn't an option to not use an alternate config or the ISP. Could this be causing the problem?
I don't do this as my day job, so I need some good fixes or things to look for. The fix right now is to power cycle the router.
View 11 Replies
View Related
Jan 27, 2011
What do the broadcom power saving mode settings mean? If power saving mode is enabled, what is the time it takes to go into power saving mode? What does fast mean?
View 1 Replies
View Related
Nov 28, 2012
i installed all the drivers i need and it still wont install broadcom 802.11n , i have been on the phone with till for almost an hour.
View 2 Replies
View Related
Dec 9, 2012
I use windows 8 32-bit ,, and the Bluetooth app can't support in this system ,,
i always use R273948 and R226746 in windows 7 to apply the Bluetooth app but windows 8 can't supply that app ... .
View 4 Replies
View Related
Oct 24, 2011
I have a Dell vostro 1320 and am having trouble getting a driver fot the wireless lan in xp. Any driver or a link to one.It is described as a network controller and I am assuming this is the wireless lan. Broadcom bcm 4312.802 rev 01.
View 1 Replies
View Related
Jun 29, 2013
So I bought Dell Latitude E6530. I noticed they were a lot of things missing, since I went to see in the Device Manager. After fixing so many, I have ended up with these. When I connect my laptop through A wire cable, it does connect but when I slide the wireless switch, it enables the Bluetooth but not the wireless, I have enabled Wireless in BIOS and yet nothing.
View 4 Replies
View Related
Jul 27, 2005
Purchased the Broadcom wifi 1450 mini card (BCM94309MP) and installed it in the Inspiron 5100 plugging in the pig tails too. Computer recognized it and attempted to install using plug and play XP. Displayed the message that the driver(s) were missing. Went to Broadcom website and found the driver dl site clicked on the BCM94309M site but no driver(s) download available. Where I can download the drivers?
View 2 Replies
View Related
Sep 10, 2012
Latitude D400 Win XP sp3. My wireless mini-pci card seems to have died. To replace the original card I bought a Broadcom BCM94318 (model WL5011s (TECOM) ) that was listed as compatible in a D400. No drivers just the hardware. My machine recognizes that the card is physically there but I do not have a drivers for it. Where can I get a driver that works?
View 4 Replies
View Related
Aug 21, 2011
Want to use WOL on 8300 with Broadcom Netlink card. Everything seems to be configured correctly: bios, network card, port forwarding etc. In fact I can wake up the 8300 over the internet following a complete shut down, but only if I do it within 3 secs or so, then it fires up OK. If I wait a little longer it will not respond to the Magic packet. I notice something strange which I suspect may be related: when I restart the PC, in the power management of the Broadcom card the box is checked that allows te computer to turn off the Broadcom card to save power, while I am sure that I unchecked it before shutdown. I suspect this setting is somehow overwritten by Windows. mentioned all BIOS setting are to enable WOL. As if Windows is ensuring that the Broadcom card is powered down so it cannot receive the Magic packet to initiate a startup.
View 8 Replies
View Related
Mar 2, 2007
I'm trying to get my local MAC address changed for Broadcom NetXtreme 57xx adapter in D620 running winXP. Based on Broadcom advice this should be pretty straightforward.In Microsoft Windows, right-click the Network Adapter in Network Connections and then click Properties. Click the Configure button and then the General tab. Configure the "Locally Administered Address" parameter by assigning a unique node address for the adapter. Netware: The Mac Address is configured by the adding Node=XXXXXXXXXXXX parameter to driver load command line in the AUTOEXEC.NCF file, where XXXXXXXXXXXX is the Locally Administered address.
However after clicking "configure" in "general" tab I see only "Driver Details, Update Driver, Roll Back Driver, Uninstall" buttons, on "advanced" tab I see "802.1p QOS", "Flow Control" "Speed and Duplex" and "Wake up Capabilities", however I CAN'T see "Locally Administered Address".I've tried :
- reinstalling drivers, at the moment using latest from Broadcom, from 2006-12-15
- reinstalling Dell's drivers
- installing Broadcom's Control suite
View 5 Replies
View Related
Aug 26, 2010
I have been trying to update my boradcom 5709c firware, or more acurrately trying to install the Broadcom Network Device firmware, family version 5.2.7 from the drivers page for my PowerEdge T110 running Server 2008 R2 Enterprise x64. Once the package extract and starts running, I am getting an error that simply says "BMAPI Error", and the program bails out. I really need to update this firmware, and have been looking for manual steps and other ways to get it done and have come up short.
Any other ways to get the firmware to update.
View 5 Replies
View Related
Aug 10, 2012
I have two of these computers side by side. The card in issue is recognized, but says no driver. I have copied the driver from the good 580e, downloaded everything I could, and cannot get it? Using Win7, 64 bit, comcast DSL. The bad one just stopped working?
View 1 Replies
View Related
Mar 3, 2013
how can I enable an automatic power-on after a power failure on an ASA 5512-X?
View 12 Replies
View Related
Mar 1, 2011
A few days ago, I noticed that my computer wasn't picking up my wired connection anymore while the wireless connection was still working fine. I opened up my network adapters and my Local Area Connection adapter wasn't even showing anymore, only the Wireless adapter. I updated my drivers, tried different cables and even a different router but still no dice. This morning, when I booted up my system, Windows said it was installing driver software for Broadcom Gigabit Ethernet Controller. I got really excited when I saw Local Area Connection in my adapter menu and plugged in my ethernet cable. Nothing happened and my laptop refuses to recognize the ethernet cable plugged in to it. It's a Dell XPS 1640, Windows 7 x64 with Service Pack 1.
P.S. Usually a little orange light appears in the ethernet port on my computer when a chord is plugged in. When I turned on my computer this morning with the chord in, the light was on. When Windows finished booting, the light went off.
View 6 Replies
View Related
Aug 4, 2012
My wifes Dell D600n with with Intel 2200BG wireless G card was Extremely difficult to get access to internet at first @ 54Mbps, but achieved it after 3 weeks of trying, after I had replaced motherboard, to fix battery charging issue.
The current problem, that i cannot seem to surmount is: I replaced the wireless card with a newer Broadcom BCM43222, Dual band N wireless card, that should be capable of connecting at almost 6 times the speed of the older G card. Unfortunately, the new card seems unable to connect at all.
ADDITIONAL INFORMATION: The wireless switch via keyboard Fn & F2, has been on the entire time. I've tried a couple of different drivers, to no avail. Ive uninstalled/ reinstalled both the card and drivers several times, still no connection. The device manager reports the card is off, at all times, and i cannot find any way to alter this, but, despite the fact that this sounds like it could definitely cause no connection, this is unlikely to be the reason, because it has reported that the wireless card is off at all times since the new Motherboard was installed, and the Wireless G card worked perfectly for the past 2 months, and still does, while the device manager was all the while reporting it was off.
Also the wired broadband connection, via cat 5, had never worked after changing MOBO, Nor did the Dial up modem, til both modem and Ethernet came to life, last night after reinstalling drivers for both the modem and Ethernet. unfortunately doing the same thing for wireless had no effect. All this time the Intel wireless G card has, and still does work perfectly every time i remove the Broadcom Wireless N card and plug the G card back in. Until lastnight, The device manager reported the wireless card had no driver installed. now it recognizes the driver is installed but still cannot connect wirelessly One wireless card driver I tried was called: BROADCOM_ABGN_DD-WRT.zip. I lost track of the name of the other driver that i've been trying. Someone on another forum said after installing BROADCOM_ABGN... That one must go to device manager advanced properties and select US from choices of US, Japan, or Germany, To get this driver to work. I've tried this too. Again, No improvement.
Ive built my own computers for the past 30 years, and repair them all the time, for hardware problems, but I fear software is not my forte. My son, who is better at software. Usually, together, we can solve any mechanical electronic or software malfunction, but we're both stumped by this one. Admittedly, we all sometimes overlook a simple solution while seeking a very difficult one. Whenever I face a difficult malfunction like this, I think of when as a 5 year old I was privileged to accompany my Engineer big brother to a local Airport to repair what i would later learn was a Automatic Direction Finder System, needed before flight. As I sat beside my on the tarmac, watching him sweat bullets trying to effect a quick fix, I noticed something that looked out of place to me, and started chanting his name, Ronnie, Ronnie, Ronnie... ad infinitum, as kids are like to do, til in desperation he finally dropped his screwdriver withwhich he aws about to dismantle the entire mechanism, and fairly yelled what?, to which I asked timidly, Ronnie are all those lightbulb things (electron tubes) supposed to be lit. he said of course!, and continued working, ignoring me for another hour. Finally when he stopped to scratch his head, I said "If they're all supposed to be lit why is one of them not lit? he insisted they all were, but was adamant that they weren't. when he asked which one, and i pointed to it. He tested it verifying the filament was, indeed, open, and demanded to know why id watched for 4 hours and hadn't said that before.
View 2 Replies
View Related
Oct 26, 2011
I just bought an XPS 8300 brand new.After woeking OK a few days, now it connects to the Broadcom Netlink Communication card only after rebooting 3-4 times at cold-start.
All the other home computers are connecting from the first shot. (two laptops and another desktop. They much slower computers.At the begining I have re-installed the driver (from DVD and downloaded), but not this is the problem.
The computer has to get a bit warm.When it does not connect, the Dell Test tool DOES NOT SEE (does not appear in the test list) the Broadcom NetLink Gigabite Ethernet card.
View 285 Replies
View Related
Oct 29, 2011
I have a Dell Inspiron 1525 that suddenly has an issue with Wireless Networking. When I try and troubleshoot it shows me that the Broadcom 802.11 Multiband Network Adapter has a Code 10 error and says the "device cannot start." I have tried uninstalling and updating the driver, but it just continues to tell me that it has the best driver every-time I try and update it.If I plug the laptop in to the router with a wired connection it works just fine, so it is obviously an issue with the wireless adapter.what I should do in order to get this to take a new driver so it works again?
View 7 Replies
View Related
Oct 13, 2012
I recently got a Dell Latitude D600. I know, it's outdated. I'm running Windows XP SP3.
My problem is that after installing all of the drivers for the Broadcom 570x Gigabit Intergrated Controller, I can't get the wireless to pop up in the bottom right hand corner. I can only connect with an Ethernet cable directly from my router. I have tried many things, even support packages, but I can't seem to get it to work. I've also tried Fn+F2. Also, in the Device Manager I see a "Network Controller" but it has a question mark that is yellow beside it, and I can't seem to install it.
View 3 Replies
View Related
Nov 23, 2011
I'm running an Optiplex 330 with the Broadcom NetXtreme 57xx Gigabit ethernet card.
The computer is running Windows 7, 64bit, but there do not appear to be any drivers for that OS.I tried selecting Vista 64bit, but there were no drivers. The Vista 32bit doesn't work.
Then I went to Broadcom and found these drivers: [URL] the W764bit drivers didn't change the fact i'm still on a 100Mbit card (as seen on Local Area Connection Status screen and the Device manager)
View 1 Replies
View Related
Nov 4, 2012
I have one Dell Optiplex 390 (windows 7 64 bit), which is having one PCI slot and 3 PCIe slots.The built in NIC cards doesn't support network teaming. I require 2 team in my system. Do you know any PCIe card with network teaming facility?
View 1 Replies
View Related
Mar 27, 2011
how to configure LAN teaming in Cisco ACS 1121. My requirement is to have virtual IP in the server with two physical IPs in the available 2 interface in the server.
View 1 Replies
View Related
Apr 25, 2013
I have a server windows 2008 that I would like to have a nic teaming configuration, the server has two nics, each nic is connected to a different switch. One is connected to cisco 2960 and the other is connected to cisco 2950. I have read here in forums about nic teaming but using the same switch. I have not found using different switch. Is this possible?
View 1 Replies
View Related
May 7, 2013
Does the new UCS hardware change anything ?Can we bundle 2 NICs somehow to get interface redundancy ?If still not possible to configure that in ACS 5 itself:Can it enentually be done on the "hardware" level within the appliance firmware (UCS BIOS) ?(RHEL would provide NIC bonding,,, unfortunately its not accessable from ACS5 CLI)
View 6 Replies
View Related
Jan 11, 2011
I have windows servers connected on cisco switch 4500 series. Issue is when server NIC configure with Teaming, some times servers gets not reachable, and after restarting the servers it gets reachable. Is 4500 series switch support the teaming software?
View 3 Replies
View Related
Jun 2, 2011
I working with two PowerEdge R515 systems and for some reason I keep getting strange power errors on the front LCD where it turns orange. It started with one about an on-board regulator failure and this morning when I came in both machines were powered down with a different LCD error, something about the Fault-safe voltage being out of range? They both say to contact support.
I got these error logs this morning. All the power readings show as being ok in the iDRAC page and in ESXi readings.
System BootThe system board PFault fail-safe voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range.
The only strange thing i see is that on the power supply tab it says the max input wattage is 750 with the actual input being 972.
Individual Power Supply Elements Status Location Type Input Wattage Max Wattage Online Status FW Version PS 1 AC972750Present03.02.00
View 1 Replies
View Related
Dec 4, 2011
I am working with a strange problem at the minute with HP's NIC Teaming with Transmision Load Balancing.We have a HP blade system the Server is connected to 2 cisco 3020's and then those 2 switches are connected to a 3750 Stack consisting of 2 Members.
Theres an LACP ether channel consisting of 4 Gigabit Ethernet Ports to each 3020 from the 3750 Stack.They both have exactly the same configuration and all ports are up and the channel looks healthy.
When setting the Preference order on the server if I set the NIC connected to the 1st Cisco 3020 as primary i.e. Tx/Rx then everything is fine.If I set the NIC Connected to the 2nd Cisco 3020 as primary then all seems fine i.e. I can ping it, it can access services outside its own vlan and the internet. It cannot however ping anything connected to the same subnet and VLAN on the 3750 Stack.
Doing a packet capture on a server connected to the VLAN on the 3750 stack I can see the Echo Requests coming in and the server sending an echo Reply but the echo reply never gets back to the server with the teamed NICs.
I did a Layer 2 traceroute and all looked fine, all the MAC Tables were good.I thought maybe it was a layer 2 loop causing the problems but I have checked and re-checked STP and can't find any problems. STP has picked up one intentional loop and blocked it.
I've raised a ticket with HP to see if they can point me in the right direction but I don't think it is a problem with there Drivers. It definately seems like a networking problem.
View 5 Replies
View Related
Nov 27, 2011
I just got a Dell Powerconnect 3324 from work and well needless to say it is very loud. Any good fan replacement that will do the job and not be nearly as loud? It currently has two Sunon KD1204PKV1, 40x40x20mm, 12V, 8.9 CFM, two wire fans.
View 6 Replies
View Related
Jan 28, 2010
I have been having problems with my Bluetooth device since I bought my laptop. I downloaded the Toshiba Stacking and all possible drivers that suit my computer, but I get the feeling that it could not connect with the hardware itself. I am using Windows 7. When I try to fix the problem, the program opens a window 'Activate Bluetooth by Fn + F2 or Radio On/Off button.' ot something. With the Fn + F2 keys there is no effect and where to switch on or off the radio. By the way, the Bluetooth light on my laptop is on all the time
View 2 Replies
View Related
Sep 24, 2012
Having a design where an IBM bladecenter has two Nexus 4001i switches and each switch is connected to a Nexus 5k vPC pair, is it possible to configure active-active nic teaming on the hosts (blades) considering that the Nexus 4k switches are unaware of each other and blade has one connection to each 4k over either emulex or qlogic 10G CNA?
View 1 Replies
View Related
Feb 1, 2013
I got my XPS L322X yesterday, and this problem occured from the first time I turned on my laptop. Everytime I turned on or restarted my computer, I could connect to my wifi router, and everything works well in the first 3-5 minutes. But later the wifi connection turned to "limit", and if I searched for the networks again, all wifi hotspots disappeared!
And if this problem popped up, there would be a follow-up problem -- I could not turn off my computer nor restart it! If I tried to restart the computer, it stayed on the "restarting" screen for 5 minutes, and a "power_start_up_failour" error warning later. If I then restarted the computer by pushing the power button for 5 seconds, it showed that the network adapter was disabled. Enableing the adapter would start this whole problem all over again!
View 2 Replies
View Related
