I have a Dell vostro 1320 and am having trouble getting a driver fot the wireless lan in xp. Any driver or a link to one.It is described as a network controller and I am assuming this is the wireless lan. Broadcom bcm 4312.802 rev 01.
View 1 Repliesdownlaoding wifi drivers for dell vostro 1015.
View 1 Replies View Relatedi have re-installed windows xp in my laptop Dell Vostro 1400. it came with Vista but i have formatted and installed registered xp in it. when i installed WiFi driver in it (downloaded form Dell site), the driver works fine but because of this driver my machine gets stuck right after startup (when its shows the desktop). i was thinking that maybe its windows defect but now i came to know that when i uninstall the driver, it dont stuck.. i have tried a lot of drivers from Dell site. specifically for this model.
View 14 Replies View RelatedI have the same machine, same problems. After a reformat, WindowsXP would not reload drivers (from the OEM software provided by DELL). I reinstalled (in order) with a fair amount of difficulty got them all to load EXCEPT for the network adapter. I've download the adapter software AND driver; still no luck. Still working on this bugaboo. Incidentally, what saved me with the other drivers (yellow question marks on Base System Device controller, ethernet, PCI, SM Bus, etc) is that I had run a Belarc Advisor utility printout prior to the reformat. So now I at least had something to compare the before and after reformat with.
View 2 Replies View RelatedI recently had to wipe my Vostro 1710 Laptop, and start brand new. However, my drivers disk is broken, and will not install the drivers.I can not seem to find the correct internet driver to download to get my wifi up and running, and it's kinda important that I do. What is the process of finding these drivers, and transferring them via USB stick from my desktop to my Laptop?
View 5 Replies View RelatedI have been using Dell Vostro-1320 laptop with Windows XP. It was running good. Recently I have installed the McAfee Internet Security software. But now I do not have internet access through this laptop although the network icon shows "connected". I have tried all the advice/solutions for such type of problem by doing Firewall off/on and changing adapter & network setting. I also updated all the drivers. But nothing works. It is notable that my other desktop is working properly in spite of installing this software.
View 4 Replies View Relatedi installed all the drivers i need and it still wont install broadcom 802.11n , i have been on the phone with till for almost an hour.
View 2 Replies View RelatedI have a Vostro 1500 and cannot connect to a wireless network with a dell 1395 WLAN minicard os XP home, what are possible solutions?
View 1 Replies View RelatedI use windows 8 32-bit ,, and the Bluetooth app can't support in this system ,,
i always use R273948 and R226746 in windows 7 to apply the Bluetooth app but windows 8 can't supply that app ... .
So I bought Dell Latitude E6530. I noticed they were a lot of things missing, since I went to see in the Device Manager. After fixing so many, I have ended up with these. When I connect my laptop through A wire cable, it does connect but when I slide the wireless switch, it enables the Bluetooth but not the wireless, I have enabled Wireless in BIOS and yet nothing.
View 4 Replies View RelatedPurchased the Broadcom wifi 1450 mini card (BCM94309MP) and installed it in the Inspiron 5100 plugging in the pig tails too. Computer recognized it and attempted to install using plug and play XP. Displayed the message that the driver(s) were missing. Went to Broadcom website and found the driver dl site clicked on the BCM94309M site but no driver(s) download available. Where I can download the drivers?
View 2 Replies View RelatedLatitude D400 Win XP sp3. My wireless mini-pci card seems to have died. To replace the original card I bought a Broadcom BCM94318 (model WL5011s (TECOM) ) that was listed as compatible in a D400. No drivers just the hardware. My machine recognizes that the card is physically there but I do not have a drivers for it. Where can I get a driver that works?
View 4 Replies View RelatedWant to use WOL on 8300 with Broadcom Netlink card. Everything seems to be configured correctly: bios, network card, port forwarding etc. In fact I can wake up the 8300 over the internet following a complete shut down, but only if I do it within 3 secs or so, then it fires up OK. If I wait a little longer it will not respond to the Magic packet. I notice something strange which I suspect may be related: when I restart the PC, in the power management of the Broadcom card the box is checked that allows te computer to turn off the Broadcom card to save power, while I am sure that I unchecked it before shutdown. I suspect this setting is somehow overwritten by Windows. mentioned all BIOS setting are to enable WOL. As if Windows is ensuring that the Broadcom card is powered down so it cannot receive the Magic packet to initiate a startup.
View 8 Replies View RelatedI'm trying to get my local MAC address changed for Broadcom NetXtreme 57xx adapter in D620 running winXP. Based on Broadcom advice this should be pretty straightforward.In Microsoft Windows, right-click the Network Adapter in Network Connections and then click Properties. Click the Configure button and then the General tab. Configure the "Locally Administered Address" parameter by assigning a unique node address for the adapter. Netware: The Mac Address is configured by the adding Node=XXXXXXXXXXXX parameter to driver load command line in the AUTOEXEC.NCF file, where XXXXXXXXXXXX is the Locally Administered address.
However after clicking "configure" in "general" tab I see only "Driver Details, Update Driver, Roll Back Driver, Uninstall" buttons, on "advanced" tab I see "802.1p QOS", "Flow Control" "Speed and Duplex" and "Wake up Capabilities", however I CAN'T see "Locally Administered Address".I've tried :
- reinstalling drivers, at the moment using latest from Broadcom, from 2006-12-15
- reinstalling Dell's drivers
- installing Broadcom's Control suite
I have been trying to update my boradcom 5709c firware, or more acurrately trying to install the Broadcom Network Device firmware, family version 5.2.7 from the drivers page for my PowerEdge T110 running Server 2008 R2 Enterprise x64. Once the package extract and starts running, I am getting an error that simply says "BMAPI Error", and the program bails out. I really need to update this firmware, and have been looking for manual steps and other ways to get it done and have come up short.
Any other ways to get the firmware to update.
We have a Power Edge T310, sporting two Broadcom 5716C LOM's. We also have a Power Connect 5524 switch. Good opportunity to team the two network connections using 'Link Aggregation (802.3ad)'. Downloaded the most recent management software off the Broad com site. Installed BACS 3 on the Power Edge, running Windows SBS 2011, which has Windows Server 2008 r2 x64 as it's base.
Started BACS and tried to configure teaming. But there's no teaming-section in BACS. I removed, restarted the server and re-installed the Broad com software, but still no teaming section? How do I solve this?
I have two of these computers side by side. The card in issue is recognized, but says no driver. I have copied the driver from the good 580e, downloaded everything I could, and cannot get it? Using Win7, 64 bit, comcast DSL. The bad one just stopped working?
View 1 Replies View RelatedA few days ago, I noticed that my computer wasn't picking up my wired connection anymore while the wireless connection was still working fine. I opened up my network adapters and my Local Area Connection adapter wasn't even showing anymore, only the Wireless adapter. I updated my drivers, tried different cables and even a different router but still no dice. This morning, when I booted up my system, Windows said it was installing driver software for Broadcom Gigabit Ethernet Controller. I got really excited when I saw Local Area Connection in my adapter menu and plugged in my ethernet cable. Nothing happened and my laptop refuses to recognize the ethernet cable plugged in to it. It's a Dell XPS 1640, Windows 7 x64 with Service Pack 1.
P.S. Usually a little orange light appears in the ethernet port on my computer when a chord is plugged in. When I turned on my computer this morning with the chord in, the light was on. When Windows finished booting, the light went off.
My wifes Dell D600n with with Intel 2200BG wireless G card was Extremely difficult to get access to internet at first @ 54Mbps, but achieved it after 3 weeks of trying, after I had replaced motherboard, to fix battery charging issue.
The current problem, that i cannot seem to surmount is: I replaced the wireless card with a newer Broadcom BCM43222, Dual band N wireless card, that should be capable of connecting at almost 6 times the speed of the older G card. Unfortunately, the new card seems unable to connect at all.
ADDITIONAL INFORMATION: The wireless switch via keyboard Fn & F2, has been on the entire time. I've tried a couple of different drivers, to no avail. Ive uninstalled/ reinstalled both the card and drivers several times, still no connection. The device manager reports the card is off, at all times, and i cannot find any way to alter this, but, despite the fact that this sounds like it could definitely cause no connection, this is unlikely to be the reason, because it has reported that the wireless card is off at all times since the new Motherboard was installed, and the Wireless G card worked perfectly for the past 2 months, and still does, while the device manager was all the while reporting it was off.
Also the wired broadband connection, via cat 5, had never worked after changing MOBO, Nor did the Dial up modem, til both modem and Ethernet came to life, last night after reinstalling drivers for both the modem and Ethernet. unfortunately doing the same thing for wireless had no effect. All this time the Intel wireless G card has, and still does work perfectly every time i remove the Broadcom Wireless N card and plug the G card back in. Until lastnight, The device manager reported the wireless card had no driver installed. now it recognizes the driver is installed but still cannot connect wirelessly One wireless card driver I tried was called: BROADCOM_ABGN_DD-WRT.zip. I lost track of the name of the other driver that i've been trying. Someone on another forum said after installing BROADCOM_ABGN... That one must go to device manager advanced properties and select US from choices of US, Japan, or Germany, To get this driver to work. I've tried this too. Again, No improvement.
Ive built my own computers for the past 30 years, and repair them all the time, for hardware problems, but I fear software is not my forte. My son, who is better at software. Usually, together, we can solve any mechanical electronic or software malfunction, but we're both stumped by this one. Admittedly, we all sometimes overlook a simple solution while seeking a very difficult one. Whenever I face a difficult malfunction like this, I think of when as a 5 year old I was privileged to accompany my Engineer big brother to a local Airport to repair what i would later learn was a Automatic Direction Finder System, needed before flight. As I sat beside my on the tarmac, watching him sweat bullets trying to effect a quick fix, I noticed something that looked out of place to me, and started chanting his name, Ronnie, Ronnie, Ronnie... ad infinitum, as kids are like to do, til in desperation he finally dropped his screwdriver withwhich he aws about to dismantle the entire mechanism, and fairly yelled what?, to which I asked timidly, Ronnie are all those lightbulb things (electron tubes) supposed to be lit. he said of course!, and continued working, ignoring me for another hour. Finally when he stopped to scratch his head, I said "If they're all supposed to be lit why is one of them not lit? he insisted they all were, but was adamant that they weren't. when he asked which one, and i pointed to it. He tested it verifying the filament was, indeed, open, and demanded to know why id watched for 4 hours and hadn't said that before.
I just bought an XPS 8300 brand new.After woeking OK a few days, now it connects to the Broadcom Netlink Communication card only after rebooting 3-4 times at cold-start.
All the other home computers are connecting from the first shot. (two laptops and another desktop. They much slower computers.At the begining I have re-installed the driver (from DVD and downloaded), but not this is the problem.
The computer has to get a bit warm.When it does not connect, the Dell Test tool DOES NOT SEE (does not appear in the test list) the Broadcom NetLink Gigabite Ethernet card.
I have a Dell Inspiron 1525 that suddenly has an issue with Wireless Networking. When I try and troubleshoot it shows me that the Broadcom 802.11 Multiband Network Adapter has a Code 10 error and says the "device cannot start." I have tried uninstalling and updating the driver, but it just continues to tell me that it has the best driver every-time I try and update it.If I plug the laptop in to the router with a wired connection it works just fine, so it is obviously an issue with the wireless adapter.what I should do in order to get this to take a new driver so it works again?
View 7 Replies View RelatedI recently got a Dell Latitude D600. I know, it's outdated. I'm running Windows XP SP3.
My problem is that after installing all of the drivers for the Broadcom 570x Gigabit Intergrated Controller, I can't get the wireless to pop up in the bottom right hand corner. I can only connect with an Ethernet cable directly from my router. I have tried many things, even support packages, but I can't seem to get it to work. I've also tried Fn+F2. Also, in the Device Manager I see a "Network Controller" but it has a question mark that is yellow beside it, and I can't seem to install it.
I bought one from outlet. It has WiMax as an option. It seems it has WiMax, but I can' see any wifi device in Device manager. It is ridiculous. I surprised so I checked my order confirmation e-mail again and again, but it reads "Intel Centrino Advanced-N + WiMAX 6150", not WiMax only.
View 17 Replies View RelatedBought a Vostro 220S about 2 months ago. After about three weeks, while I'm using it, the integrated NIC dies. All of a sudden I get the "Network Cable Disconnected" pop-up. No LEDs lit by the network jack. Contact Dell support who decides it's the motherboard.Three days later, the exact same failure. Contact support again. This time they want me to re-install Windows (yeah...right). I refused since the motherboard fixed it the first time. They finally agree to replace the motherboard again. Using the same router and cable that worked for years with my old computer. After the first failure, I switched ports on the router. While waiting for the motherboard replacements, I had installed an old PCI NIC I had laying around. Worked fine...still is. I'm not about to re-install Windows, which is what I know they'll want. I'll stick with the PCI card. Both of the people at Dell support as well as the tech they sent out told me they've not seen this before.
View 6 Replies View RelatedI just bought a brand new dell vostro 3460. for some reson the signal (WiFi signal) is poor and even disconccect from time to time and the internet surf is very slow.
the computer is located at the same place as two others laptop i have (the two others ave perfect signal).
my wifi keeps disconnecting after certain period (15-100 min usually)
i have Dell Vostro 3560, WINDOWS 8,64 BIT.
I have an lan / modem card without drivers and cant find them on support drivers website .i have dp/n 06158u revA00 the card manufacturer is Action Tec and other markings on the card is DS/N TW-06158U-44432-1AF-1803
View 1 Replies View RelatedI have a dell vostro 3700 and have had it for about 3 years with no problems. Lately it has been picky on when it will let me use my home wifi it will say "restricted use". Then today it stop working all together and says that no network connections are available, but they are because everyone else's computers in my house are working.
View 3 Replies View RelatedI recently received the blue screen and had to do a clean install of Windows XP on my Dell Vostro 1520. I then proceeded to install the Dell drivers and downloads in the order according to Dell's website. But the wireless driver continually gave me a Setup.rul 380 error, so I did a manual install of that. Unfortunately something is still incorrect. The internet connects, but the wireless icon at the bottom has a pop that says "Adapter Problem. Driver is not installed." I don't know a lot about computers and I'm not sure if I did something wrong, but I can't figure this one out.
View 5 Replies View RelatedI have an employee using a Vostro 1015 Config 020, Genuine Windows® 7 Professional, 32bit laptop in Ireland. A local tech there told her " that with new laptops you don’t need to use a converter because they have a built in one", and I need to find out if that is true.
View 1 Replies View RelatedI have Dell Vostro 1550 Laptop.Os- window 7 ,32 bit.Earlier I had window 7,64 bit on my laptop ,when I install 32 bit window on it after a clean format, Everything work perfectly except the bluetooth.I tried several bluetooth drivers but none of them fix my problem.I received an error while installing the bluetooth driver that the" system has been modified can't install the driver".when I tried another driver then it says please activate bluetooth first ,when I did so by pressing the function keys then a message appears on the screen saying "starting bluetooth" after few minutes the msg disappears and nothing happens,it doesn't start the bluetooth.
View 3 Replies View RelatedI have a vostro 1500, 1395wland mini card and cannot connect to a wireless network any possible solutions? OS is win XP Home
View 1 Replies View RelatedI am struggling for a windows XP network driver on Vostro 260,I cannot imagine there is no one, but I loaded a driver from Realtek, containing a driver for the reference found in the identification of the interface (DEV_8168&SUBSYS_04EE1028&REV_06).
I installed, but the interface is not starting. What to do?