Dell :: Update Broadcom 5709C Firmware BMAPI Error
Aug 26, 2010
I have been trying to update my boradcom 5709c firware, or more acurrately trying to install the Broadcom Network Device firmware, family version 5.2.7 from the drivers page for my PowerEdge T110 running Server 2008 R2 Enterprise x64. Once the package extract and starts running, I am getting an error that simply says "BMAPI Error", and the program bails out. I really need to update this firmware, and have been looking for manual steps and other ways to get it done and have come up short.
Any other ways to get the firmware to update.
View 5 Replies
ADVERTISEMENT
Sep 2, 2012
I get this error when I update to 1.12. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
View 3 Replies
View Related
Feb 15, 2013
I am using DIR 615 Hardware Version JX... When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site. I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page. Which doesn't even list Rev Jx as an option.I am having a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]
View 1 Replies
View Related
Jun 17, 2012
One of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message: Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.but the same image works fine on another 5508. The update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?
View 1 Replies
View Related
Sep 20, 2011
I have an WRT54G2, and I recently bought an new notebook and a new mobile phone. The question is none can connect to my wireless network.My linksys had the following configuration:
Firmware 1.0.03
SSID hidden
WPA2 personal + AES
My note is an ACER 5552-5664 running Ubuntu 11.04 and Windows 7, in Ubuntu I can’t use the wireless. In Windows it works fine.The phone is a Samsung Galaxy and do no connect in the wireless.I had an old notebook running only Windows 7 that works fine too.In my father’s home there is an WRT54G and all my equipment connected there. Other problem is that when I tried to update the firmware, it simple don’t update. I’ve downloaded the last firmware file from Cisco’s page.
View 3 Replies
View Related
Jun 9, 2007
I downloaded an update for the 1370 wireless card from the microsoft site and now my wireless network doesn't work. I went to the dell site and got the driver directly from the dell site (R140747.EXE) and it fails after it reached 59% complete. I tried another download recommended from this forum (R151519.EXE) and the same error at 59%. I have tried everything I have seen in the forums (closing virus software, editting setup ini file, etc) and I still get Update 778 error at 59%. I am running on an Inspirion 6000, CARD (CIRCUIT), IRELESS, MINI PCI CARD, 1370, BROADCOM CORPORATION, Dlink wireless router, windows xp with sp2, USA. I have also received an error that says something about internal setting incompatible (unfortunately I didn't capture the exact wording - I will attempt to recreate the error) This is terribly frustrating considering I was only following the dell suggestion that I update the driver and now that I attempted it, my laptop is sitting not being used.
View 5 Replies
View Related
Nov 28, 2012
i installed all the drivers i need and it still wont install broadcom 802.11n , i have been on the phone with till for almost an hour.
View 2 Replies
View Related
Dec 9, 2012
I use windows 8 32-bit ,, and the Bluetooth app can't support in this system ,,
i always use R273948 and R226746 in windows 7 to apply the Bluetooth app but windows 8 can't supply that app ... .
View 4 Replies
View Related
Oct 24, 2011
I have a Dell vostro 1320 and am having trouble getting a driver fot the wireless lan in xp. Any driver or a link to one.It is described as a network controller and I am assuming this is the wireless lan. Broadcom bcm 4312.802 rev 01.
View 1 Replies
View Related
Jun 29, 2013
So I bought Dell Latitude E6530. I noticed they were a lot of things missing, since I went to see in the Device Manager. After fixing so many, I have ended up with these. When I connect my laptop through A wire cable, it does connect but when I slide the wireless switch, it enables the Bluetooth but not the wireless, I have enabled Wireless in BIOS and yet nothing.
View 4 Replies
View Related
Jul 27, 2005
Purchased the Broadcom wifi 1450 mini card (BCM94309MP) and installed it in the Inspiron 5100 plugging in the pig tails too. Computer recognized it and attempted to install using plug and play XP. Displayed the message that the driver(s) were missing. Went to Broadcom website and found the driver dl site clicked on the BCM94309M site but no driver(s) download available. Where I can download the drivers?
View 2 Replies
View Related
Sep 10, 2012
Latitude D400 Win XP sp3. My wireless mini-pci card seems to have died. To replace the original card I bought a Broadcom BCM94318 (model WL5011s (TECOM) ) that was listed as compatible in a D400. No drivers just the hardware. My machine recognizes that the card is physically there but I do not have a drivers for it. Where can I get a driver that works?
View 4 Replies
View Related
Aug 21, 2011
Want to use WOL on 8300 with Broadcom Netlink card. Everything seems to be configured correctly: bios, network card, port forwarding etc. In fact I can wake up the 8300 over the internet following a complete shut down, but only if I do it within 3 secs or so, then it fires up OK. If I wait a little longer it will not respond to the Magic packet. I notice something strange which I suspect may be related: when I restart the PC, in the power management of the Broadcom card the box is checked that allows te computer to turn off the Broadcom card to save power, while I am sure that I unchecked it before shutdown. I suspect this setting is somehow overwritten by Windows. mentioned all BIOS setting are to enable WOL. As if Windows is ensuring that the Broadcom card is powered down so it cannot receive the Magic packet to initiate a startup.
View 8 Replies
View Related
Mar 2, 2007
I'm trying to get my local MAC address changed for Broadcom NetXtreme 57xx adapter in D620 running winXP. Based on Broadcom advice this should be pretty straightforward.In Microsoft Windows, right-click the Network Adapter in Network Connections and then click Properties. Click the Configure button and then the General tab. Configure the "Locally Administered Address" parameter by assigning a unique node address for the adapter. Netware: The Mac Address is configured by the adding Node=XXXXXXXXXXXX parameter to driver load command line in the AUTOEXEC.NCF file, where XXXXXXXXXXXX is the Locally Administered address.
However after clicking "configure" in "general" tab I see only "Driver Details, Update Driver, Roll Back Driver, Uninstall" buttons, on "advanced" tab I see "802.1p QOS", "Flow Control" "Speed and Duplex" and "Wake up Capabilities", however I CAN'T see "Locally Administered Address".I've tried :
- reinstalling drivers, at the moment using latest from Broadcom, from 2006-12-15
- reinstalling Dell's drivers
- installing Broadcom's Control suite
View 5 Replies
View Related
Nov 27, 2011
We have a Power Edge T310, sporting two Broadcom 5716C LOM's. We also have a Power Connect 5524 switch. Good opportunity to team the two network connections using 'Link Aggregation (802.3ad)'. Downloaded the most recent management software off the Broad com site. Installed BACS 3 on the Power Edge, running Windows SBS 2011, which has Windows Server 2008 r2 x64 as it's base.
Started BACS and tried to configure teaming. But there's no teaming-section in BACS. I removed, restarted the server and re-installed the Broad com software, but still no teaming section? How do I solve this?
View 1 Replies
View Related
Aug 10, 2012
I have two of these computers side by side. The card in issue is recognized, but says no driver. I have copied the driver from the good 580e, downloaded everything I could, and cannot get it? Using Win7, 64 bit, comcast DSL. The bad one just stopped working?
View 1 Replies
View Related
Mar 1, 2011
A few days ago, I noticed that my computer wasn't picking up my wired connection anymore while the wireless connection was still working fine. I opened up my network adapters and my Local Area Connection adapter wasn't even showing anymore, only the Wireless adapter. I updated my drivers, tried different cables and even a different router but still no dice. This morning, when I booted up my system, Windows said it was installing driver software for Broadcom Gigabit Ethernet Controller. I got really excited when I saw Local Area Connection in my adapter menu and plugged in my ethernet cable. Nothing happened and my laptop refuses to recognize the ethernet cable plugged in to it. It's a Dell XPS 1640, Windows 7 x64 with Service Pack 1.
P.S. Usually a little orange light appears in the ethernet port on my computer when a chord is plugged in. When I turned on my computer this morning with the chord in, the light was on. When Windows finished booting, the light went off.
View 6 Replies
View Related
Aug 4, 2012
My wifes Dell D600n with with Intel 2200BG wireless G card was Extremely difficult to get access to internet at first @ 54Mbps, but achieved it after 3 weeks of trying, after I had replaced motherboard, to fix battery charging issue.
The current problem, that i cannot seem to surmount is: I replaced the wireless card with a newer Broadcom BCM43222, Dual band N wireless card, that should be capable of connecting at almost 6 times the speed of the older G card. Unfortunately, the new card seems unable to connect at all.
ADDITIONAL INFORMATION: The wireless switch via keyboard Fn & F2, has been on the entire time. I've tried a couple of different drivers, to no avail. Ive uninstalled/ reinstalled both the card and drivers several times, still no connection. The device manager reports the card is off, at all times, and i cannot find any way to alter this, but, despite the fact that this sounds like it could definitely cause no connection, this is unlikely to be the reason, because it has reported that the wireless card is off at all times since the new Motherboard was installed, and the Wireless G card worked perfectly for the past 2 months, and still does, while the device manager was all the while reporting it was off.
Also the wired broadband connection, via cat 5, had never worked after changing MOBO, Nor did the Dial up modem, til both modem and Ethernet came to life, last night after reinstalling drivers for both the modem and Ethernet. unfortunately doing the same thing for wireless had no effect. All this time the Intel wireless G card has, and still does work perfectly every time i remove the Broadcom Wireless N card and plug the G card back in. Until lastnight, The device manager reported the wireless card had no driver installed. now it recognizes the driver is installed but still cannot connect wirelessly One wireless card driver I tried was called: BROADCOM_ABGN_DD-WRT.zip. I lost track of the name of the other driver that i've been trying. Someone on another forum said after installing BROADCOM_ABGN... That one must go to device manager advanced properties and select US from choices of US, Japan, or Germany, To get this driver to work. I've tried this too. Again, No improvement.
Ive built my own computers for the past 30 years, and repair them all the time, for hardware problems, but I fear software is not my forte. My son, who is better at software. Usually, together, we can solve any mechanical electronic or software malfunction, but we're both stumped by this one. Admittedly, we all sometimes overlook a simple solution while seeking a very difficult one. Whenever I face a difficult malfunction like this, I think of when as a 5 year old I was privileged to accompany my Engineer big brother to a local Airport to repair what i would later learn was a Automatic Direction Finder System, needed before flight. As I sat beside my on the tarmac, watching him sweat bullets trying to effect a quick fix, I noticed something that looked out of place to me, and started chanting his name, Ronnie, Ronnie, Ronnie... ad infinitum, as kids are like to do, til in desperation he finally dropped his screwdriver withwhich he aws about to dismantle the entire mechanism, and fairly yelled what?, to which I asked timidly, Ronnie are all those lightbulb things (electron tubes) supposed to be lit. he said of course!, and continued working, ignoring me for another hour. Finally when he stopped to scratch his head, I said "If they're all supposed to be lit why is one of them not lit? he insisted they all were, but was adamant that they weren't. when he asked which one, and i pointed to it. He tested it verifying the filament was, indeed, open, and demanded to know why id watched for 4 hours and hadn't said that before.
View 2 Replies
View Related
Oct 26, 2011
I just bought an XPS 8300 brand new.After woeking OK a few days, now it connects to the Broadcom Netlink Communication card only after rebooting 3-4 times at cold-start.
All the other home computers are connecting from the first shot. (two laptops and another desktop. They much slower computers.At the begining I have re-installed the driver (from DVD and downloaded), but not this is the problem.
The computer has to get a bit warm.When it does not connect, the Dell Test tool DOES NOT SEE (does not appear in the test list) the Broadcom NetLink Gigabite Ethernet card.
View 285 Replies
View Related
Oct 29, 2011
I have a Dell Inspiron 1525 that suddenly has an issue with Wireless Networking. When I try and troubleshoot it shows me that the Broadcom 802.11 Multiband Network Adapter has a Code 10 error and says the "device cannot start." I have tried uninstalling and updating the driver, but it just continues to tell me that it has the best driver every-time I try and update it.If I plug the laptop in to the router with a wired connection it works just fine, so it is obviously an issue with the wireless adapter.what I should do in order to get this to take a new driver so it works again?
View 7 Replies
View Related
Oct 13, 2012
I recently got a Dell Latitude D600. I know, it's outdated. I'm running Windows XP SP3.
My problem is that after installing all of the drivers for the Broadcom 570x Gigabit Intergrated Controller, I can't get the wireless to pop up in the bottom right hand corner. I can only connect with an Ethernet cable directly from my router. I have tried many things, even support packages, but I can't seem to get it to work. I've also tried Fn+F2. Also, in the Device Manager I see a "Network Controller" but it has a question mark that is yellow beside it, and I can't seem to install it.
View 3 Replies
View Related
May 21, 2012
I have a P-660HW-T1 v3 its using V3.70(BYD.1) | 02/11/2010.when I try to update it to 3.70(BJZ.10)C0 the update fails to succeed.
View 1 Replies
View Related
Oct 1, 2012
I have REV A and the firmwars version is 1.04. I want to upgrade to ver 1.35. I have downloaded the firmware to my computer. When I login to the router page and go to the firmware tab, when I try to click browse for the file nothing happens. I have tried using Internet Explorer and Firefox.
View 2 Replies
View Related
Nov 12, 2011
I have a DIR-615 router, hardware rev. C1 running firmware v. 3.10, dated 4/17/09. I've been beating my head against the wall trying to get this router to properly forward ports for a bit torrent application, but it not only won't do that, it doesn't want to save DHCP reservations and it doesn't want to recognize my computer on the LAN if I set a static IP address (although it does allow my computer to connect and get an internet connection). From the D-Link website, the description of firmware update 3.12NA looks like it might take care of these problems, but I can't get the router to update. When I log into the router and check for updates, it returns a message saying the latest update is v. 3.11, dated 9/15/09. However, when I attempt to download the update, nothing happens. The D-Link website offers update 3.11NA (4/20/09), 3.12NA (3/8/10), and 3.13NA (9/30/10). Why does the website offer me a different update than the router itself? I downloaded 3.13NA and unzipped the folder, which has a text file and a .bin file; I presume the latter is the update. However, when I browse to this file and attempt to upload it to the router, nothing happens. How the heck do I update this router?
View 5 Replies
View Related
Jun 5, 2011
My roommates and I keep getting knocked off the internet every few minutes on the router so I've tried a bunch of the tricks found here and am trying to also update the firmware. I downloaded the newest firmware, uploaded it to the router and it says it succeeded in the update, but then after reboot gives the same version it came with.
View 1 Replies
View Related
Apr 19, 2011
Here's what we have at the house;
1 - Motorola Modem (horrible ISP)
2 - Dlink DIR 655 wireless router (about 2-3 years old)
3 - 2 laptops (windows 7/both)
4 - DirecTV broadband box (can't remember how that hooked up to the router?)
5 - Playstation 3
6 - (3) DTV sat receivers
The problem started while trying to connect the PS3 to the existing network. Only one laptop is wifi, the other laptop and Ps3 are in my room and wired in to the router, and the strange little DirecTV box is in the wired mix(for on-demand i guess?) The PS3 could not log-in to the PSNetwork(still can't), but it could browse the web just fine. So I start manually typing in IP addresses, 6 IP's in all, including the sharing of 3 DTV boxes that show up on the network on my admin laptop. Didn't work, so I get into the DLink router URL and start opening up ports that PSNetwork uses. At this point I think I have it figured out, then I did a firmware update on the router. My laptop, the PS3(internet, no PSNetwork) and even the little DTV box was working fine, all wired in, using 3 of the four ports. The old lady's laptop in the living room not only couldn't get on-line, it couldn't detect a wifi network? So try to set up a new real quick before I left this AM.. No beans!! I looked at the specs for the router, the firmware is up to date but from early 2010, and the features say "NO" to gaming support..
Do I get another router that can handle all the devices and is PS3 friendly, if that's even a thing!? I can't roll back the firmware update cause I wasn't able to back up the settings, and honestly theres a good chance I did something really bad as far as trying to tweak that router to open up ports for the specific IP address that goes to the game console. We'll call it 191.55.55.99. When I thought I was finished, the PS3 IP address had switched to 191.55.55.98? So it dropped down a number, I thought it was static, and all my efforts were for the --99 IP address, basically I have network issues consisting of Satalite tv boxes, a public DTV share folder, a video game console, one wired and one wireless, and a router that I WANT TO SET ON FIRE!
View 12 Replies
View Related
Jan 14, 2013
I have been using the Asus RT-n53 for about a year now and had little to no problems with it. Lately, my wife's iPhone has been dropping its connection to the RT-n53. It was probably a problem with her piece of apple crap, but I thought I would update the firmware on the RT-n53. I found that my firmware was way out of date, so I updated to the latest version.
With the newest firmware installed, I can no longer detect the 5Ghz band with my PlayBook. Before the update, all of the other devices in the house were not 5Ghz capable, so my PlayBook was the only device that used the 5Ghz radio on the RT-n53. Now, the SSID for the 5Ghz band just isn't there any more. In the configuration settings for the RT-n53, everything points to "it should be working"... 5Ghz radio is enabled, SSID broadcast is enabled. I have tried changing the wireless mode from "N Only" to "Auto" to "Legacy". I have fiddled with channel settings, encryption settings, etc. Even tried changing the SSID a few times. Multiple reboot, and still, the 5Ghz SSID just doesn't appear on any devices.
View 3 Replies
View Related
Dec 8, 2011
I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware
View 4 Replies
View Related
Aug 5, 2012
I tried to proceed with the update of the firmware on my DIR-835 router. I want to install version 1.0.2 of the firmware.I tried without success with Chrome and IE9. I get to a blank page and nothing downloads IE9 A PDF file is downloading but not the firmware update itself
View 1 Replies
View Related
Dec 7, 2012
I am currently on fw 1.33NA and it works fine just want to update so it works better I've tried the reset to factory and unplugged the internet port and ive tried fw 2.0NA and 2.10NA
View 2 Replies
View Related
Feb 21, 2012
updating to 2.03NA seems to be working for a lot of people. Anyway, my current NAT type is Strict ugh. I used to have a DIR-615 router. Man oh man that worked so well. But I had to replace it since it conked out after a 6 year stint.
View 1 Replies
View Related
Dec 7, 2011
I have dap-1522 version A Browser IE8 with lestest updates.
I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.
I try three different way to download it, could the file be bad on dlinks web site?
View 4 Replies
View Related
Oct 3, 2011
I just bought my DIR-825 from Frys and it came stock with 2.02NA B1 firmware, but everytime I try to update it to 2.03/2.04/2.05/2.06 it errors saying it might not be the same hardware or something on the lines of that. But now when I try to upload it, it just leads me to "192.168.0.1 was interrupted" and can't even get to the error screen now.I'm not too savvy when it comes to routers, especially a D-Link since previously I had a Linksys WRT54GL
View 15 Replies
View Related
