D-Link DCS-942L :: Getting Error 324 On Firmware Update

Sep 2, 2012

I get this error when I update to 1.12. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

View 3 Replies


D-Link DCS-942L :: Setup Fine But Failed Firmware Update

Jan 17, 2012

Had just purchased a new DCS942L unit and had it setup fine.  Registered it on the web and the web  stated that it needed a firmware update.  Connected with hard line and started update.  After 5min webapp said device timed out.  When I went to rest camera could no longer get a connection of any kind.

View 1 Replies View Related

D-Link DIR-615 :: Jx Firmware Update Error Did Not Get Information

Feb 15, 2013

I am using DIR 615 Hardware Version JX...  When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site.  I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page.  Which doesn't even list Rev Jx as an option.I am having  a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]

View 1 Replies View Related

D-Link DCS-942L :: Cannot Update Motion Detection

Nov 2, 2012

I have been having no luck with DLink support getting an answer. I have the DCS-942L which allows me to set the date/time zone but when I try to add motion detection settings the page always times out during the save. I tried using CaT-5 CABLE instead of wifi for settings (camera on same router and desktop pc) but after the "saving" message appears, it eventually times out and I have to click the Back arrow to return only to find none of my settings saved. I also want to note that each time I log in I see a broken certificate error message. Using Win8 with IE10. Also tried on Win7 with IE9 and XP Pro with IE8.

View 3 Replies View Related

D-link Dcs-942l :: Do Not Upgrade Firmware Over Wifi?

Jun 25, 2012

Well this one should be in the "Firmware DOs and DONTs" post. I updated to FW 1.11 over wifi and apparently this will corrupt the camera so it needs serviving. Would have been nice to know that before I did it. Since the upgrade from 1.02 1030 I get this note:The throughput of the SD Card on your camera is not currently enough for recording. We suggest you to reformat the SD Card or replace it with a higher class one.

View 12 Replies View Related

Cisco Wireless :: 5508Wlc Needs Firmware Update But Gets Error Always

Jun 17, 2012

One of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message: Error Message   %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.but the same image works fine on another 5508. The update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?

View 1 Replies View Related

Dell :: Update Broadcom 5709C Firmware BMAPI Error

Aug 26, 2010

I have been trying to update my boradcom 5709c firware, or more acurrately trying to install the Broadcom Network Device firmware, family version 5.2.7 from the drivers page for my PowerEdge T110 running Server 2008 R2 Enterprise x64. Once the package extract and starts running, I am getting an error that simply says "BMAPI Error", and the program bails out.  I really need to update this firmware, and have been looking for manual steps and other ways to get it done and have come up short. 

Any other ways to get the firmware to update.

View 5 Replies View Related

D-Link DCS-942L :: Cannot View Playback After Latest Firmware Upgrade

May 12, 2013

I have a DCS-942L.  Everything was working fine on my setup until I upgraded the firmware the other day. In the mydlink.com website when I logged in that day, it stated a firmware upgraded was needed.  So I clicked on upgrade, let it run its thing and then tried to view the playback and now the thumbnails are just black and when I click on one, it looks like it is loading but then shows the quicktime icon with a question mark over it.  I upgraded my Quicktime component and that didn't fix it either.  So I went into advanced settings, downloaded the new firmware upgrade from there by saving the zip file and uploading it via the advanced settings website, and still nothing.  I have another camera, same setup, that I have not upgraded firmware on yet and that playback is working fine.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 Firmware Update And Connection Error

Sep 20, 2011

I have an WRT54G2, and I recently bought an new notebook and a new mobile phone. The question is none can connect to my wireless network.My linksys had the following configuration:

Firmware 1.0.03
SSID hidden
WPA2 personal + AES
My note is an ACER 5552-5664 running Ubuntu 11.04 and Windows 7, in Ubuntu I can’t use the wireless. In Windows it works fine.The phone is a Samsung Galaxy and do no connect in the wireless.I had an old notebook running only Windows 7 that works fine too.In my father’s home there is an WRT54G and all my equipment connected there. Other problem is that when I tried to update the firmware, it simple don’t update. I’ve downloaded the last firmware file from Cisco’s page.

View 3 Replies View Related

D-Link DIR-655 :: Can't Update Firmware

Oct 1, 2012

I have REV A and the firmwars version is 1.04.  I want to upgrade to ver 1.35.  I have downloaded the firmware to my computer.  When I login to the router page and go to the firmware tab, when I try to click browse for the file nothing happens.  I have tried using Internet Explorer and Firefox.

View 2 Replies View Related

D-Link DIR-615 :: Can't Update Firmware

Nov 12, 2011

I have a DIR-615 router, hardware rev. C1 running firmware v. 3.10, dated 4/17/09.  I've been beating my head against the wall trying to get this router to properly forward ports for a bit torrent application, but it not only won't do that, it doesn't want to save DHCP reservations and it doesn't want to recognize my computer on the LAN if I set a static IP address (although it does allow my computer to connect and get an internet connection).  From the D-Link website, the description of firmware update 3.12NA looks like it might take care of these problems, but I can't get the router to update.  When I log into the router and check for updates, it returns a message saying the latest update is v. 3.11, dated 9/15/09.  However, when I attempt to download the update, nothing happens.  The D-Link website offers update 3.11NA (4/20/09), 3.12NA (3/8/10), and 3.13NA (9/30/10).  Why does the website offer me a different update than the router itself?  I downloaded 3.13NA and unzipped the folder, which has a text file and a .bin file; I presume the latter is the update.  However, when I browse to this file and attempt to upload it to the router, nothing happens.  How the heck do I update this router?

View 5 Replies View Related

D-Link DIR-655 :: Won't Update Firmware

Jun 5, 2011

My roommates and I keep getting knocked off the internet every few minutes on the router so I've tried a bunch of the tricks found here and am trying to also update the firmware.  I downloaded the newest firmware, uploaded it to the router and it says it succeeded in the update, but then after reboot gives the same version it came with. 

View 1 Replies View Related

D-Link DIR-825 :: DIR-835 Firmware Unable To Update

Aug 5, 2012

I tried to proceed with the update of the firmware on my DIR-835 router.  I want to install version 1.0.2 of the firmware.I tried without success with Chrome and IE9. I get to a blank page and nothing downloads IE9 A PDF file is downloading but not the firmware update itself

View 1 Replies View Related

D-Link DIR-655 :: Won't Accept Firmware Update?

Dec 7, 2012

I am currently on fw 1.33NA and it works fine just want to update so it works better I've tried the reset to factory and unplugged the internet port and ive tried fw 2.0NA and 2.10NA

View 2 Replies View Related

D-Link DIR-655 :: Cannot Update To Rev.B1 Firmware 2.03NABO2

Feb 21, 2012

updating to 2.03NA seems to be working for a lot of people. Anyway, my current NAT type is  Strict ugh. I used to have a DIR-615 router. Man oh man that worked so well. But I had to replace it since it conked out after a 6 year stint.

View 1 Replies View Related

D-Link DAP-1522 :: Can't Update Firmware To 1.31

Dec 7, 2011

I have dap-1522 version A Browser IE8 with lestest updates.

I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.

I try three different way to download it, could the file be bad on dlinks web site?

View 4 Replies View Related

D-Link DIR-825 :: WRT54GL - Can't Update Firmware

Oct 3, 2011

I just bought my DIR-825 from Frys and it came stock with 2.02NA B1 firmware, but everytime I try to update it to 2.03/2.04/2.05/2.06 it errors saying it might not be the same hardware or something on the lines of that. But now when I try to upload it, it just leads me to " was interrupted" and can't even get to the error screen now.I'm not too savvy when it comes to routers, especially a D-Link since previously I had a Linksys WRT54GL

View 15 Replies View Related

D-Link DIR-655 :: Unable To Update Firmware?

Apr 27, 2010

Currently running firmware version 1.32NA on DIR-655 (hardware version A4).  I have made multiple attempts at updating its firmware, first to 1.33NA and later to 1.34 Beta 3, with no success: on each occasion, it accepts the local .bin file upload, then claims to be in the process of applying the upload (with I think an 80 second countdown), and eventually comes back to the login page, still showing that it's running firmware v1.32NA (verified after logon, refresh, etc -- no update was applied).  I have attempted this immediately after a soft reset of the router and even after a hard (power cycle) reset, but still no success.

(Any reason to think that the update might work if performed while the router is disconnected from the Internet? or after a configuration reset?

View 14 Replies View Related

D-Link DIR-825 :: Update Firmware From Web Fails?

Apr 24, 2011

I bought my DIR-825 three months ago. The firmware seem to be from 2009, and the check-for-later-firmware functionality from the web interface tells me that my version (Current Firmware Version :   2.01EU) is the latest.

I don't believe that the firmware from 2009 is the latest, but have no idea on how to proceed.

My hardware in the web interface say this: (Hardware Version: B1     Firmware Version: 2.01E

The problem I really have is related to PPTP pass through (I think), but I thought making sure I have the latest firmware is always a smart move.

So, can the firmware-checker of the web-interface fail, or do I have the latest firmware?

View 6 Replies View Related

D-Link DIR-615 :: Firmware Update Won't Load

Mar 31, 2013

I've been having wireless range issues lately with my dir-615:  a lot of holes seemed to have popped up in my house despite nothing changed (house or router location).  This is after at least 2-3 years of good coverage and no issues.  Went to look at the firmware & found 2.0 installed.  Found out online that (I think) firmware is now at 4.11.  Tried to download and install but both finding the update and unzipping it proved challenging.  Specifically for the latter, unzipping kept yielding more zipped packages, like a russian doll

View 1 Replies View Related

D-Link DCS-930L :: Firmware Update By Mac User?

Sep 2, 2011

The firmware update went smoothly The mydlink service quit accessing the camera,  until I download and ran the updated Mac version of the "mydlink Setup Utility v1.0.06_07272011"Seems as if the camera is more stable; ping times are more consistently low.

View 2 Replies View Related

D-Link DIR-655 :: Can't Configure Router After Firmware Update

May 16, 2013

I updated my dir-655 firmware to 1.36WW after the update I the router has been restored to factory settings and every time I try to change any setting it gives me: "ap should not be locked before configuring". I cant change set any configuration, cant change even the router time!I logged in to the router as admin and left the password blank.

View 2 Replies View Related

D-Link DIR-655 :: Firmware Update Improve Performance?

Jan 22, 2012

I read the sticky related to firmware updates.  I have a DIR-655, that has been been giving me good service for quite a few years.  I subscribe to the "if it ain't broke, don't fix it" philosophy as I have managed to keep my home network and computers running over the years, but I'm not knowledgable in these matters.  I am still running firmware 1.10, and have not wanted to take a chance that if I upgraded I would find myself with numerous devices with no connectivity (running mix of Mac and PC desktops and laptops, XBox, Wii, Roku box, numerous iPhones and iPods, LG TV, and an iPad).

Recently I moved to the cable company phone, and they added a new modem.  They have it set as a gateway (I think that is the terminology), and my network works basically as it did before.  I have noticed though, that my Roku box, laptops, and skype on my Mac desktop seem to be having periods of slower download (Roku box), skype choppiness, and download that stop.  I was thinking that perhaps if I upgraded the firmware, my performance might improve.  After reading the sticky, it seems like firmware may not be the answer.  This is a reliable but older piece of equipment, and now I'm thinking that I just need to upgrade to a newer and perhaps more advanced router.

View 1 Replies View Related

D-Link DIR-655 :: How To Update Firmware And Bring Up All Necessary Tools

Sep 1, 2012

Today i has tryed to update the firmware of my DIR-655 router, but in the screen under the administrative tools menu there is nothing to use.

how do I update the firmware and bring up all the necessary tools?Dir-655 works because they are connected to the internet and manages the wireless network.

View 2 Replies View Related

D-Link DCS-942L :: 942L - Gaps In Continuous Recording

Mar 10, 2012

I have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.

Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: W8961ND Firmware Will Not Update?

Mar 15, 2013

Region : Argentina
Model : TD-W8968
Hardware Version : V1
Region : UnitedKingdom
Firmware Version : 101029
ISP : TalkTalk

I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one

View 3 Replies View Related

D-Link DIR-655 :: No Guest Zone Option / Need Firmware Update?

Jan 19, 2012

Have DIR-655, HW A3, F/W 1.10.  On the Advanced tab, there is no Guest Zone option.  Can this be fixed with a firmware update?  If so, which one?

View 2 Replies View Related

D-Link DCS-930L :: Firmware Update Failed / Timed Out

Jul 1, 2011

I just downloaded and tried to apply the latest Firmware update to my dcs-930l.  It failed or timed out.  Now the camera is unusable.  I tried the hard reset, several times, holding it in for 10 seconds after 3 seconds did not work.  I held it in for 3 seconds, waited 1 minute, and just got a flashing red light.  I did the same thing after holding reset in for 10 seconds.  I have unplugged and replugged in the network cable on both ends several times and turned the power off and on on the router and camera several times.  The camera only blinks with a red flashing light.  Is it a brick now?  Is there any other magic tricks to try? 

View 7 Replies View Related

D-Link DIR-615 :: Firmware Update / Current Or Subsequent Order?

May 1, 2011

I tried to update my firmware on my DIR 615 by clicking the check now button within the routers parameters and got the file DIR615C1_FW311NAB04.bin The update bombed. I have hardware ver. C1 Firmware ver. 3.11NA  dated June 23, 2009.Should I try and install the other firmwares in subsequent order, i.e. ver 3.11NA (dated 7/15/2009), then ver. 3.12 and then ver. 3.13 Or should the latest and greatest cover them all?

dwest.Wireless to router. No factory reset. ISP Ser. Cable ISP Router. Stand Alone.Modem Make & Model. I have to get up for that one, will have to report back tomorrow. 

View 4 Replies View Related

D-Link DIR-655 :: Update Firmware To Use Network Monitor Widget?

Oct 10, 2011

I have a DIR-655 router running 1.21.  The last couple of years, I've always been checking the firmware version by pushing the "Check Now" button on the web management - it has always responded with "This firmware is the latest version. " I've been researching networking monitoring tools and came across this link: [URL] It requires that you update to the latest firmware - and this time I sued on the on-line link - and it turns out that the firmware version for my device is actually 1.35NA?So... first question is - why does my router tell me that 1.21 is the current version?I'd like the network widget - what are pros/cons of updating from 1.21 to 1.35NA?Have there been fixes to the scheduling portion? - 1.21 cannot handle 24-hour time properly.  I also have to reset the router daily - sometimes more often - due to problems when used wirelessly.  (Fortunately I try to use wired as much as I can.)

View 8 Replies View Related

TP-Link ADSL2+ Wireless :: Td-w8968 Needs New Firmware Update

Mar 6, 2013

Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version :

Like many others with the W8968 Modem Router we are experiencing sudden disconnections from the internet every 1/2/3 hours with the only way to cure the problem is to hard reset the modem router. For your tech staff on the phone to say 'I'll just have to do this" is completely unacceptable.I have used 3 other modem routers with the exact same setup flawlessly with no disconnections so it's 110% the modem routers problem.I'm pushing this message for you, TP-Link, to release a new firmware version to fix this problem.

I also believe there are other problems incorporating port forwarding,etc aside from this major flaw.I used to believe TP-Link was a trusted and great company but after my experience I'll be thinking otherwise.

View 10 Replies View Related

TP-Link 300Mbps Wireless :: Update The Firmware WR1043ND?

Feb 14, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :

Do not we deserve, (their customers), at least bothered to tell us?

View 14 Replies View Related

D-Link DCS-930L :: Firmware Update Changed Language To French?

Sep 20, 2011

Received a replacement DCS-930L today; using WPS, did setup wirelessly; all OK. Then did firmware update wirelessly (with second, DCS-932L,  turned OFF). The v1.03 firmware file was the same one I previously used, I think. Amazingly, The camera menus are now in French, and I can't find a setting to change it to English.

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved