RT-N53 5Ghz Radio Gone After Firmware Update
Jan 14, 2013
I have been using the Asus RT-n53 for about a year now and had little to no problems with it. Lately, my wife's iPhone has been dropping its connection to the RT-n53. It was probably a problem with her piece of apple crap, but I thought I would update the firmware on the RT-n53. I found that my firmware was way out of date, so I updated to the latest version.
With the newest firmware installed, I can no longer detect the 5Ghz band with my PlayBook. Before the update, all of the other devices in the house were not 5Ghz capable, so my PlayBook was the only device that used the 5Ghz radio on the RT-n53. Now, the SSID for the 5Ghz band just isn't there any more. In the configuration settings for the RT-n53, everything points to "it should be working"... 5Ghz radio is enabled, SSID broadcast is enabled. I have tried changing the wireless mode from "N Only" to "Auto" to "Legacy". I have fiddled with channel settings, encryption settings, etc. Even tried changing the SSID a few times. Multiple reboot, and still, the 5Ghz SSID just doesn't appear on any devices.
View 3 Replies
ADVERTISEMENT
May 9, 2013
I've just bought an access point AP1141N for my small business but unfortunately there is only Radio 0- 2.4G available through web interface. It is working fine but I would like to have access to radio 1 (5Ghz) as well.
View 2 Replies
View Related
Jul 17, 2012
What Radio Channels are available for selection when operating the EA4500 in Wireless-N (5 GHz) mode only? I need to find a router that can be specifically set on channel 120 in the UK
View 8 Replies
View Related
Jul 16, 2012
We ordered 2 Cisco AIR-LAP1242AG-E-K9 Wireless Access Points with 4 AIR-ANT5135D-R antennas.We accidentally ordered the 5GHz antennas instead of the 2.4GHz antennas.Would it be possible to use the 5GHz antennas as 2.4GHz antennas?If so, are there any down sides to it?
View 15 Replies
View Related
Apr 2, 2012
I have an AP541N-A-K9. For the past couple weeks it stops work at 5:00pm. The clients can see the SSID but when they connect it fails. The only way to get this to work again, is to set the radio to 5GHz 802.11N. Setting the radio to anything else does not allow the clients to connect.
I have some older clients so I need this broadcast G as well.
I have upgrade the software to AP541N-K9-2.0(1). Does not make a difference. Reset to Factory defaulst and reconfig does not make a difference. There are no Rouge AP's in the area.
Between the issues these have passing DHCP from a Windows server and now this, I'm thinking these devices are not fully baked.
View 1 Replies
View Related
Sep 23, 2012
Is it possible to connect directional antenna on slot 1 5Ghz radio on the 1522SB and use it for client access ? As per the deployment guide there is a note that Omni antenna is required on slot1. If i connect directional antenna on slot 1(how will the AP know if its omni or dierctional antenna which is connected anyway) , will it work ?
View 3 Replies
View Related
Dec 30, 2011
I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.
View 2 Replies
View Related
May 21, 2012
I have a P-660HW-T1 v3 its using V3.70(BYD.1) | 02/11/2010.when I try to update it to 3.70(BJZ.10)C0 the update fails to succeed.
View 1 Replies
View Related
Oct 1, 2012
I have REV A and the firmwars version is 1.04. I want to upgrade to ver 1.35. I have downloaded the firmware to my computer. When I login to the router page and go to the firmware tab, when I try to click browse for the file nothing happens. I have tried using Internet Explorer and Firefox.
View 2 Replies
View Related
Nov 12, 2011
I have a DIR-615 router, hardware rev. C1 running firmware v. 3.10, dated 4/17/09. I've been beating my head against the wall trying to get this router to properly forward ports for a bit torrent application, but it not only won't do that, it doesn't want to save DHCP reservations and it doesn't want to recognize my computer on the LAN if I set a static IP address (although it does allow my computer to connect and get an internet connection). From the D-Link website, the description of firmware update 3.12NA looks like it might take care of these problems, but I can't get the router to update. When I log into the router and check for updates, it returns a message saying the latest update is v. 3.11, dated 9/15/09. However, when I attempt to download the update, nothing happens. The D-Link website offers update 3.11NA (4/20/09), 3.12NA (3/8/10), and 3.13NA (9/30/10). Why does the website offer me a different update than the router itself? I downloaded 3.13NA and unzipped the folder, which has a text file and a .bin file; I presume the latter is the update. However, when I browse to this file and attempt to upload it to the router, nothing happens. How the heck do I update this router?
View 5 Replies
View Related
Jun 5, 2011
My roommates and I keep getting knocked off the internet every few minutes on the router so I've tried a bunch of the tricks found here and am trying to also update the firmware. I downloaded the newest firmware, uploaded it to the router and it says it succeeded in the update, but then after reboot gives the same version it came with.
View 1 Replies
View Related
Apr 19, 2011
Here's what we have at the house;
1 - Motorola Modem (horrible ISP)
2 - Dlink DIR 655 wireless router (about 2-3 years old)
3 - 2 laptops (windows 7/both)
4 - DirecTV broadband box (can't remember how that hooked up to the router?)
5 - Playstation 3
6 - (3) DTV sat receivers
The problem started while trying to connect the PS3 to the existing network. Only one laptop is wifi, the other laptop and Ps3 are in my room and wired in to the router, and the strange little DirecTV box is in the wired mix(for on-demand i guess?) The PS3 could not log-in to the PSNetwork(still can't), but it could browse the web just fine. So I start manually typing in IP addresses, 6 IP's in all, including the sharing of 3 DTV boxes that show up on the network on my admin laptop. Didn't work, so I get into the DLink router URL and start opening up ports that PSNetwork uses. At this point I think I have it figured out, then I did a firmware update on the router. My laptop, the PS3(internet, no PSNetwork) and even the little DTV box was working fine, all wired in, using 3 of the four ports. The old lady's laptop in the living room not only couldn't get on-line, it couldn't detect a wifi network? So try to set up a new real quick before I left this AM.. No beans!! I looked at the specs for the router, the firmware is up to date but from early 2010, and the features say "NO" to gaming support..
Do I get another router that can handle all the devices and is PS3 friendly, if that's even a thing!? I can't roll back the firmware update cause I wasn't able to back up the settings, and honestly theres a good chance I did something really bad as far as trying to tweak that router to open up ports for the specific IP address that goes to the game console. We'll call it 191.55.55.99. When I thought I was finished, the PS3 IP address had switched to 191.55.55.98? So it dropped down a number, I thought it was static, and all my efforts were for the --99 IP address, basically I have network issues consisting of Satalite tv boxes, a public DTV share folder, a video game console, one wired and one wireless, and a router that I WANT TO SET ON FIRE!
View 12 Replies
View Related
Dec 8, 2011
I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware
View 4 Replies
View Related
Aug 5, 2012
I tried to proceed with the update of the firmware on my DIR-835 router. I want to install version 1.0.2 of the firmware.I tried without success with Chrome and IE9. I get to a blank page and nothing downloads IE9 A PDF file is downloading but not the firmware update itself
View 1 Replies
View Related
Dec 7, 2012
I am currently on fw 1.33NA and it works fine just want to update so it works better I've tried the reset to factory and unplugged the internet port and ive tried fw 2.0NA and 2.10NA
View 2 Replies
View Related
Feb 21, 2012
updating to 2.03NA seems to be working for a lot of people. Anyway, my current NAT type is Strict ugh. I used to have a DIR-615 router. Man oh man that worked so well. But I had to replace it since it conked out after a 6 year stint.
View 1 Replies
View Related
Dec 7, 2011
I have dap-1522 version A Browser IE8 with lestest updates.
I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.
I try three different way to download it, could the file be bad on dlinks web site?
View 4 Replies
View Related
Oct 3, 2011
I just bought my DIR-825 from Frys and it came stock with 2.02NA B1 firmware, but everytime I try to update it to 2.03/2.04/2.05/2.06 it errors saying it might not be the same hardware or something on the lines of that. But now when I try to upload it, it just leads me to "192.168.0.1 was interrupted" and can't even get to the error screen now.I'm not too savvy when it comes to routers, especially a D-Link since previously I had a Linksys WRT54GL
View 15 Replies
View Related
Apr 27, 2010
Currently running firmware version 1.32NA on DIR-655 (hardware version A4). I have made multiple attempts at updating its firmware, first to 1.33NA and later to 1.34 Beta 3, with no success: on each occasion, it accepts the local .bin file upload, then claims to be in the process of applying the upload (with I think an 80 second countdown), and eventually comes back to the login page, still showing that it's running firmware v1.32NA (verified after logon, refresh, etc -- no update was applied). I have attempted this immediately after a soft reset of the router and even after a hard (power cycle) reset, but still no success.
(Any reason to think that the update might work if performed while the router is disconnected from the Internet? or after a configuration reset?
View 14 Replies
View Related
Apr 24, 2011
I bought my DIR-825 three months ago. The firmware seem to be from 2009, and the check-for-later-firmware functionality from the web interface tells me that my version (Current Firmware Version : 2.01EU) is the latest.
I don't believe that the firmware from 2009 is the latest, but have no idea on how to proceed.
My hardware in the web interface say this: (Hardware Version: B1 Firmware Version: 2.01E
The problem I really have is related to PPTP pass through (I think), but I thought making sure I have the latest firmware is always a smart move.
So, can the firmware-checker of the web-interface fail, or do I have the latest firmware?
View 6 Replies
View Related
Mar 31, 2013
I've been having wireless range issues lately with my dir-615: a lot of holes seemed to have popped up in my house despite nothing changed (house or router location). This is after at least 2-3 years of good coverage and no issues. Went to look at the firmware & found 2.0 installed. Found out online that (I think) firmware is now at 4.11. Tried to download and install but both finding the update and unzipping it proved challenging. Specifically for the latter, unzipping kept yielding more zipped packages, like a russian doll
View 1 Replies
View Related
Oct 19, 2011
I am needing to udate the firmware that I currently have on a 2811 router it currently has c2800nm-adventerprisek9-mz.123-14.T6.bin. I ahve looked through the download area on Cisco's page but the only thing I could find required 128MB flash and this device only has 64MB.
View 2 Replies
View Related
Apr 23, 2011
so I've recently reinstalled my OS (windows 7 32bit) because I got a BSOD for some uknown reason and it kept booting to NTFS file checker, anyway this is irrelevant.since the reinstall, ive been getting pretty annoying latency spikes. The only game I've got installed ATM is counterstrike: source so no I haven't tried out any other games.My connection consists of a netgear wireless G router routing a 10mb virgin media connection to my belkin wireless G USB adapter.my drivers are all up to date, including the adapter. I cannot update my firmware because the netgear router is owned by VM and they don't allow firmware updates from netgear (I've tried and failed to update) for some unknown reason.
In games, sometimes it runs smoothly, and other times I get really bad latency spikes. It will all be running fine at about 30ping but then it will lag and shoot up to 300/350. it will then keep doing this intermittently, rendering the online game unplayable as I'm being owned by AWPers everywhere. It's definitely me as other people in the server also on VM are experiencing no lag. On top of this, I sometimes find my browser will run extremely slow on occasions, as well as downloads becoming slow on some occasions.
View 11 Replies
View Related
Sep 2, 2012
I get this error when I update to 1.12. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
View 3 Replies
View Related
Feb 17, 2011
I have a WAG54G ver 1.2, 4-port eth + wireless adsl router. The latest firmware update on the support download site is Ver.1.02.1 from 05/18/2004 which is ridiculous! [URL] This is the ver I have installed on the router and lt does not even have WDS setting, so the device is more or less useless.I have checked open-source alternatives (the wrt line) but they all start with WAG54G V2 and none support the earlier models v1 and v1.2 I need to somehow upgrade this router to something functional. I have checked the GPL code page as well and while there ls a listing for WAG54g, I think itd for V3 routers. So the question is:
1. Is GPL source code usable on v1.2 (I assume not)
2. any suggestions to get a wds system on the router (including beta / alpha firmware)
View 4 Replies
View Related
Sep 2, 2011
The firmware update went smoothly The mydlink service quit accessing the camera, until I download and ran the updated Mac version of the "mydlink Setup Utility v1.0.06_07272011"Seems as if the camera is more stable; ping times are more consistently low.
View 2 Replies
View Related
Apr 19, 2013
i trried te update the firmware of my WAG160N. I had to choose between two versions. I tried both. But both versions give the message that is the wrong version and the installations stops.
View 9 Replies
View Related
May 16, 2013
I updated my dir-655 firmware to 1.36WW after the update I the router has been restored to factory settings and every time I try to change any setting it gives me: "ap should not be locked before configuring". I cant change set any configuration, cant change even the router time!I logged in to the router as admin and left the password blank.
View 2 Replies
View Related
Mar 27, 2013
it wants me to download something for a bin file, is it safe?
View 1 Replies
View Related
Mar 10, 2007
how to update the firmware for WAG200G? I've downloaded the firmware from internet, but i don't know what to do next...
View 3 Replies
View Related
Jan 1, 2013
I was going to update my firmware and the update for F5D8236-2 says it is version 2.01.03. At looking in my router it currently has version 2.01.06 (Jul 2 2009 22:24:38)Which should I be using?
View 1 Replies
View Related
Jan 22, 2012
I read the sticky related to firmware updates. I have a DIR-655, that has been been giving me good service for quite a few years. I subscribe to the "if it ain't broke, don't fix it" philosophy as I have managed to keep my home network and computers running over the years, but I'm not knowledgable in these matters. I am still running firmware 1.10, and have not wanted to take a chance that if I upgraded I would find myself with numerous devices with no connectivity (running mix of Mac and PC desktops and laptops, XBox, Wii, Roku box, numerous iPhones and iPods, LG TV, and an iPad).
Recently I moved to the cable company phone, and they added a new modem. They have it set as a gateway (I think that is the terminology), and my network works basically as it did before. I have noticed though, that my Roku box, laptops, and skype on my Mac desktop seem to be having periods of slower download (Roku box), skype choppiness, and download that stop. I was thinking that perhaps if I upgraded the firmware, my performance might improve. After reading the sticky, it seems like firmware may not be the answer. This is a reliable but older piece of equipment, and now I'm thinking that I just need to upgrade to a newer and perhaps more advanced router.
View 1 Replies
View Related
Feb 15, 2013
I am using DIR 615 Hardware Version JX... When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site. I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page. Which doesn't even list Rev Jx as an option.I am having a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]
View 1 Replies
View Related
