I have one Dell Optiplex 390 (windows 7 64 bit), which is having one PCI slot and 3 PCIe slots.The built in NIC cards doesn't support network teaming. I require 2 team in my system. Do you know any PCIe card with network teaming facility?
View 1 RepliesI have an Intel celeron D, optiplex 320, xp. I just bought a wireless usb router and it shows full strength bars but says there is little or no connection. could that be the computer or my mobile connection? I can access internet on my phone though. I am having trouble getting connection to my computer. it was given to me by a friend so I don't know much about it but it is a 250 or 260 bit I think, around that? I have made sure the wifi was on.
View 7 Replies View RelatedHow do I get my Dell Optiplex 380 to connect to my wireless network. I get the message that no network is found and to connect my ethernet cable.
View 1 Replies View RelatedI was told that my network adapter was inproperlly installed.Windows could not detect any wired,or wirerless network card installed on computer
View 2 Replies View RelatedI'm on a large network in my office and we recieved new computers(dell optiplex 390) I'm trying to access a mysqlexpress database on my machine from another one and I'm not able to even access the computer using \MYCOMPUTER method with the same user/pass as my machine on the one I'm trying to connect from. But still no one in my office can reach my computer.
My av is OfficeScan.
I've tried:
+ Disabling the firewall(windows no other firewall in place).
+ Checking network settings
+ enabling sharing settings
+ allowing anonymous connections via the regestry value
+ yelling at the machine.
+ adding users to the Aministrators group.
Very soon for the second time we will be replacing systems in our (grad school) student computer Lab from the time of its opening in January, 1998. The monitors are recessed down below glass desk surfaces and are 17-inch CRT (Dell).Our current (medium) computers are SFF GX-150 and have 512MB RAM (doubled from the original 256) and 80 GB hard drives. The new GX620 will have 2GB RAM, 160MB hard drive.In addition, our current 10/100 Ethernet LAN for this part of the campus is also supposed to be upgraded to Gigabit (switch). Any experience of using Gigabit in an organization's local area network to find out any concerns for which I should be alert as we begin this new phase. Incoming students arrive before middle of August so the switch-out needs to be done fairly quickly and smoothly. What concerns should I have?
View 3 Replies View Relatedhow to configure LAN teaming in Cisco ACS 1121. My requirement is to have virtual IP in the server with two physical IPs in the available 2 interface in the server.
View 1 Replies View RelatedI have a server windows 2008 that I would like to have a nic teaming configuration, the server has two nics, each nic is connected to a different switch. One is connected to cisco 2960 and the other is connected to cisco 2950. I have read here in forums about nic teaming but using the same switch. I have not found using different switch. Is this possible?
View 1 Replies View RelatedDoes the new UCS hardware change anything ?Can we bundle 2 NICs somehow to get interface redundancy ?If still not possible to configure that in ACS 5 itself:Can it enentually be done on the "hardware" level within the appliance firmware (UCS BIOS) ?(RHEL would provide NIC bonding,,, unfortunately its not accessable from ACS5 CLI)
View 6 Replies View RelatedI have windows servers connected on cisco switch 4500 series. Issue is when server NIC configure with Teaming, some times servers gets not reachable, and after restarting the servers it gets reachable. Is 4500 series switch support the teaming software?
View 3 Replies View RelatedWe have a Power Edge T310, sporting two Broadcom 5716C LOM's. We also have a Power Connect 5524 switch. Good opportunity to team the two network connections using 'Link Aggregation (802.3ad)'. Downloaded the most recent management software off the Broad com site. Installed BACS 3 on the Power Edge, running Windows SBS 2011, which has Windows Server 2008 r2 x64 as it's base.
Started BACS and tried to configure teaming. But there's no teaming-section in BACS. I removed, restarted the server and re-installed the Broad com software, but still no teaming section? How do I solve this?
I am working with a strange problem at the minute with HP's NIC Teaming with Transmision Load Balancing.We have a HP blade system the Server is connected to 2 cisco 3020's and then those 2 switches are connected to a 3750 Stack consisting of 2 Members.
Theres an LACP ether channel consisting of 4 Gigabit Ethernet Ports to each 3020 from the 3750 Stack.They both have exactly the same configuration and all ports are up and the channel looks healthy.
When setting the Preference order on the server if I set the NIC connected to the 1st Cisco 3020 as primary i.e. Tx/Rx then everything is fine.If I set the NIC Connected to the 2nd Cisco 3020 as primary then all seems fine i.e. I can ping it, it can access services outside its own vlan and the internet. It cannot however ping anything connected to the same subnet and VLAN on the 3750 Stack.
Doing a packet capture on a server connected to the VLAN on the 3750 stack I can see the Echo Requests coming in and the server sending an echo Reply but the echo reply never gets back to the server with the teamed NICs.
I did a Layer 2 traceroute and all looked fine, all the MAC Tables were good.I thought maybe it was a layer 2 loop causing the problems but I have checked and re-checked STP and can't find any problems. STP has picked up one intentional loop and blocked it.
I've raised a ticket with HP to see if they can point me in the right direction but I don't think it is a problem with there Drivers. It definately seems like a networking problem.
Having a design where an IBM bladecenter has two Nexus 4001i switches and each switch is connected to a Nexus 5k vPC pair, is it possible to configure active-active nic teaming on the hosts (blades) considering that the Nexus 4k switches are unaware of each other and blade has one connection to each 4k over either emulex or qlogic 10G CNA?
View 1 Replies View RelatedNeed clarification on the VPC with 5k and 2248 Fabric Extenders. My question is can each fabric extender uplink to two different 5ks, and at the same time, have servers connected to two both fabric extenders with a VPC.So basically, the server NIC will team with two different fabric extenders, and each fabric extender will connect to two different 5k's.
View 3 Replies View RelatedI just bought this computer and was wondering if i could get wifi on it or if i needed to buy a wirless adapter?
View 3 Replies View RelatedWhat wireless card should i buy for Dell Optiplex 745?
View 2 Replies View RelatedI did a clean install of Windows 7 32-bit on a Dell Optiplex 980. I don't know what driver is for the ethernet controller. Will you tell me? I just downloaded the INTEL_825XX-GIGABIT-PLATFORM_A06_R290983.exe (5MB). I don't know if this is it. I will try on Monday. Should I update the chipset driver too? What is the driver for that. I downloaded Intel_AMT-HECI_A05_R304259.exe (10MB). Is that right for the chipset?
View 2 Replies View RelatedAm looking into using stacking and NIC teaming to create redunancy for user access to servers. What I am thinking is getting 2 SG500-28 switchs and configuring them in a stack that appears as one logical switch. Now on the servers I would configure 2 NICs to be a team so they appear as 1 logical interface, perferably in an active/active configuration using LACP. In this NIC team take 1 team member to switch A and the other to switch B, so each team member is on seperate switches.
Givent the scenario:
1) Will that work with the 500 series switchs? Reason for the switches is their price point is perfect for my client.
2) Besides the stack link will there also need to be a LAG between the switches or does the stack link do data traffic also?
just formated my computer and can not find ethernet drivers
View 1 Replies View RelatedI have a Dell Optiplex 780 running Windows XP and a wireless router model 7500 from Verizon. I recently bought this desktop and want to use my old one so the kids can play games on it. However I can't connect to the internet with the old system. I tried running a USB cable from the wireless modem to the old system to no avail. I tried hooking up a wireless-G Broadband router by Linksys to the wireless router and that didn't work. Does there have to be some wifi hardware/software on these desktops? [code]
View 2 Replies View Relatedhow to down load dell optiplex 380 lan driver
View 3 Replies View RelatedEthernet controller for dell optiplex gx520?
View 1 Replies View Relatedi want the dell optiplex 380 Ethernet driver software.
View 4 Replies View RelatedIm unable to get my router working as my machine has no ethernet controllers installer.I have a dell, optiplex gx260. The lan in enabled in the Bios. I have searched and tried a number of driver None of which have worked, I have tried the 3com 3c905c txm, intel gigabit LOM, and im about to try the Intel 8254x1000 intregrated netwk driver (which i dont think'll work as its the same as the Lom one). if that doesnt work is it best to reinstall the chipset drivers?
View 6 Replies View RelatedRecently I got a brand new E1200 to replace Apple Extreme Base station for my home wireless network. The router deployed just fine except one weird problem. While all devices (desktops, laptops, cell phones, iPad) can access the router, one desktop (Dell Optiplex DX280) cannot see the router at all. The router network, even with default SSID, does not even show in the wireless network list, no matter how many times the list is refreshed. The wireless adapter (Dell TrueMobile 1300 USB2.0) is fine, since it picks up the router SSID when connected to another desktop. The stubborn desktop works just fine with previous Apple router and can see many networks around, like neighbors' networks. Thinking that some other previously installed software interferes with seeing the router SSID, I completely wiped and reformatted HD and reinstalled fresh copy of WinXP - still the same result, the desktop works just fine with the Apple router, but still cannot see E1200 SSID. The router was reset to factory defaults and all access restrictions were removed. While all the devices see the default SSID and can conncet to the router with no problems, the stubborn desktop keep completely ignoring it.
Again, every single component - desktop (Optiplex DX280), wireless USB adapter (TrueMobile 1800 USB2.0), routers (both Apple and Cisco) are functioning normally otherwise. It is the combination of Optiplex GX280 - TrueMobile 1300 - Cisco E1200 that does not work.
Ethernet controller driver for xp dell optiplex 745 desktop?
View 2 Replies View RelatedI need network driver for dill optiplex 380 & servic tag no - 36R08R1
View 1 Replies View Relatedi have windows server 2008 on a dell optiplex gx280 CPU and the ethernet port is not recognized. there for i cant update the driver from that computer is there somewhere that i can download an update for it on another computer?
View 2 Replies View RelatedEthernet controller driver dell optiplex 380 windows 7
View 1 Replies View Relatedi want to download drivers for dell optiplex 380n ( win xp )
View 1 Replies View RelatedI installed a fresh Windows XP Pro on my Optiplex gx270 last week. Everything was fine but now I cannot get an internet connection. I followed all the steps on the dell support web site for the windows reinstall, putting all the drivers on in the correct order, all from my original resource CD. Then downloaded the new recommended driver for my service tag from the dell site, and still no ethernet controller driver is found (a yellow question mark with an exclamation mark on top in windows device manager). Tried a couple of times with the dell online chat, but was disconnected right away. Then spent another 1+ hour on the phone with dell tech support this morning. After uninstalling and reinstalling the same drivers I had previously installed, they apparently had no other suggestions and disconnected me. So I'm left with what was a pretty decent machine that is incapable of connecting to the internet.
View 9 Replies View RelatedWhere I can find the MAC address on a Optiplex desktop GX620? Its not in the BIOS.
View 1 Replies View Relatedmy Ethernet driver is not installed on my computer and i am trying to find driver for it so i can use the internet
i have loked at driver on dell website but am unsure what to download i am running XP
proffesional operrating system... i am using another computer to post this question..many of my other device drivers are not installed like display etc