Cisco :: LMS 3.2.1 - Cannot Backup Running Configurations In RME 4.3.2

Jan 18, 2013

Platform: LMS 3.2.1 with RME 4.3.2 on Windows 2003.I'm having a problem with several devices that were backing up fine until this week - suddenly they aren't backing up their running configurations, but RME is fetching their startup configurations fine and VTP backups are fine. At first I thought it might be timeouts, so I used inline edit to incease the telnet timeout for a device to 180s. However, the job fails well within this time period (debug shows on i/o error?). My order of protocols is SSH, Telnet, TFTP. I took a stab in the dark that this suggested a database problem so I picked one at random and deleted it from DCR, and readded it and it worked. However, for the other 48 devices affected it did not.
 
I'm wondering if I need to do anything to the RME database to get things back to where they were? Do I need to reinitialize the RME database, and if I do that what do I lose? [code]

View 2 Replies


ADVERTISEMENT

Make A Backup Of Roles And Their Configurations?

Jun 1, 2011

I have a Domain Controller on windows 2003 advanced server. and I have roles and some configuration such as rights, user accounts, DHCP configuration, DNS server and etc on it.Some times windows needs to be reinstalled but after reinstalling,configuration of roles would be lost. I don't know how can I backup these settings? Is there any solution about this problem.I know a simple way is creating an image of windows installation drive by an application such as Norton Ghost but I'm talking about windows solution.

View 3 Replies View Related

Good Product To Use To Backup Device Configurations?

Apr 5, 2012

What's a good product to use to backup device configurations?

View 19 Replies View Related

Cisco :: Restore 5.2.148.0 Backup File On Different Server Running WCS?

Feb 10, 2011

If the hostnames are the same - can I restore the backup file from a wcs 5.2.148.0 instance on a different wcs instance running wcs 6.0.196.0?

View 1 Replies View Related

Cisco :: How To Make Simple Backup / Restore Running Config Jobs On LMS 4.1

Oct 20, 2011

have some problems with setting up jobs for the backup running config on my switches. Have RW and RO contact with everyone and can change the config in editor, but do not get config.txt

View 1 Replies View Related

Cisco WAN :: Running All Switches Running By Default Configuration And Connected To WS-C4506

Jun 11, 2013

I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.

View 9 Replies View Related

Cisco Firewall :: Configuration Migration From ASA 5540 Running 7.2 To 5525X Running 9.1

May 7, 2013

I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?

View 3 Replies View Related

Cisco :: LMS 4.1 Not Archiving Configurations?

Aug 12, 2012

My devices configurations are not getting backed up.       

View 1 Replies View Related

What Are The Configurations Of A UTP Cable

Mar 2, 2011

how to connect UTP cable

View 1 Replies View Related

Cisco :: Getting Support On AIR-AP1142N-E-K9 Configurations?

Oct 14, 2012

I would like to have a support on AIR-AP1142N-E-K9 configurations.How I can config this AP?

View 1 Replies View Related

Cisco WAN :: Erasing Configurations On 7200 VXR?

Sep 27, 2011

I was recently given a Cisco 7200 VXR and told to erase the stored configurations in it. how to do erasing of Cisco 7200 stored config else I might have to delete them line by line.

View 4 Replies View Related

Cisco :: LMS 4.2 / How To Save Devices Configurations

Jun 11, 2012

I like to know how I can save or export all of my devices configurations to an FTP server for example.Cisco Prime LMS 4.2 appliance.

View 4 Replies View Related

Cisco :: What Module Is Used To Push Configurations In LMS 3.2.1

May 20, 2012

What module is used to push configurations in LMS 3.2.1?                   

View 1 Replies View Related

Cisco WAN :: Multicasting Configurations On 3560 SW

Aug 22, 2011

Here is my basic network layout for multicasting for Syn-apps

Multicast Source-->3750 SW (add PIM SM-DM? Yes/No)-->3845 WAN Router (add PIM SM-DM? Yes/No)-->T1-->2821 (add PIM SM-DM? Yes/No)-->3560 SW (add PIM SM-DM? Yes/No)
 
OK, in this is it necessary to configure "IP Multicast-routing" on the switches? Do I configure PIM on all interfaces that will handle multicasting (router and switches?) If PIM is enabled on the 3750 do I need PIM configured between the 3845 and the 2821 ? Do I configure the Auto-RP on the 3750 or the 3845 ?

View 3 Replies View Related

Cisco :: DCMA0011 - No Configurations Archived For The Device(s)

Dec 18, 2012

i have few devices in Cisco works, when i try to view their configuration. i get this error.DCMA0011: No configurations archived for the device(s). The selected device(s) should have at least one archived version.

View 1 Replies View Related

Cisco Firewall :: ASA 8.4 - Failover Not Replicating Configurations

Jun 5, 2011

I have this firewall working as active/standby. Everything seemed to be ok, but we noticed that confirgurations are not being replicated by saving configuration either copy run start or write. The workaround here is write standby command. Below the configs and stats, plus the show version, which is the same in both equipments:

Header 1                             
failover
failover lan unit primary

[Code].....

View 9 Replies View Related

Cisco :: Prime LMS 4.2.1 Archived Configurations Disappear

Sep 13, 2012

We upgraded to Cisco LMS 4.2.1 recently and we have noticed that every time we reboot our Windows VM Server the archived configurations from the network devices are no longer displayed. They do not appear in the archive, version tree or directory. We are meeting the minimum system requirements for running LMS 4.2.1 and we do not seem to have found any possible bugs related to this.

View 8 Replies View Related

Cisco WAN :: 2651XM ADSL - No Access To Configurations

Feb 21, 2012

We have a number of 2651XM with WIC-1ADSL.  These are supplied by another company and we do not have access to the configs.We are told that the maximum througput from the ADSL WIC to the FastEthernet 0/1 is 2.5Mbps ( "it's a backplane issue" ), even though the ADSL speed reported by the router on the external interface is 8MbpsT

View 3 Replies View Related

Cisco Routers :: How To Edit RV180W Configurations

Dec 9, 2012

We are deploying over 20 RV180W Routers for a client and need to find a faster way to configure them for shipping.We have created a base image (all settings that will be shared between the 20 locations), we need an easy and quick way to make IP changes for the 3 VLANs and Local Security Groups for the IPSEC VPN.I tried to edit the CFG file by hand, but the checksum fails when it is loaded into the RV180W.How can I accomplish this? Can I manually create the checksum?Can I remove the checksum? 

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Without IPS Can't Remove Some IPS Configurations

Dec 5, 2012

I have an ASA 5505 without any IPS module.While copy/pasting some configurations from another 5510 with IPS I copied my mistake the some of the IPS configurations part. Now I can't remove it.When ASA starts I get this Warning:
  
...WARNING> IPS policy is configured without an SSM card.
*** Output from config line 828, "  ips inline fail open"
 
Those lines are:
 
policy-map Outside_Policy
class IPS_class
ips inline fail-open
 
 When I try to do "no ips inline fail-open" I get an "invalid input detected".If I try a no class IPS_class I get that is being in use.What can I do to clean up those lines?

View 8 Replies View Related

Cisco :: Works LMS 4.0 For Collecting Configurations Of Devices

Jul 16, 2012

I am using Cisco Works LMS 4.0 for collecting configurations of the devices. After changing the configuration of the device what is the minimum time that LMS detects the configuration was changed and save (make archive) the new configuration in the LMS database ? (Periodic Collection and Polling are disabled). Which mechanism drive this process, SNMP Trap?

View 4 Replies View Related

Cisco Firewall :: Move Some Configurations Over To ASA5510?

Apr 18, 2013

I'm trying to move some configurations over to an ASA5510 and some of the commands are a bit different than I'm used to (worked on old pix before)
 
I've configured the following on the device:
Outside interface:  65.66.64.34/28
DMZ                  :  65.66.64.49/28
Inside                :  10.2.3.3/26
===========================

The current firewall has the below configured on it (old Juniper)
 
10.2.3.0/24                       gateway 10.2.3.15               **10.2.3.15 is the IP for 3750 switch on the inside LAN**
10.0.0.0/24                       gateway 10.2.3.4                 **10.12.175.4 internal vpn- will remove later but thats a different discussion**
0 0                                    gateway  65.66.64.33            **to internet
10.0.1.0                            gateway 10.2.3.2                 **10.2.3.2 represents mpls traffic

[code]...
 
The current set up for this network has an mpls router and a vpn concentrator as part of the network my aim currently is to replace the juniper with an asa5510 the changing of the vpn tunnels will be for a different time:

work station ===>  switch (3750) DG to =====> MPLS (vendor owned and managed) ====> non mpls traffic ====> vpn concentrator ===>firewall ===> router
 
The above will need acls to go with the routes, which I should manage ok just want to make sure the routing is configured properly

View 2 Replies View Related

Cisco Firewall :: LMS 4.0 Cannot See ASA 5520 / 5510 Configurations

Sep 30, 2012

I have an issue with the LMS 4.0, i added manually the ASA Fws 5520 and 5510, and i see them there, but i cannot see the configuration, inventory and technology details.Telnet is deactivaved in ASA´s, ssh and snmp v3 are enabled.Routers and switches were added without issues.

View 3 Replies View Related

Siemens Giga Set SE567 - How To Set Up Configurations

Sep 9, 2011

My friend recently let me have his Seimens Gigaset SE567 modem which i needed cause it has a router but as soon as i switched it with my old router which is a Westell 6100f,the internet light wont show up ..so i contacted verizon and they said that there service is plug and play type of service so i am lost on what to do ..i looked around the forums and i got close by going to the browser and typing the IP but from there i am stuck ..i don't know how to set up any thing in the configurations.

View 2 Replies View Related

Hooking Multiple Routers Together - Configurations?

Feb 27, 2012

setting two network, I try but the other other network is so slow and a lot of time will not connect to the net

View 1 Replies View Related

Cisco Switching/Routing :: 3750 Configurations For NAT On A Stick

Jul 10, 2012

Has anyone implemented a working Nat on a Stick?I am looking for 3750 configurations for Nat on a stick.Our users need to access the camera monitoring from home as well as in work.We will like to setup the monitoring software with public address (and port) of the cameras, as the users use the same configuration at home and work.DNS will not work for us as the monitoring settings only accept IP.

View 4 Replies View Related

Cisco Switching/Routing :: 6509 Getting Mismatched VSS Configurations

Sep 25, 2011

I built a VSS pair with a couple of 6509's.  This was our first pair so we took the opportunity to do some testing.  One of the features we tested was the priority/preemption feature, which we decided not to use.  After some time we shutdown switch 1 and relocated it to another building.  Unfortunately, because of a lack of fiber, it was not connected to switch 2 for several months.  Also, unfortunately, I failed to remove the priority commands.  Now while switch 1 was "unconnected", we made changes to the config on switch 2.  Months later, when the fiber was complete and I connected switch 1, preemption caused it to take over.  I'm guessing switch 1 thought it's config file was the better one, and proceeded to overwrite switch 2's production config.  I quickly disconnected the fiber but not before losing my production config on switch 2.  We of course recovered from that with a backup, but now I need to connect switch 1 again.  I have removed the priority command from switch 1 and rebooted it.

View 7 Replies View Related

Cisco :: Access Point Air Lap1242 Not Save Configurations

Nov 18, 2011

I have 2 Air-Lap1242 that wont save their config after reboot. They are managed by a WLC (4404) and it all seems pretty fine and dandy, but when i reboot them, they dont want to save anything.I am setting them up as bridges (mesh), and it works until i reboot them, then I have to do it all over again.Using CLI to type in "write mem" or "copy running-config startup-config" only results in.

View 1 Replies View Related

Cisco Firewall :: ASA 5520 ACL Established Connections Configurations

Jan 16, 2012

I have one ASA5520 with version 8.4(3), and a few ACL rules defined. One ACL is permit traffic from one interface(EXT_SERVICE) to another interface(DMZ_SERVICE), if i change that rule to deny traffic, all new connections that match the rule is denied, but no the established connectios. ¿Why the established connections can pass the deny rule? ¿How I can change that? I need create a ACL with deny type and stop all comunications that is running and match the deny rule.

Running-config of my ASA5520:

ciscoasa# show run
: Saved
:
ASA Version 8.4(3)
!
hostname ciscoasa
enable password 8ay2wjIyt7RRXU24 encrypted passwd 2wFQnbNIdI.2KYtU encrypted names !
interface GigabitEthernet0/0
[Code] ........

View 9 Replies View Related

Cisco WAN :: 1841 / Port Forwarding Configurations Do Not Working

Oct 17, 2012

I have issues with port forwarding. I did, but it didn't work. Then I tried different ip addresses. Now I don't know how to delete those configurations, because when I try to overwrite it says already exist. And still port forwarding is not working. I did: ip nat inside source static tcp (ip and port numbers)Our device is 1841, also we have firewall within this router. DHCP is in our 3750.

View 9 Replies View Related

Cisco Wireless :: CT2504 And Aironet 1142N Configurations?

Jan 8, 2013

I have bought 2504 LAN Controller and my old 1142 wants to configure to accept that Controller instead of old controller. These APs and controllers in far away site and before I go there I want to figure out how can I do following.
 
1.   How can I configure old 1142(Previously connected with another LAN Controller) to accept New 2504 Controller instead of old controller ?

2.  What are the concerns do I need to consider?

View 19 Replies View Related

Cisco :: LMS Prime 4.1 Store Device Configurations External?

Apr 9, 2013

We use Cisco LMS Prime 4.1 to archive our Cisco Equipment configurations.
 
Now we want to store the configurations off site.

View 2 Replies View Related

Cisco WAN :: 2621 - Sample Configurations / Routing Network

Apr 9, 2011

I'm moving into a new data center. I don't consider myself a network engineer or anything but I do understand the basics. The new data center I am moving into routes my network to me a bit differently than my old data center. The IOS on the Cisco 2621 is: c2600-i-mz.123-26.bin
 
I am assigned a /29 block which they configure as the routing network, it looks like this: Routing Network: A.A.A.0Routing Network Sub net Mask: 255.255.255.248Routing Network Def Gateway: A.A.A.1Customer Usable Address: A.A.A.4
 
I've been assigned a /28 block which is B.B.B.240/28. They stated that in order for me to use my allocated blocks, I had to act as my own gateway, routing the traffic through the routing network. This goes just a bit beyond my networking knowledge, though I still understand it, I just don't know exactly how to execute. I'm assuming my 2621 with 2 Fast Ethernet interfaces should be able to handle this routing scenario.
 
Any sample configs, or possible a link to a how to to get this setup? I was going to use FreeBSD to do the routing, but a appliance based Cisco router is much more attractive of an option to me.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved