Cisco :: Restore 5.2.148.0 Backup File On Different Server Running WCS?

Feb 10, 2011

If the hostnames are the same - can I restore the backup file from a wcs 5.2.148.0 instance on a different wcs instance running wcs 6.0.196.0?

View 1 Replies


ADVERTISEMENT

Cisco :: How To Make Simple Backup / Restore Running Config Jobs On LMS 4.1

Oct 20, 2011

have some problems with setting up jobs for the backup running config on my switches. Have RW and RO contact with everyone and can change the config in editor, but do not get config.txt

View 1 Replies View Related

Cisco :: How To Restore ACS Config From An Existing Backup File In ACS Cluster Deployment

May 21, 2012

How can we restore ACS config from an existing backup file, in an ACS cluster deployment? is it through CLI? with"restore"or"acs restore" command? and should I restore only the ACS config or both ACS and ADE-OS config?

View 4 Replies View Related

Cisco :: LMS 4.0 Server Backup / Restore

Mar 9, 2012

We want to take the current configuration backup of the LMS 4.0 (Installed on Win 2003 Enterprise) and restore the same to a new windows machine (Win2003 standard edition).

View 1 Replies View Related

Linksys Wired Router :: RV042 - Convert EXP To Config File To Restore Backup Into New Router

Jun 7, 2011

I have a problem with the router Linksys RV042, I made a backup of it that contains a file with the extention .exp Now we have buy a new Rv042 made by cisco and the backup file is .config the question is how I convert the .exp file to a .config file so I can Restore the backup in to the new router?

View 1 Replies View Related

Backup / Sync Between File Server?

Mar 21, 2013

I have a Nas4Free (FreeBSD) server on location A and another Nas4Free server on location B.

I need to regulary access to location B's some folder from Windows machine at location A. What is the best scenario for this?

I think to rsync those folders/files every night to location A, but then I think what if in the future there are many other locations (C, D, E, F) that need to be rsynced to location A, that will make location A need a very large harddisk space that maybe not available in the market or limit
by the hardware/BIOS support.

View 2 Replies View Related

Cisco :: Backup And Restore LMS 3.1?

Apr 11, 2012

We have cisco works LMS 3.1  and the server have very problems, we need format the server and reinstall the Cisco Works, when I doin backup and restore of data LMS We lost the licenses? or when we restore the data in the server we have the same licenses? or get the new licenses to cisco?

View 5 Replies View Related

Cisco :: WCS 7.0.220.0 Backup Restore Failed

Aug 21, 2012

I am facing a failed issue when restoring the WCS Database. Below is the error i get, does any one out there facing it before?
  
#######################################
[root@egwgwcs WCS7.0.220.0]# ./Restore
Please enter the full path of the backup file name: /opt/WCS7.0.220.0/Backup_File/WCS_Aug2012.nmsbackup
Untaring the backup file...
Failed to untar backup file. Exception: invalid stored block lengths
Restore database failed.
#######################################

View 1 Replies View Related

Cisco WAN :: Restore Backup From C2960 To Other One?

Jan 8, 2012

I want to restore a backup from c2960 to other one.Why is recommended to remove any security commands, like AAA?

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Backup Restore?

Oct 20, 2011

I've been setting up building and testing our new ACS 5.x boxes and I've been running into a spot of bother with the backup restore feature. This most likely due to my unfamiliarity with the tool.

As part of my testing for Backup/Restore, I first backup the data using the Removal and backup  tool in Secure ACS View (found under data management. I then confirm that the new FULL backup has been populated my test repository and is available in the restore feature. (also under Data Management) My next step is to create a few test Network Device Groups, Identity groups, and users  Then I go back to the restore feature select the Back up file I just created, I also check the box Skip View Database backup before Restore and hit the restore button.
 
The box goes through the expected steps including a reload. When it comes back up I would expect the test users, groups etc I created after the last backup to be gone as they did not exist at that time. Although I find the opposite is true. Any settings I made after the last backup are still present. I do not have incremental backups enabled.
  
I essentially want to test a backup of the database of users and groups/rules etc make changes and then restore that database to the previous backed up configuration.

View 2 Replies View Related

Cisco VPN :: ASA 5505 - Backup Restore Certificates

Oct 10, 2011

I have a Cisco ASA 5505 as a BOVPN endpoint using certificates. The config is complete and I now need to back it up and restore to a cold standby Cisco ASA 5505 that will sit on the shelf until something goes wrong.
 
 Problem is I cannot restore my certifcates to the standby.
 
I have tried the backup and restore wizard in ASDM and to be honest it didn't work.

View 2 Replies View Related

Cisco :: 5508 - NCS Configuration Backup And Restore Of WLC

Jan 10, 2012

I recently tested the process for a customer of defaulting a Cisco WLC to factory configuration and then restoring the configuration from Cisco NCS.  It was not seamless to say the least and I wonder if I have just gone about it the wrong way. 
 
Have have set the NCS platform to configuration sync with the 5508 controllers at 04:00 every day and prior to the controller defaulting I ensured that NCS also reported that the config was in sync. I have also set NCS to complete a tftp backup of the controller every night 23:00 - interestingly though I have no idea where this is stored on the NCS platform ( a VM appliance ) or what it's file name is.
 
Anyway my experiences where as follows:-
1.  defaulted WLC and via serial CLI ended up at the configuration wizard.
2.  Set the correct LAG, management IP, host name that NCS knew this controller by.
3.  To test things just created a dummy WLAN ( SSID ) as I assumed this would be overwritten ( big mistake ! ). 
 
At this point I connected the controller to the network and tried to restore the configuration from the config sync version.

First problem - you have to remember to set up the SNMP community string you were using as it is needed by the configuration sync process.  After adding this to the controller I could push the configuration to the controller.

Second problem - failed to add the first WLAN from the backup as I have added the temporary dummy W LAN via the wizard and NCS reported a conflict.  So had to delete WLAN ID 1 from the WLC GUI directly and then the config push no longer reported this error.

Third problem - for some reason did not add the TACACS server details - reported the error that it could not added them.  I manually added these via a template via NCS and all was well. 

Fourth problem - all but the first WLAN was in the disabled state - had to re-enable all of the WLANs. 

Fifth problem - any default items I had disabled or removed have not been saved - therefore I have removed the public and private SNMP communities - but these were still on the WLC after the restore.  I have disabled unused ports not in the LAG as they show an error in NCS - these where not disabled after the restore.
 
So all in all not a very satisfactory restore process from NCS to an defaulted WLC ( meant to simulate to the customer what would be needed if they had to replace a controller due to hardware failure ).

View 1 Replies View Related

Cisco :: Backup And Restore Quarantines Ironport C170

Dec 20, 2011

Is there anyway to backup and restore the spams quarantine to another ironport c170?

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N Cannot Restore Configuration Backup

Mar 27, 2010

I have a WAG160N and its seems to have reset to factory defaults, no idea why, but when trying to restore the Configuration Backup all I get is "Restore Failure <Unmatched pid>"

View 2 Replies View Related

Cisco Routers :: RVS4000 - Will Config Backup From V1 Restore To V2 Properly

Jun 3, 2012

I'm replacing an older (& failing) RVS4000 v1 with a new V2.  I need to minimize downtime.  Will a config backup from the old v1 restore properly to a new v2 (all have newest firmware)?  There are a lot of tweaks including several VPNs and to do it all manually is not desirable.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS5.2 Backup And Restore On A Different Software Version?

Oct 3, 2011

We are trying to make a restore from the backup done on ACS version 5.1 to a new appliance running ACS5.2 Before doing it I found this note in Cisco ACS user guide:
 
Note: You cannot back up data from an earlier version of ACS and restore it to a later version. Backup and restore must be performed on the same version of ACS. If you need the data on a different version of the ACS, you can perform an upgrade after you restore the data. Refer to the Installation and Setup Guide for Cisco Secure Access Control System 5.1 for more information on upgrading ACS to later versions.
 
How should I understand it? This note has conflicting statements. We can't restore to a later version but if you need data on a different version of ACS you can perform an upgrade AFTER YOU RESTORE the data. Doesn't it mean that the restore will still work? How would I do the upgrade to version 5.2 or even version 5.3 that was announced to be released very soon? I didn't find anything on the software upgrade in ACS5.1 guide.

View 4 Replies View Related

Cisco Switching/Routing :: Backup And Restore ASA 5505 Config

Dec 21, 2011

I need to backup my ASA 5505 configuration and restore it to default, then I'll configure manually the new config, but if something doesn't work I want to restore the backup made before.
 
I tried the "copy run tftp" command, and it always answers the same: Result of the command: "copy run tftp" [code] I read everywhere its supossed to prompt asking me tftp server address and file name.

View 7 Replies View Related

Cisco Routers :: Moving From Faulty SRP527 To SRP 547 - Restore From Backup?

May 8, 2012

I'm trying to move from a faulty SRP527 to SRP 547 - I tried a Restore from Backup, but it doesn't work.So start from fresh, and I'm having an issue trying to add a 2nd SSID to a VLAN...
 
I keep getting the error:
 
"FAILED! SSID 2 has joined another VLAN"
 
Except it hasn't... its not assigned to any VLAN...

View 2 Replies View Related

Cisco Switching/Routing :: Command In 6513 To Take IOS Image Backup And Restore?

Apr 18, 2013

I need to know the command to take the Backup and Restore of IOS Image of 6513 through tftp server.

View 6 Replies View Related

System Restore Failed To Replace The File

Jan 4, 2012

After unable to connect to my wireless network, I did a restore - but got a message: System restore failed to replace the file (C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking98c An unspecified error occurred during System Restore (0x80070002)I've tried 3 restores to get the same message.Am at a loss to get the computer back on line.Running win7 (32Bit) with Norton 360.

View 9 Replies View Related

Cisco :: LMS 3.2.1 - Cannot Backup Running Configurations In RME 4.3.2

Jan 18, 2013

Platform: LMS 3.2.1 with RME 4.3.2 on Windows 2003.I'm having a problem with several devices that were backing up fine until this week - suddenly they aren't backing up their running configurations, but RME is fetching their startup configurations fine and VTP backups are fine. At first I thought it might be timeouts, so I used inline edit to incease the telnet timeout for a device to 180s. However, the job fails well within this time period (debug shows on i/o error?). My order of protocols is SSH, Telnet, TFTP. I took a stab in the dark that this suggested a database problem so I picked one at random and deleted it from DCR, and readded it and it worked. However, for the other 48 devices affected it did not.
 
I'm wondering if I need to do anything to the RME database to get things back to where they were? Do I need to reinitialize the RME database, and if I do that what do I lose? [code]

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 - Cannot Find Backup File

Jan 20, 2013

I had ACS 5.2 ( Evalution License ) setup installed on VMware with patch 11 when I try to restore earlier backup of ACS gives me  error "Cannot find acsbackup_instance.log in the backup file"

I am using Filezilla FTP sever for backup transfer.

View 5 Replies View Related

Cisco Routers :: RV082 Backup File View?

Sep 19, 2012

Is there a way to view the contents of the .exp file generated from exporting the configuration from RV082? I've got a couple of RV082 that have the same rules, but want to compare the configuration. 

View 2 Replies View Related

Cisco Switches :: File Extension For Download Backup Configuration Sg300-10

May 7, 2012

i want to download an backup of the configuration file of my Cisco sg300-10 but do not know what to call the file extension.. backup.??? backup.img? backup.ros ?

View 4 Replies View Related

Cisco :: LMS 3.2 / CiscoWorks - Receiving Error Backup Lock File Exists

Aug 14, 2011

Whenever I tried to do backup of CiscoWorks from GUI, I am receiving a error message"Backup failed. ERROR(292): C:PROGRA~1CSCOpx/backup.LOCK file exists, look into the log file C:/PROGRA~1/XCSCOpx/log/dbbackup.log for more details". backup.LOCK file size is 0KB.I am using LMS 3.2; RME 4.3.0;CM 5.2.0

View 1 Replies View Related

Cisco Wireless :: How To Take Backup Of Configuration File For WLAN Controller 4420

Nov 4, 2012

I need to take the backup of configuration file for WLAN Controller 4420, I tried all the possibilities given in the documentation but the backup fails, I have main confusion with the file name to be backedup, i am not able to findout the configuration filename any where even when i use CLI?

View 1 Replies View Related

Linksys Wired Router :: RV042 Config Backup (EXP) File

Aug 2, 2009

I need some info on how to open an RV042 config backup (.exp) file. I recently had an RV042 that got very wet and it is now dead, and I do not have another on hand. BUT I do have the config Backup that includes the user MAC authentication list that I really need. Is there a way to get this information other than loading into another RV042.

View 4 Replies View Related

Cisco AAA/Identity/Nac :: ACS 1121 Running 5.2 - Edit Hosts File?

Apr 13, 2011

Is it possible to edit the hosts file on an ACS 1121 server running ACS 5.2? Our problem is we have a single domain with multiple domain controllers at different sites. So when the ACS server tries connecting to the domain it randomly picks a domain controller which it can't connect to thus causing it to fail.

View 5 Replies View Related

Cisco Switching/Routing :: C3750 - Running Configuration File

Aug 7, 2008

We have a bunch of switches that are running fine but the running-config file is missing and we can't save the config to the tftp server. IOS is c3550-ipbasek9-mz.122-37.SE1.  I've got lots of these switches running the same code that are just fine.

View 8 Replies View Related

Server 2008 R2 Windows Server Backup

Dec 14, 2010

I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?

I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.

View 19 Replies View Related

Cisco :: WCS 7.0.230.0 Server Backup

Nov 21, 2012

if i  enable Controller Configuration Backup is that included  in the server backup? and can the controller configs be specifically  extracted from the server backup?

View 8 Replies View Related

Cisco :: How To Configure External FTP Backup Server NCS 1.1

Mar 12, 2013

How do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.           

View 1 Replies View Related

Cisco :: How To ASR 9k Auto-backup To External FTP Server

Jun 20, 2012

How to take auto  running configuration backup when use commit command in asr9k  .Our asr9k sofware Version 4.0.1[Default] .I usse the commands

ftp client password encrypted 050D121F345F4B1B4
ftp client username cisco
ftp client source-interface GigabitEthernet0/0/0/14
ftp client anonymous-password cisco
(Password information changed)
 
configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf But auto backup not happening .following errror showing after every COMMIT command.

( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
 
Manually I able to take Running-configuration backup through ftp int same lacation (ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved