Cisco :: LMS 4.0 Server Backup / Restore
Mar 9, 2012We want to take the current configuration backup of the LMS 4.0 (Installed on Win 2003 Enterprise) and restore the same to a new windows machine (Win2003 standard edition).
View 1 Replies
ADVERTISEMENT
Cisco :: Restore 5.2.148.0 Backup File On Different Server Running WCS?
Feb 10, 2011If the hostnames are the same - can I restore the backup file from a wcs 5.2.148.0 instance on a different wcs instance running wcs 6.0.196.0?
View 1 Replies View RelatedCisco :: Backup And Restore LMS 3.1?
Apr 11, 2012We have cisco works LMS 3.1 and the server have very problems, we need format the server and reinstall the Cisco Works, when I doin backup and restore of data LMS We lost the licenses? or when we restore the data in the server we have the same licenses? or get the new licenses to cisco?
View 5 Replies View RelatedCisco :: WCS 7.0.220.0 Backup Restore Failed
Aug 21, 2012I am facing a failed issue when restoring the WCS Database. Below is the error i get, does any one out there facing it before?
#######################################
[root@egwgwcs WCS7.0.220.0]# ./Restore
Please enter the full path of the backup file name: /opt/WCS7.0.220.0/Backup_File/WCS_Aug2012.nmsbackup
Untaring the backup file...
Failed to untar backup file. Exception: invalid stored block lengths
Restore database failed.
#######################################
Cisco WAN :: Restore Backup From C2960 To Other One?
Jan 8, 2012I want to restore a backup from c2960 to other one.Why is recommended to remove any security commands, like AAA?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.1 Backup Restore?
Oct 20, 2011I've been setting up building and testing our new ACS 5.x boxes and I've been running into a spot of bother with the backup restore feature. This most likely due to my unfamiliarity with the tool.
As part of my testing for Backup/Restore, I first backup the data using the Removal and backup tool in Secure ACS View (found under data management. I then confirm that the new FULL backup has been populated my test repository and is available in the restore feature. (also under Data Management) My next step is to create a few test Network Device Groups, Identity groups, and users Then I go back to the restore feature select the Back up file I just created, I also check the box Skip View Database backup before Restore and hit the restore button.
The box goes through the expected steps including a reload. When it comes back up I would expect the test users, groups etc I created after the last backup to be gone as they did not exist at that time. Although I find the opposite is true. Any settings I made after the last backup are still present. I do not have incremental backups enabled.
I essentially want to test a backup of the database of users and groups/rules etc make changes and then restore that database to the previous backed up configuration.
Cisco VPN :: ASA 5505 - Backup Restore Certificates
Oct 10, 2011I have a Cisco ASA 5505 as a BOVPN endpoint using certificates. The config is complete and I now need to back it up and restore to a cold standby Cisco ASA 5505 that will sit on the shelf until something goes wrong.
Problem is I cannot restore my certifcates to the standby.
I have tried the backup and restore wizard in ASDM and to be honest it didn't work.
Cisco :: 5508 - NCS Configuration Backup And Restore Of WLC
Jan 10, 2012I recently tested the process for a customer of defaulting a Cisco WLC to factory configuration and then restoring the configuration from Cisco NCS. It was not seamless to say the least and I wonder if I have just gone about it the wrong way.
Have have set the NCS platform to configuration sync with the 5508 controllers at 04:00 every day and prior to the controller defaulting I ensured that NCS also reported that the config was in sync. I have also set NCS to complete a tftp backup of the controller every night 23:00 - interestingly though I have no idea where this is stored on the NCS platform ( a VM appliance ) or what it's file name is.
Anyway my experiences where as follows:-
1. defaulted WLC and via serial CLI ended up at the configuration wizard.
2. Set the correct LAG, management IP, host name that NCS knew this controller by.
3. To test things just created a dummy WLAN ( SSID ) as I assumed this would be overwritten ( big mistake ! ).
At this point I connected the controller to the network and tried to restore the configuration from the config sync version.
First problem - you have to remember to set up the SNMP community string you were using as it is needed by the configuration sync process. After adding this to the controller I could push the configuration to the controller.
Second problem - failed to add the first WLAN from the backup as I have added the temporary dummy W LAN via the wizard and NCS reported a conflict. So had to delete WLAN ID 1 from the WLC GUI directly and then the config push no longer reported this error.
Third problem - for some reason did not add the TACACS server details - reported the error that it could not added them. I manually added these via a template via NCS and all was well.
Fourth problem - all but the first WLAN was in the disabled state - had to re-enable all of the WLANs.
Fifth problem - any default items I had disabled or removed have not been saved - therefore I have removed the public and private SNMP communities - but these were still on the WLC after the restore. I have disabled unused ports not in the LAG as they show an error in NCS - these where not disabled after the restore.
So all in all not a very satisfactory restore process from NCS to an defaulted WLC ( meant to simulate to the customer what would be needed if they had to replace a controller due to hardware failure ).
Cisco :: Backup And Restore Quarantines Ironport C170
Dec 20, 2011Is there anyway to backup and restore the spams quarantine to another ironport c170?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160N Cannot Restore Configuration Backup
Mar 27, 2010I have a WAG160N and its seems to have reset to factory defaults, no idea why, but when trying to restore the Configuration Backup all I get is "Restore Failure <Unmatched pid>"
View 2 Replies View RelatedCisco Routers :: RVS4000 - Will Config Backup From V1 Restore To V2 Properly
Jun 3, 2012I'm replacing an older (& failing) RVS4000 v1 with a new V2. I need to minimize downtime. Will a config backup from the old v1 restore properly to a new v2 (all have newest firmware)? There are a lot of tweaks including several VPNs and to do it all manually is not desirable.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS5.2 Backup And Restore On A Different Software Version?
Oct 3, 2011We are trying to make a restore from the backup done on ACS version 5.1 to a new appliance running ACS5.2 Before doing it I found this note in Cisco ACS user guide:
Note: You cannot back up data from an earlier version of ACS and restore it to a later version. Backup and restore must be performed on the same version of ACS. If you need the data on a different version of the ACS, you can perform an upgrade after you restore the data. Refer to the Installation and Setup Guide for Cisco Secure Access Control System 5.1 for more information on upgrading ACS to later versions.
How should I understand it? This note has conflicting statements. We can't restore to a later version but if you need data on a different version of ACS you can perform an upgrade AFTER YOU RESTORE the data. Doesn't it mean that the restore will still work? How would I do the upgrade to version 5.2 or even version 5.3 that was announced to be released very soon? I didn't find anything on the software upgrade in ACS5.1 guide.
Cisco Switching/Routing :: Backup And Restore ASA 5505 Config
Dec 21, 2011 I need to backup my ASA 5505 configuration and restore it to default, then I'll configure manually the new config, but if something doesn't work I want to restore the backup made before.
I tried the "copy run tftp" command, and it always answers the same: Result of the command: "copy run tftp" [code] I read everywhere its supossed to prompt asking me tftp server address and file name.
Cisco Routers :: Moving From Faulty SRP527 To SRP 547 - Restore From Backup?
May 8, 2012I'm trying to move from a faulty SRP527 to SRP 547 - I tried a Restore from Backup, but it doesn't work.So start from fresh, and I'm having an issue trying to add a 2nd SSID to a VLAN...
I keep getting the error:
"FAILED! SSID 2 has joined another VLAN"
Except it hasn't... its not assigned to any VLAN...
Cisco :: How To Restore ACS Config From An Existing Backup File In ACS Cluster Deployment
May 21, 2012How can we restore ACS config from an existing backup file, in an ACS cluster deployment? is it through CLI? with"restore"or"acs restore" command? and should I restore only the ACS config or both ACS and ADE-OS config?
View 4 Replies View RelatedCisco :: How To Make Simple Backup / Restore Running Config Jobs On LMS 4.1
Oct 20, 2011have some problems with setting up jobs for the backup running config on my switches. Have RW and RO contact with everyone and can change the config in editor, but do not get config.txt
View 1 Replies View RelatedCisco Switching/Routing :: Command In 6513 To Take IOS Image Backup And Restore?
Apr 18, 2013I need to know the command to take the Backup and Restore of IOS Image of 6513 through tftp server.
View 6 Replies View RelatedLinksys Wired Router :: RV042 - Convert EXP To Config File To Restore Backup Into New Router
Jun 7, 2011I have a problem with the router Linksys RV042, I made a backup of it that contains a file with the extention .exp Now we have buy a new Rv042 made by cisco and the backup file is .config the question is how I convert the .exp file to a .config file so I can Restore the backup in to the new router?
View 1 Replies View RelatedServer 2008 R2 Windows Server Backup
Dec 14, 2010I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
Cisco :: WCS 7.0.230.0 Server Backup
Nov 21, 2012if i enable Controller Configuration Backup is that included in the server backup? and can the controller configs be specifically extracted from the server backup?
View 8 Replies View RelatedCisco :: How To Configure External FTP Backup Server NCS 1.1
Mar 12, 2013How do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.
View 1 Replies View RelatedCisco :: How To ASR 9k Auto-backup To External FTP Server
Jun 20, 2012How to take auto running configuration backup when use commit command in asr9k .Our asr9k sofware Version 4.0.1[Default] .I usse the commands
ftp client password encrypted 050D121F345F4B1B4
ftp client username cisco
ftp client source-interface GigabitEthernet0/0/0/14
ftp client anonymous-password cisco
(Password information changed)
configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf But auto backup not happening .following errror showing after every COMMIT command.
( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
Manually I able to take Running-configuration backup through ftp int same lacation (ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .
Backup / Sync Between File Server?
Mar 21, 2013I have a Nas4Free (FreeBSD) server on location A and another Nas4Free server on location B.
I need to regulary access to location B's some folder from Windows machine at location A. What is the best scenario for this?
I think to rsync those folders/files every night to location A, but then I think what if in the future there are many other locations (C, D, E, F) that need to be rsynced to location A, that will make location A need a very large harddisk space that maybe not available in the market or limit
by the hardware/BIOS support.
Cisco VPN :: ASA 5505 Backup Configuration To TFTP Server?
Oct 4, 2011Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message.
View 1 Replies View RelatedCisco Firewall :: Backup ASA-5510 From A Server Via TFTP?
May 29, 2012ow to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:
access-list 55 remark PERMIT hosts requesting TFTP access
access-list 55 permit host 172.16.0.27
and allowing access to
tftp-server nvram:startup-config 55
all this inside the router or the switch. From the Linux box just running a simple command such as:
tftp 172.16.0.3 -c get startup-config newbackup.conf
where 172.16.0.3 is the IP address of the switch and newbackup.conf is the name of the config file stored on the Linux machine.So, how do I do that with an ASA box? how to backup ASA from inside it.
Cisco :: LMS 4.2.3 Database Backup On Server Is Frequently Failing
Mar 3, 2013Database backup on the LMS server is frequently failing due to job conflict and we have upgraded the lms from LMS 4.2.2 to LMS 4.2.3 to fix this but no luck. same issue we are facing again in the 4.2.3.
View 4 Replies View RelatedCisco VPN :: 5510 - AnyConnect Backup Server When Session Limit Hit
Mar 21, 2012Is it possible for AnyConnect to utilise the backup server defined in the connection profile when the session limit is hit on an ASA? Essentially if I hit the 250 limit on my ASA 5510 in Region A, will it try the backup server ASA defined in the connection profile which is in Region B?
From what I have read, the backup server only kicks in when the AnyConnect client cannot connect, but in this scenario it will connect but get an error message.
Cisco Application :: ACE 20 Does Send Connections To Backup Real Server
Aug 23, 2012I have a problem with that the ACE20 (A2(3.2)) does send the connections to a backup real server in the serverfarm. I will how to troubleshoot in this case ? This is serverfarm configuration.
serverfarm host fix-http
failaction purge
probe PROBE-TCP-80
rserver fix11
inservice standby
rserver fix12
Cisco :: Prime LMS 4.2 Soft Appliance Vmware Server Backup
Jun 13, 2012I have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
Cisco Infrastructure :: 831 - Cannot Backup Config To Local TFTP Server
May 24, 2012I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
Cisco Infrastructure :: 7206 Down / Connection Would Automatically Needs To Shift On Backup Server
Jan 7, 2012I have a DLSW connectivity between 2800 series router and 7206 router. AS 400 is directly connected to 2800 series router and other server is connected directly to 7206 router. now i want to add one more server which will work as backup for the server connected to 7206 . What would be the connectivity/configuration to make it working in case primary server connected to 7206 is down or connection would automatically needs to shift on its backup server.
View 1 Replies View RelatedSharing :: Use Old Computer As Auto-sync Backup And Production Server?
Jun 20, 2011I have this idea of using my old computer (which is still pretty awesome) as a back up + production server. What this would entail would be that each person in my house has a dedicated hard drive that auto-syncs folders they've selected for backing up (not Memeo under any circumstances!). Then there will be a hard drive for me to work on web projects on. I'd like this computer to be very secure but if needed, I could show my work on the production drive to my boss.
View 6 Replies View RelatedCisco Switching/Routing :: 4506e Start-up Config Backup To Tftp Server
Mar 15, 2012how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies View Related