Cisco :: Prime LMS 4.2 Soft Appliance Vmware Server Backup

Jun 13, 2012

I have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer  would like to know if LMS 4.2 is compatible with his backup agents  :

* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)

If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?

View 1 Replies


ADVERTISEMENT

Cisco :: LMS Prime 4.1 Soft Appliance Backup

Jan 17, 2012

We have an installation of Cisco Prime LMS 4.1 soft appliance on VMware and i would like to ask if it is possible to backup the database on an external drive other than the 'local' LMS hard disk.

View 3 Replies View Related

Cisco :: Setup Prime LMS 4.2 With Pair Of Soft Appliance?

Jun 10, 2013

I am trying to setup prime LMS 4.2 with a pair of soft appliance. As I understand that HA is possible with the use of veritas/vmware for windows/solaris; I was wondering what are the possible high availability options available with a pair of prime LMS appliances? Can it form active/secondary with data synchronization/data redundancy of the LMS on top of the traditional backup/restore of the lms?

View 1 Replies View Related

Cisco :: Backup Space In LMS 4.2 Soft Appliance?

Oct 15, 2012

LMS 4.2 Soft Apliance has default:
 
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/smosvg-optvol
105G  4.8G   95G   5% /opt
/dev/mapper/smosvg-varvol
53G  268M   50G   1% /var
 
Where to create Backup folder? Under /opt or /var ?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Backup Admin Requested To Install VMWare Tools On ACS 5.3 Server

Nov 11, 2012

to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.

View 2 Replies View Related

Cisco :: LMS 4.2 Upgrade To LMS 4.2.1 On Soft Appliance

Jul 10, 2012

I try to upgrade LMS 4.2 to LMS 4.2.1 on a soft appliance and i got this error. To upgrade from LMS 4.2 to LMS 4.2.1:
 
lms/admin# conf t
lms/admin(config)# repository myrepo
lms/admin(config-Repository)# url disk://opt
lms/admin(config-Repository)# end
lms/admin# application upgrade Cisco_Prime_LAN_Management_Solution_4_2_1upgrade.tar.gz myrepo
Save the ADE-OS running configuration?(yes/no) [yes]? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Local file not found
lms/admin#

View 3 Replies View Related

Cisco :: LMS 4.1 Soft Appliance Host-name Setup

Jan 24, 2012

While running the install wizard of soft appliance LMS 4.1 it asks for hostname and also the domain during the install. Is the hostname suppose to be fully qualified domain name exp: foo.blah.com or just hostname without fqdn exp: foo? Reason why I ask is when I ran the following command below in the shell it doesn't look like it is setup correctly. Also if I did the install without my hostname in dns first will this mess up my install?

View 3 Replies View Related

Cisco :: LMS 4.2 Soft Appliance - Remote Backups

Nov 18, 2012

I have a new installation of LMS 4.2 on the Soft Appliance and seem ot be only able to configure backups to the local disk? There is no option to select any of the configured repositories like there is in ACS. I can backup to /local disk, after change to filesystem as below:

chgrp casusers -R /local disk chmod 0775 /local disk 

But the issue is, how to I get this off the box in an automated fashion so it can be part of our corporate backup schedule?

View 0 Replies View Related

Cisco WAN :: ATM Soft Pvc Across T3 And T1 Backup?

May 3, 2006

I am trying to create a VBR soft pvc across a T3 and T1 backup link, but I am confused about what values to use for PCR, SCR and MCR.  If I use high values for the T3, what will happen when this link is down and the soft PVC reroutes across the T1?  I would like to use percents (%) for the values, i.e. voice can use 25% of the link, then it would make more sense when using the backup T1 link.

View 2 Replies View Related

Cisco :: LMS 4.2 Appliance On VMware VSphere 4.0

Jul 31, 2012

I'm currently trying to install the Cisco LMS 4.2 Appliance on a VMware vSphere 4.0 environment.I'm following the [URL]. I downloaded the Cisco_Prime_LAN_Management_Solution_4_2.iso and I started the server.I get this screen and I choose option 1:

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Migration ACS 5 Appliance To ACS 5.1 Vmware

Jun 7, 2011

I'm with problems to migrate the ACS 5.1 hardware to  ACS 5.1 vmware. In my infraestructure I have a appliance with ACS 5.1 and I need to migrate to vmware to do HA. I installed vmware as the Cisco ACS recommendations. I made ​​a backup of the ACS hardware and copied the local disk vmware ACS.
 
When I start the restore process after a few minutes an error occurs:
 
UMA/admin# dir
Directory of disk:/
    33293306 Jun 08 2011 16:51:38  bkp-production-110608-1433.tar.gpg
       5862 Nov 07 2009 01:06:32  favicon.ico.1
      16384 Jun 06 2011 17:54:34  lost+found/
[Code]....

View 4 Replies View Related

Cisco :: VMware Tools On Prime LMS 4.1?

Jan 18, 2012

I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.

View 7 Replies View Related

Cisco Wireless :: 5508 - Prime NCS Appliance And License

Aug 29, 2011

I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:

1. Does the appliance has any license coming with it or we need to order the license separately?
2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ? 

View 12 Replies View Related

Cisco :: 7.0.172 / Manual Backup The Location Appliance?

Jun 19, 2011

I upgraded wcs to version 7.0.172 and migrated it to new server and ip address. The upgrade was done by install wcs 7.0.172 on new server and restoring a backup. I also upgraded the location appliance from 6.0.101.0 to 6.0.202.0. The wcs can see the location appliance without a problem. The problem occurs when i try to backup the location appliance. The wcs appears to run the backup and completes with a success but i cannot find the backup file in the ftp directory. wcs backup to ftp folder is fine.is a there a way of doing a manual backup the location appliance what logs can i check to see whether the backup is taking place or not?

View 2 Replies View Related

AAA/Identity/Nac :: Windows ACS 4.2.0 Backup Database On 1120 Appliance 4.2.1.15?

Apr 26, 2011

I am running windows based acs 3.3 in my lan environment going to be replaced with acs 1120 appliance running acs 4.2.1.15 , ACS 3.3 database has been built upto  4.2.0.124 ,step by step by upgrade process
 
1) acs 3.3.3.14---> 4.1.1.24
2) acs 4.1.1.24 ----> 4.2.0.124 .
 
now my database is with 4.2.0.124 dmp file , I cannot upgrade my database to 4.2.1.15 because 4.2.1.15 patch is not applicable & executable  on 90 days evalution package of 4.2.0.124 of windows platform .
 
can i import my windows based 4.2.0.124 datbase directly to my acs appliance running 4.2.1.15.3 ??? , else its requires any step to be done to modify the windows based databse matching to appliance windows verison once .
 
I could see on appliance under restore settings the following options (restore from 4.2.0 backup file to acs 4.2.1)

View 8 Replies View Related

Cisco :: Prime Infrastructure 1.3 FTP Backup

May 26, 2013

I try to create a reposiroty for FTP Backup but it is not working with directories. Isn't it possible to create FTP repositories with directories?
 
I need to ad this URL e.g.: ftp://server/IT/Wi-Fi/Backup           
 
This is not working. % Error reading directory on remote server
 
It works only when I add only the server. ftp://server/
 
Is there any way to add directories to the URL? Or what is wrong in my thought?
 
I think to use NFS but I'm not sure if that way is better as FTP, because FTP is default

View 4 Replies View Related

Cisco :: Restoring Backup After Prime V4.1 To V4.2 Upgrade

May 18, 2012

I'm trying to restore backup after upgrading Cisco Prime v4.1 to v4.2. However, getting the following error in the log. [code] The log shows the error is a continuous one and affraid it may be a loop. Currently my restore progress is stuck at 70%RME restoration.[code]

View 2 Replies View Related

Cisco :: Prime 4.2 Backup Of Device Config

May 21, 2012

We are currently running Cisco prime 4.1 and want to make sure there is a backup of the configurations from our switches and routers. The VLANconfig is not collected according to the devicestatus dashboard. i am aware there were a known issue with LMS running on a virtual server and vlan not being able to be collected, is this issue resolved? i have tried the various workarounds with TAC support and it hasnt worked. We have the running and startup config collected for our devices when looking at the device status dashboard. does this mean if a switch crashes we can restore the config to a new switch immediately?
 
i saw there is a version 4.2. maybe this version resolves the issue with LMS on a virutal server? i cannot find the download to upgrade to 4.2 in the support section though.

View 1 Replies View Related

Cisco :: Migrating ACS 4.0 In Windows Server To ACS 5.4 VMware

Dec 4, 2012

We have 2 separate ACS 4.0 servers installed on windows 2003 server(2 separate location) Both these servers are Integrated with Cisco WLSE and Corporate AD.
 
 Now, we are planning for Migrating to ACS 5.4 on VmWare ESXi 5.1. And need to Integrated with Cisco WLSE and Corporate AD.
 
Can we import the datas from 2 x ACS 4.0 server to this new Single ACS 5.4 vmware server?

View 7 Replies View Related

Cisco AAA/Identity/Nac :: ACS Remote Agent 4.2.1 On VMWare Server?

Jul 17, 2011

it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?

View 2 Replies View Related

Static Ip Is Not Working On Server 2008 Via VMWare 0.7?

Nov 2, 2011

I install virutal machine "VMWare Workstation7" on windows 7, i am mcitp student for practice i am using windows server 2008 on VMWare, but i can't assign static ip whenever i assign ip it show no access to the internet?

View 3 Replies View Related

Cisco Switching/Routing :: Best Configuration Between Vmware ESX Server 6500

Dec 6, 2012

what is the best configuration between vmware ESX server with 10 Physical NIC card and cisco 6500 , This ESX Server host 12 vm with VLAN 100,150.200.

View 6 Replies View Related

Cisco :: 3750G NTP Getting A Network Time Server Appliance

Oct 12, 2012

We want to get a network time server appliance that will be used only as a device to provide time to network devices as well as workstations. Our network infrastructure contains CISCO 3750G's, 4506's and 6509E. 

View 0 Replies View Related

Cisco AAA/Identity/Nac :: Add SNMP Server IP And Community In ACS 3.2 Appliance

May 23, 2012

how to add an snmp server ip and community in the ACS 3.2 appliance .

View 3 Replies View Related

Cisco Application :: ACE4710 Appliance To ANM Virtual Appliance NATed

Oct 12, 2011

We have an ACE Appliance in a DMZ and the ACE Appliance's Admin Context IP is translated between ACE and ANM. The ANM Server does not get translated. It is just the opposite then in another Community discussion.
 
Our Problem: When adding the ACE4710 Appliance to the ANM imported Device List, we use the ACE's NATed Admin Context IP. Import works well, but ANM reflects the Admin Context IP with it's real configured IP. Polling the ACE Appliance does not work therefore.
 
Is there a possibility of telling the ANM, that the ACE has to be polled through a NATed IP? I could not find a field to set a NATed Mgmt IP.
 
Configured IP on ACE Admin Context: 192.168.0.10
NATed ACE Admin  Context IP:           172.16.0.10
 
Imported ACE with IP 172.16.0.10 into ANM, but ANM polls for Rserver, Vserver, Probes, etc. via 192.168.0.10 - which is not reachable from the ANM.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS Server 5-2 Appliance Gentle Shutdown Method?

Mar 29, 2011

I need to move our (secondary instance, version 5-2) ACS server to a different server rack and I have not been able to find a gentle way to shut down the appliance (not the windows version).  Does one exist or is it just the power button/cord?

View 2 Replies View Related

Server 2008 R2 Windows Server Backup

Dec 14, 2010

I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?

I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.

View 19 Replies View Related

Cisco VPN :: Adaptive Security Appliance Asa 5540 Unable To Block Server Ports

Aug 10, 2011

I was configure IPSEC vpn on ASA5540 and i have problem with port blocked.  I am unable to block server ports to remote users.See below configuration.  I need to configure vpn filter list but don't know how to configure vpn filter list.

View 5 Replies View Related

Cisco :: Prime Infrastructure 1.2 Server License Distribution?

Feb 18, 2013

We currently support multiple companies' infrastructure on a single Prime Infrastructure 1.2 server. We are using lifecycle licenses. Is it possible to assign licenses to various Businesses? For example, can I upload 100 licenses for Company-X and 100 licenses for Company-Y and when adding devices into Prime, tell it which licenses pool to pull from? Could something like this be accomplished with virtual domains?

View 3 Replies View Related

Cisco :: L-PI-1.1-CM-500 / Prime Infrastructure 1.x Server Requirements And Operating System?

Feb 2, 2013

I need to order LMS for one of our customer with 500 devices and reporting capabilities ..... So i chose base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and Compliance Management - 500 Device License "L-PI-1.1-CM-500"? i tried to search server capability for my requirements & Operating system and couldn't find it .....
 
1) What is the server requirements ?

2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)

3) Is their any dedicated appliance from Cisco ?

View 2 Replies View Related

Cisco :: Operate Both Prime Fulfillment 6 AND LMS 4 On Single Solaris 10 Server?

Feb 22, 2012

Is it possible to easily operate both Prime Fulfillment 6 AND LMS 4 on single Solaris 10 server?

View 1 Replies View Related

Cisco :: WCS 7.0.230.0 Server Backup

Nov 21, 2012

if i  enable Controller Configuration Backup is that included  in the server backup? and can the controller configs be specifically  extracted from the server backup?

View 8 Replies View Related

Cisco :: LMS 4.0 Server Backup / Restore

Mar 9, 2012

We want to take the current configuration backup of the LMS 4.0 (Installed on Win 2003 Enterprise) and restore the same to a new windows machine (Win2003 standard edition).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved