Cisco AAA/Identity/Nac :: Migration ACS 5 Appliance To ACS 5.1 Vmware
Jun 7, 2011
I'm with problems to migrate the ACS 5.1 hardware to ACS 5.1 vmware. In my infraestructure I have a appliance with ACS 5.1 and I need to migrate to vmware to do HA. I installed vmware as the Cisco ACS recommendations. I made a backup of the ACS hardware and copied the local disk vmware ACS.
When I start the restore process after a few minutes an error occurs:
UMA/admin# dir
Directory of disk:/
33293306 Jun 08 2011 16:51:38 bkp-production-110608-1433.tar.gpg
5862 Nov 07 2009 01:06:32 favicon.ico.1
16384 Jun 06 2011 17:54:34 lost+found/
[Code]....
View 4 Replies
ADVERTISEMENT
Jul 31, 2012
I'm currently trying to install the Cisco LMS 4.2 Appliance on a VMware vSphere 4.0 environment.I'm following the [URL]. I downloaded the Cisco_Prime_LAN_Management_Solution_4_2.iso and I started the server.I get this screen and I choose option 1:
View 3 Replies
View Related
Jun 13, 2012
I have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
View 1 Replies
View Related
Oct 4, 2011
Can't see this in the documentation, as only Solaris to soft appliance is mentioned, so does anyone know if you can migrate data from LMS 4.0.1 on Windows 2008 to the soft appliance on LMS 4.1?
View 1 Replies
View Related
May 10, 2010
We need to move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS per Windows version 4.2.
View 10 Replies
View Related
May 27, 2013
I am reading up on the ACS VMware appliance installation instructions and am a bit confused on the disk space requirements. It says 60Gb is required and then goes on to talk about 500GB for the secondary instance. Do I need more than 60gb? Is the secondary instance a separate machine or part of the same one?URL
View 5 Replies
View Related
Jan 21, 2013
is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies
View Related
Feb 9, 2012
Are there any recommendations for configuring the VM for the ACS 5.x? What are the required minimum CPU-Cycles to dedicate and also the minimum RAM to dedicate?
View 1 Replies
View Related
Aug 27, 2012
What are the VMware requirements to run ACS4.1.4? Im trying to use a VM this as the migration server. According to the cisco docs, it states that: "ACS 4.1 has been tested on the VMWare ESX server with the following configuration:
•VMWare ESX Server 3.0.0
•16 GB of RAM
•AMD Opteron Dual Core processor
•300 GB hard drive
•Four virtual machines
•Windows 2003 Standard Edition
•3 GB of RAM for the guest operating system"
I understand it will work as it "has been tested" with those specs, but the doc does not state the minimum requirements for the virtual machine. I dont want to use/find 300GB of space if I only need 20GB(as an example) to make it work.
View 2 Replies
View Related
May 18, 2012
I am trying to install ACS 5.0 on workstation, however once the install finsihes it reboots and I enter the Linux bash command line rather than the Cisco CLI.
Note - this is now fixed. I followed the steps here to install ACS 5.0 on VMware Workstation 7: url...
View 2 Replies
View Related
Mar 7, 2012
I have a client that is running ACS 5.3 as a VM in ESX 4.1. The client wants their VMWare admins to have the ability to shut down the ACS server during maintenance etc... I know I could create a CLI user with admin priviliges, however, assigning full admin priviliges is beyond the scope of what the user requires. They simply want a user account with the added privilige of performing a halt from the CLI. In the CLI Reference Guide for ACS.
So is it possible to create an account with user priviliges, then modify its permissions to allow for a halt?
View 3 Replies
View Related
Jul 17, 2011
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies
View Related
May 19, 2013
I have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
1/ Primary Server as Authentication server & log collector
2/ Secondary server as Authentication server.
What is the best way to do the migration? Normaly, i can proceed as follows:
1/ Deregidter each server from the deployement ==> Make both the servers standaone
2/ Upgrade the Secondary server.
3/ Upgrade the Primary server (without migrate the log server).
4/ Join Servers to the deployement.
View 11 Replies
View Related
Mar 22, 2011
what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?
View 2 Replies
View Related
Jan 14, 2012
I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?
View 1 Replies
View Related
Jun 11, 2012
If we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?
whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?
View 1 Replies
View Related
Jun 12, 2013
I need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4
View 5 Replies
View Related
Nov 11, 2012
to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies
View Related
Jul 1, 2012
We have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.
View 6 Replies
View Related
Jun 13, 2011
I'm planning migration from ACS 3.3 to a new machine, so I'm thinking about new Cisco ISE.I have the following question: ACS 3.3 acts as AAA RADIUS with LDAP repositoriy for wireless deployment, using PEAP-GTC. Is possible, with ISE, to use a different EAP method, such as PEAP-MsCHAPv2 or EAP-TTLS?
In ACS 5.X I think it's only supported PEAP-GTC and EAP-TLS when identity repository is LDAP. Is the same in Cisco ISE?
View 2 Replies
View Related
Feb 20, 2010
I could not SSH to ACS SE appliance? Why I could not, however I can do on another ACS SE.
note that I can ping the ACS SE, after disabling the CSA, so netowrk connectivity is ok.
Cisco Secure ACS: 4.2.0.124.
View 5 Replies
View Related
Nov 16, 2011
All users are located in the local identity store.So - assume I do not implement ACS but I do turn on password expiration after 60 or 90 days. Will a user whose password is about to expire attempts to authenticate against ACS 5.2, will they be notified that their password is about to expire?Also, when a user attempts to authenticate but their password expired yesterday, will they be prompted to change it and if so, how will that prompt to change it be presented?
View 3 Replies
View Related
Oct 1, 2012
One of my customer wants to upgrade their Cisco ACS version from 4.0 to 5.3. The client has existing ACS version 4.0 windows on VM with two instance and need to upgrade to 5.3 Linux.As per my understanding following version are supporter to upgrade ACS to version 5.3 ACS 4.1.1.24ACS 4.1.4ACS 4.2.0.124ACS 4.2.1 but unfortunatlly there is running 4.0.I suggested to my client the upgradation for ACS and proposed this Upgrade lisence L-CSACS-53VMUP-K9 and CON-SAS-CSACS3V? how I can do the smooth deployment / Migration from 4.0 to 5.3 with (A/P)high availability.
View 1 Replies
View Related
May 9, 2011
we currently have 4x ACS 4.1 (1) build 23 windows based and we are going to migrate to ACS 5.2 appliance 11211.the first pair we are using simply local authentication for multiple vendor firewall and routers, with one custom radius vendor-specific attributes, with now she exec.the second pair we are using for wireless clients authentication through AD, with dynamic mapping.
in order to migrate what would be the most suitable migration, whether to use Migration utility or export those ACS objects and import them into the new ACS 5.2.
View 1 Replies
View Related
Jul 18, 2012
I'm using Cisco Secure ACS 4.2 for Windows to configure and authenticate VPNs external groups and users on VPN 3K concentrator.Now I'm migrating to AC System 5.3.I'm trying to configure the new system to do the same work.
I have configured a new access profile with all RADIUS attributes, than an access policy.IPSec Phase 1 completed successfully but VPN client doesn't procede with XAUTH.ACS View reports the correct rule and access service.
View 7 Replies
View Related
Mar 7, 2012
Is there a simple way to migrate shared dACL to group/user mappings from ACS 4 to ACS 5? After migration using the Migration tool provided by Cisco I get shared dACLs and also I get all my users/groups transfered but these shared dACLs are not mapped to groups or users as previously. I understand that in new ACS we do not apply authorization directly to users/groups, but then if I had in ACS 4.x a hundreds of groups and each of these groups had a dedicated dACL (shared) applied as authorization attribute now after migration to ACS 5 I have to create separate authorization profile for each of these groups which is a lot of manual work. So I'm asking for an easy automated way to migrate authorozation rules to new ACS version.
View 1 Replies
View Related
Nov 30, 2011
I cannot access WLSE, after migration from ACS 4.2 to ACS 5.2. WLSE was configured with tacacs+ management. In ACS 5.2 I've configured the optional custom attributes: groups = "System Admin"
View 2 Replies
View Related
Dec 21, 2010
I am working through the migration from ACS 4.1.4 on Windows Server 2003 to ACS 5.2 on the appliance. I have created the 4.1.4 migration server, installed the software and imported the data from our production ACS 4.1.4 box. I downloaded the migration utility from the 5.2 ACS server and am attempting to run on the 4.1.4 migration server. The question that fails is:
Enter ACS 4.x Server ID:
I do not know what this means and do not see anything on the 4.1.4 server that identifies the Server ID. I try localhost and it does not work and the 4.1.4 server is not registered in DNS or I would try that (and . are not valid characters in the ID so the IP does not work).
How have other people handled this question? Is there something that can identify the local server ID?
View 9 Replies
View Related
Mar 29, 2012
My site got the NAC-3315 appliance and we would like to reimage this appliance to inline posture mode (for VPN purpose)What's the proper migration process should deal with this? Is the NAC-3315 hardware comply with the Inline posture mode requirement?
View 4 Replies
View Related
May 2, 2011
Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details
CSACS-1121-K9
ACS 1121 Appliance With 5.1 SW And Base license
[code]....
View 2 Replies
View Related
Jun 18, 2011
This is a new installation.I did to configure the ACS to connect to the AD to authenticate users and retrieve the user information for group mapping as following step. Go to Users and Identity Stores > External Identity Stores > Active Directory, and enter the domain name and provide a username/password that will allow connect to the domain.Next, click on the Test Connection button to validate joining the domain.
I got success test connection. But when I click Save Changes. I got error .
View 5 Replies
View Related
Feb 13, 2012
01. I have one customer unit C1121 ACS system shipped with version 5.1. The customer buy the base license and large deployment license along with the purchase.
02. Fact is i have manually upgrade the system to version 5.3.0.40, and applying a trial license for it for administering the appliance.
a. If i now using the purchased base license and large deployment PAK to activate the system, would it still valid for me to continue using Version 5.3.0.40?
View 2 Replies
View Related
May 2, 2013
Is it possible to add another NIC to the Cisco 3315 NAC appliance. It ships with Four ethernet interfaces, but would like to add at least 1 extra interface i.e. PCI card if possible.
View 1 Replies
View Related
