Cisco AAA/Identity/Nac :: What Are VMware Requirements To Run ACS4.1.4
Aug 27, 2012
What are the VMware requirements to run ACS4.1.4? Im trying to use a VM this as the migration server. According to the cisco docs, it states that: "ACS 4.1 has been tested on the VMWare ESX server with the following configuration:
•VMWare ESX Server 3.0.0
•16 GB of RAM
•AMD Opteron Dual Core processor
•300 GB hard drive
•Four virtual machines
•Windows 2003 Standard Edition
•3 GB of RAM for the guest operating system"
I understand it will work as it "has been tested" with those specs, but the doc does not state the minimum requirements for the virtual machine. I dont want to use/find 300GB of space if I only need 20GB(as an example) to make it work.
View 2 Replies
ADVERTISEMENT
May 27, 2013
I am reading up on the ACS VMware appliance installation instructions and am a bit confused on the disk space requirements. It says 60Gb is required and then goes on to talk about 500GB for the secondary instance. Do I need more than 60gb? Is the secondary instance a separate machine or part of the same one?URL
View 5 Replies
View Related
Jun 6, 2011
I'm installing ACS4.2 in our lab domain and want to leverage the corporate domain for authentication. The one way trust is in place, but there is a facet that I'm not clear on in regards to the installation requirement.
I'd like to install ACS on a lab domain member server, but I'm not sure that will work. The installation docs seem to imply that a member server must be in the same domain as the authentication server, but its not very clear. if I want to use the one way trust to the Corporate Domain, am I required to install ACS on the domain controller of the Lab Domain?
View 3 Replies
View Related
Jan 28, 2013
When the users connect their laptop they are getting a authentication prompt but the switch is not changing the VLANs on the port after successful authentication.Below are the logs on the switch
Jan 28 2013 17:21:32.417 CST: RADIUS: Framed-MTU [12] 6 1500
Jan 28 2013 17:21:32.417 CST: RADIUS: Called-Station-Id [30] 19 "E4-D3-F1-0B-C6-0A"
Jan 28 2013 17:21:32.417 CST: RADIUS: Calling-Station-Id [31] 19 "84-8F-69-A8-BD-1D"
Jan 28 2013 17:21:32.417 CST: RADIUS: EAP-Message [79] 45
[code]....
View 1 Replies
View Related
Mar 21, 2011
Any relevant doc for ACS4.2 on 1113 platform to be integrated with Unix Directory service having LDAP10.2.0.0 version from Oracle or guidance available.
View 1 Replies
View Related
May 10, 2010
We need to move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS per Windows version 4.2.
View 10 Replies
View Related
Jan 21, 2013
is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies
View Related
Feb 9, 2012
Are there any recommendations for configuring the VM for the ACS 5.x? What are the required minimum CPU-Cycles to dedicate and also the minimum RAM to dedicate?
View 1 Replies
View Related
Jun 7, 2011
I'm with problems to migrate the ACS 5.1 hardware to ACS 5.1 vmware. In my infraestructure I have a appliance with ACS 5.1 and I need to migrate to vmware to do HA. I installed vmware as the Cisco ACS recommendations. I made a backup of the ACS hardware and copied the local disk vmware ACS.
When I start the restore process after a few minutes an error occurs:
UMA/admin# dir
Directory of disk:/
33293306 Jun 08 2011 16:51:38 bkp-production-110608-1433.tar.gpg
5862 Nov 07 2009 01:06:32 favicon.ico.1
16384 Jun 06 2011 17:54:34 lost+found/
[Code]....
View 4 Replies
View Related
May 18, 2012
I am trying to install ACS 5.0 on workstation, however once the install finsihes it reboots and I enter the Linux bash command line rather than the Cisco CLI.
Note - this is now fixed. I followed the steps here to install ACS 5.0 on VMware Workstation 7: url...
View 2 Replies
View Related
Mar 7, 2012
I have a client that is running ACS 5.3 as a VM in ESX 4.1. The client wants their VMWare admins to have the ability to shut down the ACS server during maintenance etc... I know I could create a CLI user with admin priviliges, however, assigning full admin priviliges is beyond the scope of what the user requires. They simply want a user account with the added privilige of performing a halt from the CLI. In the CLI Reference Guide for ACS.
So is it possible to create an account with user priviliges, then modify its permissions to allow for a halt?
View 3 Replies
View Related
Jul 17, 2011
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies
View Related
Nov 11, 2012
to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies
View Related
Apr 10, 2011
I am working at a client site today whom has Cisco ACS employed. Their current version is 4.1. It has been some time since I have done any upgrades on this system. What is the most current version for this appliance?
View 5 Replies
View Related
Feb 10, 2011
I have a WPA2/AES network with PEAP MsChapv2 authentication. I have 2 ACS servers for authentication. The problem I have is dropped clients. Both ACS servers are setup identical. The database replcation has been preformed.A series of 10 clients connects wirelessly and they are all successful. ACS server 1 is the primary and ACS server 2 is the backup. We verified that the 10 users authenticated to the primary ACS. My time out to reauth is 30 minutes on the WiSM. 10 minutes into the test we took down the Primary server. This should have had no impact on the clients. 5 minutes later the clients lost thier authentication and were dropped from the network. They were able to reconnect by shutting down thier wireless client and reconnecting. The authentications were seen on the Backup ACS server.on a test of falling back to the primary the same thing happened again to the clients.
View 2 Replies
View Related
Jul 29, 2012
in LMS (4.1) installing guide, table 'Software and Hardware Requirements for Soft Appliance', it is stated Memory and CPURequirement:
• 4 GB, 2 virtual CPU (< = 500 devices)Host CPU Core clock speed:
• Minimum 2.26 GHz Minimum Virtual CPU Reservations: Number of recommended virtual CPUs x 2.26 GHz:
• 4520 MHz (< = 500 devices)
I have HP server with 6 core CPU 2.0GHz - does it mean it does not meet the minimum system requirements (2.26Ghz)? Will I be able to go pass the installation?
View 3 Replies
View Related
Oct 24, 2011
According to the Installation notes for ACS 5.3 we need 500GB of storage for a working installation - if not it defaults to taking 60 GB of disk space for an eval version.
View 1 Replies
View Related
Oct 17, 2012
how to setup 802.1x on the Cisco 500 Series Switches.I have done the whole implamentation in the past with Catalysts and ACS.But would like to see a guide for the 500 series.Do we need the Cisco ACS or can we use RADIUS on Windows?
View 1 Replies
View Related
Oct 4, 2012
I am planning to implement SSL-VPN (Any Connect) on an ASR 1002 router running IOS-XE Software Version 15.1(3)S2. I need to use LDAP for user authentication, and need to understand what are RADIUS/ TACACS requirements to use LDAP. Do I need to use Cisco ACS or can I use something like Microsoft IAS or Free Radius?
View 6 Replies
View Related
May 4, 2011
regarding the power requirements. I have this Cisco 6503-E switch and I need to know what I need in terms of power.
The manual says if using 120VAC, I will need 16A. If using 230VAC, the unit will require 8A.
I have 2 dedicated 20amps circuits both at 120V. Am I correct on plugging each of the power supplies of the cisco unit to each of these circuits?
Another question will be, do I really need to dedicated 2 dedicated 20amps circuits for the unit? Can't I just use one dedicated 20amps circtuis and connect both power supplies to it?
View 6 Replies
View Related
Feb 28, 2013
In Cisco ASDM 7.1(1), webvpn configuration, it is possible to configure bookmarks with "vdi://" links to Citrix's or Vmware's Virtual Desktop Infrastructures, but we couldn't find any configuration resource (conf guide) on official Cisco site: if it is actually possible to integrate Vmware View Client into ASA 9.1 WebVpn solution?
View 1 Replies
View Related
Jul 8, 2011
Am currently running BT Voyager 2091 wireless ADSL router with BT Voyager 1055 wireless USB adapter. What system requirements does one need to upgrade to 802.11n. The OS is XP Pro x32 bit x86 based PC
View 1 Replies
View Related
Jul 15, 2012
We have a 7604 chassis with the following equipments:
1. RSP720-3C-10GE
2. 7600-SIP-400
3. SPA-1X10GE-L-V2
We would like our SPA to support XFP transceiver having part number XFP-10GZR-OC192LR.
View 2 Replies
View Related
Jul 5, 2011
Got a question regarding 2921 modules. Can I use VWIC2-2MFT-T1/E1 along with NM-HDV2-2T1/E1 on 2921 and what is the minimum requirements for IOS image?
As I understand, NM-HDV2-2T1/E1 is supported on 2921, however VWIC2-2MFT-T1/E1 is not, VWIC-2MFT-T1/E1 only. But VWIC-2MFT-T1/E1 is not supported on 2921.
View 4 Replies
View Related
May 14, 2013
I need to choose router for my network. I don't have any special need, besides Internet connection and DHCP for some guest clients.There are around 30 IP phones (static IP), 30 PCs (static IP), and 10 wireless APs (users get dynamic IP). Maximum load is 5 phones, 5 PCs and 20 phones/laptops connected via wi-fi.
I guess I should go for Cisco 800 series. Would model 861 be good or I will need 881 or even 891?
View 3 Replies
View Related
Jun 4, 2013
I have a Cisco SG500-52P along with an older SGE-2010P, am I correct that in order to stack they must be the same series?
View 1 Replies
View Related
Apr 18, 2012
What vmware i have to use to install cucm 7. vmware workstation 7 or vmware server or exsi 4 or 5. Any correct link to download and vmware config settings.
View 2 Replies
View Related
Apr 24, 2012
One of our clients is going to install WCS on a Vmware machine and uninstall it from the physical server. He wants to know if he can use the same license or get another one; since he will get a new Mac address with the new VmWare machine.
View 1 Replies
View Related
Jan 21, 2013
is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies
View Related
Jul 31, 2012
I'm currently trying to install the Cisco LMS 4.2 Appliance on a VMware vSphere 4.0 environment.I'm following the [URL]. I downloaded the Cisco_Prime_LAN_Management_Solution_4_2.iso and I started the server.I get this screen and I choose option 1:
View 3 Replies
View Related
Jan 18, 2012
I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.
View 7 Replies
View Related
Apr 25, 2012
We have a scheduled office move where we are consolidating 2 remote offices into one. I’ve been asked to spec out the correct size UPS to support all of the network equipment for this new office.I went to the Cisco website and I see on the datasheet for the switches and router where they talk about the wattages and BTU’s but how can I go about deciphering from that information what my total wattage and BTU will be for each switch and router?What numbers should I be looking at? For instance, we have 3 3750 48 port PoE switches. So if I look at the datasheet for that switch they have 4 different columns, one for 100% throughput power consumption, one for 5% throughput, another one for 100% throughput for max PoE load and one for 5% throughput with 50% PoE loads?Is there a common method for deremining UPS requipments? For the switches I pretty sure I need to assume max PoE load in the event every port has a phone plugged into each port.
View 3 Replies
View Related
Jun 8, 2011
I am trying to set a little network in vmware (for do some testing on GP)in a vmware installed server2008 and win7 both are in one team Both has only one network adapter which is set to LAN1 Segment Both can ping each other Installed AD and configured DNS configured dhcp with scope 192.168.2.100 to 192.168.2.200 Set domain - [URL]Assign static to server 2008 192.168.2.101 Windows 7 can connect to domain no problem both machine got no external connectivity means cant open any webpage Do i need to add another network adapter in server2008 and set as NAT so it can connect to external network as well Can i set static IP address to 192.168.2.2 to server2008 or its has to be only within the loop basically need to setup a netwrok within a team that should be able to connect internally and externally as well ( Wont be able to connect to my host machine as need to set up VLAN for that but atleast access to internet) So wt type of vmware connection should i use
Host
NAt
LAN segment
or custom
And how many network adapter i need in each machine and which connect to which one?
View 4 Replies
View Related
