Cisco :: VMware Tools On Prime LMS 4.1?
Jan 18, 2012I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.
View 7 Replies
ADVERTISEMENT
Cisco :: LMS 4.2.2 Processes Started After Installing VMware Tools
Dec 10, 2012Yesterday I had a installation of LMS4.2.2 who was working fine. I followed the procedure to install VMware Tools on the virtual appliance on this thread url...
Now I have a problem with the processes of LMS, but maybe it is not linked. I forget to do a snapshot before installing VMware Tools so I need to find a solution. A whole bunch of services do not start know. I tried to uninstall the VMware tools, to regenerate SSL certificate, I rebooted the server several times. It is running under VMware 5.1. [code]
Cisco AAA/Identity/Nac :: Backup Admin Requested To Install VMWare Tools On ACS 5.3 Server
Nov 11, 2012to backup an ACS 5.3 vm running on ESXi 5.0 our backup admin requested to install vmware tools on the acs server.
View 2 Replies View RelatedCisco :: Prime LMS 4.2 Soft Appliance Vmware Server Backup
Jun 13, 2012I have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
Cisco :: Migrate From Prime LMS 4.0.1 To Prime Infrastructure
May 9, 2013I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
Cisco :: Link Between NCS / Prime LMS And Prime Infrastructure 4.2
Mar 12, 2013What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
Cisco WAN :: Web-based Tools For 887VA?
Apr 14, 2011what web-based programs do i need to install a 887VA? I tried Cisco CP express version 2.1, not a supported device.
View 2 Replies View RelatedNetwork Audit Tools?
Oct 10, 2012me what are the best Free tools to do a Network Audit (Thoughput, speed linksswitchs usage, analyse network topology.. etc)
View 7 Replies View RelatedWhat Tools Do You Rely On Heavily
Feb 13, 2012Other than terminal software and MS visio. Just curious to see what else gets used a lot by other tradesman or see what else is out there.TFTP32D(Url) simple and easy tftp server for windows.
View 17 Replies View RelatedCisco Switches :: 300 Network Monitoring Tools
Apr 21, 2013I am a network engineer at a company with more than 300 Cisco switches to monitor and maintain. Any recommendation on a monitoring software providing details such as network topology and links?
View 4 Replies View RelatedCisco :: Cat4500 Network Mapping Tools?
Jul 16, 2012I have a medium enviroment with 2 x Cat4500 switches and 50 x Cat3650 plus few Cat3750 switches. I'm looking for a network mapping tool to map all the network equipment so I can easy to manage or trouble shoot the network. It doesn't matter if it's free or paid but something I can try first before buy.
View 1 Replies View RelatedRemote Assistance Tools With Texting?
Jan 17, 2012what is a good way to remote assistance someone while texting them as well? I use TeamViewer and it works well except I'm on the phone with them as well. Looking for a remote assistance tool with texting as well.
View 2 Replies View RelatedChanged To Outdated Connection Tools
Aug 17, 2011I was using my computer, and it was fine. Then my Mom used it, and when I got it back, the Internet didn't work. The network connections page looked completely different. It looked like it converted to ancient networking software. There's this American Family Insurance (my mother used to work there) connection that I didn't even know was there. They want me to use dialup for a broadband connection. All the stuff is just dial up and so old I don't remember seeing that stuff anytime recently. How do I change my network connections page so it can use wifi (what this comp has)?
View 1 Replies View RelatedWhat Are The Tools Needed To Setup Network
Feb 29, 2012what are the tools needed to setup my network
View 1 Replies View RelatedCisco Firewall :: Getting PIX525 Flash Erase Tools?
May 4, 2011I have two pix525 firewalls cann't boot up normaly and i find [[URL] no longer provides the falsh erase tool ,erasedisk.bin,download.
View 4 Replies View RelatedWireless :: ZAMZOM (and Other) Network Tools Won't Install?
Apr 13, 2013ZAMZOM downloads OK, as nearly as I can tell, but I always get "error 1001" when trying to install it.
View 3 Replies View RelatedNetwork Packet Generator Testing Tools?
Apr 23, 2012I have been in this field for a few years and I found this book, Network Performance Toolkit: Using Open Source Testing Tools, to be very useful. It is full of great open source testing tools and has easy to use instructions for them all.However, to be more specific, I am looking for a packet generator that can simulate network packets over an extended amount of time. So the end result is I have this generator test my physical network for an hour but it simulates a week of real network traffic. Any tool, ideally it be open source?
View 5 Replies View RelatedTools To Monitor Internet Usage Of Network?
Jul 21, 2011I would like a free tool that would moniter the internet usage of our network. it has about 20 computers and would like the following features: be able to show the usage of each computer the type of usage, ie, browsing, downloading, streaming a total usage Is there such a free program? would Microsoft Network Monitor 3.4 be able to do the trick if i learnt how to use it?
View 1 Replies View RelatedD-Link DIR-655 :: How To Update Firmware And Bring Up All Necessary Tools
Sep 1, 2012Today i has tryed to update the firmware of my DIR-655 router, but in the screen under the administrative tools menu there is nothing to use.
how do I update the firmware and bring up all the necessary tools?Dir-655 works because they are connected to the internet and manages the wireless network.
Cisco Wireless :: 4400 Any Built In Tools For Troubleshooting Bandwidth
Mar 2, 2012We have 2 Cisco 4400 series WLC and a whole bunch of 1231G APs connected to it.Sometimes the wireless network get really, really slow.Does Cisco have any built in tools for troubleshooting bandwidth or sluggishness issues?And how does one go ahead and troubleshoot something like that?
View 5 Replies View RelatedNo Connections Available - What Settings In Administrative Tools / Services Should Be Enabled
Aug 23, 2012My Dell laptop on my home network was connecting fine until I tried to figure out why it was booting and running so slowly and tinkered with the settings (per a web site with recommendations). Now it says no connections are available (there are, and other devices are fine). I tried all the simple solutions and have made any programs automatic that even vaguely look internet related and I still can't connect. The wireless adapter is enabled. I need to know what settings in the administrative tools/services should be enabled. The laptop is running Win 7 pro.
View 9 Replies View RelatedWhat Tools Are Available To Scan Network And Give More Information About Stranger's PC
Sep 12, 2011I'm running Windows 7 Pro. I noticed tonight when I clicked on Network in Windows Explorer that in addition to my home PCs there is a PC with someone's name on it. My suspicion is that my wireless ISP has screwed up in some way. I ran SoftPerfect's Network Scanner and don't see any strange IP addresses, so this stranger's PC is not on my subnet. What tools are available to scan my network and give me more info about the stranger's PC?
View 6 Replies View RelatedCisco Wireless :: WRV200 After Update Web Based Admin Tools Are Not Working
Aug 3, 2010After flashing the latest version of the firmware for the WRV200 (1.0.39) all of the pages on the web based admin tool are not working, and some are missing alltogether.I need to be able to re-flash the firmware to an earlier version (or attempt to re-flash this version) without using the web-based admin tool, as the page for doing the flash is one of the one's that is missing. Re-setting it doesn't work. I have tried searching here and through Google without any luck so far. The WRV200 works fine, but obviously is not locked down from a security standpoint, which is a large problem.
View 5 Replies View RelatedCisco VPN :: ASA 9.1 WebVPN VMWare VDI
Feb 28, 2013In Cisco ASDM 7.1(1), webvpn configuration, it is possible to configure bookmarks with "vdi://" links to Citrix's or Vmware's Virtual Desktop Infrastructures, but we couldn't find any configuration resource (conf guide) on official Cisco site: if it is actually possible to integrate Vmware View Client into ASA 9.1 WebVpn solution?
View 1 Replies View RelatedTP-Link 150Mbps Wireless :: WR702N Diagnostic Tools Not Working?
May 2, 2013Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Region : India
Model : TL-WR702N
Hardware Version : V1
Firmware Version : 4.18.114 Build 130314 Rel.39604n
ISP : BSNL
702N runs as repeater mode to W8968. In 702N > Maintenance > Diagnostic the ping work for Internal network but fail for external IPs. Most devices connected to 702 can access Internet fine. I have also tried Bridge and Client mode.
Ping to W8968
Code:
Pinging 10.0.0.1 with 64 bytes of data:
Reply from 10.0.0.1: bytes=64 time=1 TTL=64 seq=1
Ping to Internet
Code:
Pinging 8.8.8.8 with 64 bytes of data:
Request timed out.
Cisco Application :: Configuration Generated By Dynamic Tools For Nexus Bundle N5K-C5548UP-B-S32
Sep 26, 2011I found this reference DCNM-L-NXACCK9 in the configuration generated by a dynamic Tools for a nexus bundle N5K-C5548UP-B-S32. This reference is not reflected in the price list. Has it been replaced? no datasheet on Cisco portal.
View 2 Replies View RelatedCisco :: What Vmware Have To Use To Install Cucm 7
Apr 18, 2012What vmware i have to use to install cucm 7. vmware workstation 7 or vmware server or exsi 4 or 5. Any correct link to download and vmware config settings.
View 2 Replies View RelatedCisco Wireless :: License For WCS 7.0 On VMware?
Apr 24, 2012One of our clients is going to install WCS on a Vmware machine and uninstall it from the physical server. He wants to know if he can use the same license or get another one; since he will get a new Mac address with the new VmWare machine.
View 1 Replies View RelatedCisco :: ACS 5.4 Installation On Vmware Workstation
Jan 21, 2013is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies View RelatedCisco :: LMS 4.2 Appliance On VMware VSphere 4.0
Jul 31, 2012I'm currently trying to install the Cisco LMS 4.2 Appliance on a VMware vSphere 4.0 environment.I'm following the [URL]. I downloaded the Cisco_Prime_LAN_Management_Solution_4_2.iso and I started the server.I get this screen and I choose option 1:
View 3 Replies View RelatedCisco AAA/Identity/Nac :: Secure ACS 4.2 On VMware ESX 4.0?
May 10, 2010We need to move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS per Windows version 4.2.
View 10 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.4 VMWare Requirements
May 27, 2013I am reading up on the ACS VMware appliance installation instructions and am a bit confused on the disk space requirements. It says 60Gb is required and then goes on to talk about 500GB for the secondary instance. Do I need more than 60gb? Is the secondary instance a separate machine or part of the same one?URL
View 5 Replies View RelatedSetting Up Network In VMware?
Jun 8, 2011I am trying to set a little network in vmware (for do some testing on GP)in a vmware installed server2008 and win7 both are in one team Both has only one network adapter which is set to LAN1 Segment Both can ping each other Installed AD and configured DNS configured dhcp with scope 192.168.2.100 to 192.168.2.200 Set domain - [URL]Assign static to server 2008 192.168.2.101 Windows 7 can connect to domain no problem both machine got no external connectivity means cant open any webpage Do i need to add another network adapter in server2008 and set as NAT so it can connect to external network as well Can i set static IP address to 192.168.2.2 to server2008 or its has to be only within the loop basically need to setup a netwrok within a team that should be able to connect internally and externally as well ( Wont be able to connect to my host machine as need to set up VLAN for that but atleast access to internet) So wt type of vmware connection should i use
Host
NAt
LAN segment
or custom
And how many network adapter i need in each machine and which connect to which one?