Cisco :: LMS 4.2.2 Processes Started After Installing VMware Tools
Dec 10, 2012
Yesterday I had a installation of LMS4.2.2 who was working fine. I followed the procedure to install VMware Tools on the virtual appliance on this thread url...
Now I have a problem with the processes of LMS, but maybe it is not linked. I forget to do a snapshot before installing VMware Tools so I need to find a solution. A whole bunch of services do not start know. I tried to uninstall the VMware tools, to regenerate SSL certificate, I rebooted the server several times. It is running under VMware 5.1. [code]
I have just installed Cisco Prime LMS 4.1 from .ova file on a VMware architecture. My customer wants to know if the server is compatible with vmware tools.
Is there a way to allocate CPU or memory resources to specific processes - similar to a QoS-style configuration where you can prioritize the processes being handled by the CPU? We have a 2811 router whose CPU periodically spikes to 100% utilization. At these times, all of our EIGRP neighbor adjacencies bounce - either a peer goodbye is received or the hold time expires.
Our thinking is that we could possibly tell the router to prioritize the EIGRP process with the CPU so that routing is maintained, even though we realize other processes (like qos or ISAKMP for our tunnels) may suffer.
I am unable to kill EPMServer processes after shutting down LMS 4.2 on Solaris 10. There are still 60 or so EPMServer processes running. Killing them manually does not work as they appear to restart again after killing. Only way to knock them off is to reboot the system. Why does dmgtd stop not kill all LMS processes and is there a patch required for LMS 4.2 or Solaris 10 that would work?
There are some unknonw issues with ciscoworks LMS 3.2 on a solaris server. Many important processes like [code] and many others (around 40 processes were in shutdown state).When I try to start the processes from the Console window by "Managing processes" option, they still remain down with the same status.I tried to stop and then start the daemon manager, with the below commands: [code] After this, when I run command to check processes status (attached for your reference), I can still see those processes down.
I have a 2811 Router that is experiencing high CPU utilization. I have already issued the "show cpu proc" command, and everything seems to be fine (it's not a process issue) . According to our traffic graphs, we've seen that CPU is related to high link utilization, since we have 2 Fast Ethernet interfaces (Internet 4 MB and MPLS 6 MB), and when those interfaces have to deal with a lot of traffic at some hours, the CPU Load increases in the Router.
I found an article where they say that 2811 ISR Routers can deal with up to 61,44 Mbps (120.000 pps), but our router is far away from reaching that limit.It usually manages up to 16 MBPS. This router manages some services such as NAT traslation, ACLs, voice traslation profiles, policy routing (QoS), firewall and DHCP.
What can be happening to the router?.. Is it normal that when it has to process a lot of traffic, its cpu must increase up to 95%, even if it is handling just 16 MB compared to the theorical 61 MB? Is there any command or tool that I could use to troubleshoot this issue? Is there any limit in terms of WAN traffic that it could handle? How much influence do those services have over CPU Utilization?
Given these incidents, which router series could suit better in my network to avoid high CPU issues?
but when i configure the poller i believe the data i mixed up somehow. I for example i don't get all neighbor in the ospfNbrState. i tried with snmp context configuration but i am not sure if this right what i did.
I have a problem with ME-3600x running two ospf processes. Proc1 is WAN and PRoc2 is LAN. I am redistributing routes into both directions. After a WAN outage , certain wan routes did not get redistributed into the LAN process. I had to do a clear ip route to fix the problem. Has anynoe seen such a scenario with ME-3600x or any other switch/router
I am having a bit of trouble with my internet. Whenever I start up a video game like ArmA, CoD, BF3, GMod, ect. My internet crashes. I also ran game booster and it crashed my internet. [code]
Other than terminal software and MS visio. Just curious to see what else gets used a lot by other tradesman or see what else is out there.TFTP32D(Url) simple and easy tftp server for windows.
I am a network engineer at a company with more than 300 Cisco switches to monitor and maintain. Any recommendation on a monitoring software providing details such as network topology and links?
I have a medium enviroment with 2 x Cat4500 switches and 50 x Cat3650 plus few Cat3750 switches. I'm looking for a network mapping tool to map all the network equipment so I can easy to manage or trouble shoot the network. It doesn't matter if it's free or paid but something I can try first before buy.
what is a good way to remote assistance someone while texting them as well? I use TeamViewer and it works well except I'm on the phone with them as well. Looking for a remote assistance tool with texting as well.
I was using my computer, and it was fine. Then my Mom used it, and when I got it back, the Internet didn't work. The network connections page looked completely different. It looked like it converted to ancient networking software. There's this American Family Insurance (my mother used to work there) connection that I didn't even know was there. They want me to use dialup for a broadband connection. All the stuff is just dial up and so old I don't remember seeing that stuff anytime recently. How do I change my network connections page so it can use wifi (what this comp has)?
I have been in this field for a few years and I found this book, Network Performance Toolkit: Using Open Source Testing Tools, to be very useful. It is full of great open source testing tools and has easy to use instructions for them all.However, to be more specific, I am looking for a packet generator that can simulate network packets over an extended amount of time. So the end result is I have this generator test my physical network for an hour but it simulates a week of real network traffic. Any tool, ideally it be open source?
I would like a free tool that would moniter the internet usage of our network. it has about 20 computers and would like the following features: be able to show the usage of each computer the type of usage, ie, browsing, downloading, streaming a total usage Is there such a free program? would Microsoft Network Monitor 3.4 be able to do the trick if i learnt how to use it?
Today i has tryed to update the firmware of my DIR-655 router, but in the screen under the administrative tools menu there is nothing to use.
how do I update the firmware and bring up all the necessary tools?Dir-655 works because they are connected to the internet and manages the wireless network.
I am facing this issue with my LMS setup. the rmedbengine is not getting started. The CW was down due to low memory space . After restart the RMEDBEngine is not coming up(Made some free space avaiable in the drive) . I have done transaction log recovery. Wher i find the issue saying " database cannot be started - no error " for rme database. Attached the error SC.
I have a number of Catlyst 2750 switched as well as some wireless AIR-AP1131 access points that I would like to better manage. Some of the IOS are out of date, need to look at setting up VLAN's etc etc
I downloaded Cisco Network Assistant v 5.7(1) but when I do a network scan it just says every single device is Unsupported.I have a new 3750G-24PS sat here that I bought just before Christmas and I would like to configure it.
We have 2 Cisco 4400 series WLC and a whole bunch of 1231G APs connected to it.Sometimes the wireless network get really, really slow.Does Cisco have any built in tools for troubleshooting bandwidth or sluggishness issues?And how does one go ahead and troubleshoot something like that?
My Dell laptop on my home network was connecting fine until I tried to figure out why it was booting and running so slowly and tinkered with the settings (per a web site with recommendations). Now it says no connections are available (there are, and other devices are fine). I tried all the simple solutions and have made any programs automatic that even vaguely look internet related and I still can't connect. The wireless adapter is enabled. I need to know what settings in the administrative tools/services should be enabled. The laptop is running Win 7 pro.
I'm running Windows 7 Pro. I noticed tonight when I clicked on Network in Windows Explorer that in addition to my home PCs there is a PC with someone's name on it. My suspicion is that my wireless ISP has screwed up in some way. I ran SoftPerfect's Network Scanner and don't see any strange IP addresses, so this stranger's PC is not on my subnet. What tools are available to scan my network and give me more info about the stranger's PC?
We are running LMS 4.3.2, it was running OK... but now we receive the following message:
"User Tracking Major Acquisition cannot be started as Network Topology, Layer 2 Services and User Tracking are disabled."
All processes are running. System restart and re-install the 4.3.2 update does not fix it. I think this happens after a device update, maybe FaultManagementDeviceUpdate...
After flashing the latest version of the firmware for the WRV200 (1.0.39) all of the pages on the web based admin tool are not working, and some are missing alltogether.I need to be able to re-flash the firmware to an earlier version (or attempt to re-flash this version) without using the web-based admin tool, as the page for doing the flash is one of the one's that is missing. Re-setting it doesn't work. I have tried searching here and through Google without any luck so far. The WRV200 works fine, but obviously is not locked down from a security standpoint, which is a large problem.
In Cisco ASDM 7.1(1), webvpn configuration, it is possible to configure bookmarks with "vdi://" links to Citrix's or Vmware's Virtual Desktop Infrastructures, but we couldn't find any configuration resource (conf guide) on official Cisco site: if it is actually possible to integrate Vmware View Client into ASA 9.1 WebVpn solution?
Region : Argentina Model : TL-WR740N Hardware Version : V4 Firmware Version : ISP :
Region : India Model : TL-WR702N Hardware Version : V1 Firmware Version : 4.18.114 Build 130314 Rel.39604n ISP : BSNL
702N runs as repeater mode to W8968. In 702N > Maintenance > Diagnostic the ping work for Internal network but fail for external IPs. Most devices connected to 702 can access Internet fine. I have also tried Bridge and Client mode.
Ping to W8968 Code: Pinging 10.0.0.1 with 64 bytes of data: Reply from 10.0.0.1: bytes=64 time=1 TTL=64 seq=1 Ping to Internet
Code: Pinging 8.8.8.8 with 64 bytes of data: Request timed out.
