Cisco :: LMS 3.2 Unable To Start Important Processes Like CmfDbEngine
Jul 12, 2012
There are some unknonw issues with ciscoworks LMS 3.2 on a solaris server. Many important processes like [code] and many others (around 40 processes were in shutdown state).When I try to start the processes from the Console window by "Managing processes" option, they still remain down with the same status.I tried to stop and then start the daemon manager, with the below commands: [code] After this, when I run command to check processes status (attached for your reference), I can still see those processes down.
View 4 Replies
ADVERTISEMENT
Jan 7, 2013
I am having a bit of trouble with my internet. Whenever I start up a video game like ArmA, CoD, BF3, GMod, ect. My internet crashes. I also ran game booster and it crashed my internet. [code]
View 3 Replies
View Related
Mar 19, 2012
How do you enable Window XP RPC,Had W32Blaster.worm and cleaned system, however Internet will not load lack of RPC ,Message; no or low connectivity.
View 9 Replies
View Related
Aug 14, 2011
I recently upgraded Java to JRE version 1.7.0 and now when I try to login to the ASA 5510, I get the following message in the java console log.Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: sun.security.ssl.X509TrustManagerlmpl cannot be cast to com.sun.net.ssl.internal.ssl.X509ExtendedTrustManager at com.sun.deploy.security,X509ExtendedDeployTrustManager.<init>(Unknown Source)
View 5 Replies
View Related
Mar 11, 2013
Im having trouble with the topology service. Java is installed, but i cant start the topology service.
View 7 Replies
View Related
Mar 5, 2012
I've got a problem on 887VAMG router. It drops important connections. As customer wants to have a firewall I created ACL and ip inspect rules ,but the router drops their connections to cloud and some websites are not opening. So I removed ACL and most ip inspect rules just to test if it effects that. And left only ip inspect http urlfilter. But still they have those problems, so I'm really stuck how to configure that firewall. The below some dropping connection review:
%FW-6-DROP_PKT: Dropping tcp session due to RST inside current window with ip ident 13968 tcpflags 0x5014 seq.no 1629693318 ack 1687676045
000049: Mar 6 11:49:21.324: %FW-6-DROP_PKT: Dropping http session <ip>:1766 69.171.242.12:80 with ip ident 26247 tcpflags 0x5018 seq.no 264144210 ack 642133125
000050: Mar 6 11:50:00.774: %FW-6-DROP_PKT: Dropping http session <ip>:4708 69.171.242.12:80 with ip ident 2425 tcpflags 0x5018 seq.no 3819869211 ack 1862176018
000051: Mar 6 11:50:52.515: %FW-6-DROP_PKT: Dropping http session <ip>:2599 173.194.34.90:80 due to RST inside current window with ip ident 22909 tcpflags 0x5014 seq.no 899975979 ack 92642430
[code]....
View 1 Replies
View Related
May 2, 2012
If I am not able to start remote desktop services on windows 7 machine, will machine can be accessible by RDP?
View 1 Replies
View Related
Jan 12, 2011
I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup.Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC?
I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video.
With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware.
The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video).Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer.
I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma.Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration?
I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user.
View 1 Replies
View Related
Mar 7, 2012
I'm unable to connect to the internet because my Dell Wireless 1390 WLAN Mini-Card says that "This device cannot start. (Code 10)"
I have an Dell Inspiron 1520.
View 33 Replies
View Related
Aug 27, 2012
I am seeing an increasing number of processes on our Solaris based Ciscoworks server. The parent and the zombie processes are the following:
root@cw:/usr/ucb# ./ps -alxwww | grep 26915
0 101 14737 26915 0 0 0 0 Z 0:00 <defunct>
0 101 15986 26915 0 0 0 0 Z 0:00 <defunct>
0 101 16052 26915 0 0 0 0 Z 0:00 <defunct>
0 101 16065 26915 0 0 0 0 Z 0:00 <defunct>
0 101 16161 26915 0 0 0 0 Z 0:00 <defunct>
[code]....
This isn't the first time this happens, the last time I restarted the server and the problem disappeared for a while.
View 5 Replies
View Related
Apr 23, 2013
Is there a way to allocate CPU or memory resources to specific processes - similar to a QoS-style configuration where you can prioritize the processes being handled by the CPU? We have a 2811 router whose CPU periodically spikes to 100% utilization. At these times, all of our EIGRP neighbor adjacencies bounce - either a peer goodbye is received or the hold time expires.
Our thinking is that we could possibly tell the router to prioritize the EIGRP process with the CPU so that routing is maintained, even though we realize other processes (like qos or ISAKMP for our tunnels) may suffer.
View 2 Replies
View Related
May 16, 2012
I am unable to kill EPMServer processes after shutting down LMS 4.2 on Solaris 10. There are still 60 or so EPMServer processes running. Killing them manually does not work as they appear to restart again after killing. Only way to knock them off is to reboot the system. Why does dmgtd stop not kill all LMS processes and is there a patch required for LMS 4.2 or Solaris 10 that would work?
View 5 Replies
View Related
Sep 24, 2012
I have a 2811 Router that is experiencing high CPU utilization. I have already issued the "show cpu proc" command, and everything seems to be fine (it's not a process issue) . According to our traffic graphs, we've seen that CPU is related to high link utilization, since we have 2 Fast Ethernet interfaces (Internet 4 MB and MPLS 6 MB), and when those interfaces have to deal with a lot of traffic at some hours, the CPU Load increases in the Router.
I found an article where they say that 2811 ISR Routers can deal with up to 61,44 Mbps (120.000 pps), but our router is far away from reaching that limit.It usually manages up to 16 MBPS. This router manages some services such as NAT traslation, ACLs, voice traslation profiles, policy routing (QoS), firewall and DHCP.
What can be happening to the router?.. Is it normal that when it has to process a lot of traffic, its cpu must increase up to 95%, even if it is handling just 16 MB compared to the theorical 61 MB? Is there any command or tool that I could use to troubleshoot this issue? Is there any limit in terms of WAN traffic that it could handle? How much influence do those services have over CPU Utilization?
Given these incidents, which router series could suit better in my network to avoid high CPU issues?
View 11 Replies
View Related
Dec 10, 2012
Yesterday I had a installation of LMS4.2.2 who was working fine. I followed the procedure to install VMware Tools on the virtual appliance on this thread url...
Now I have a problem with the processes of LMS, but maybe it is not linked. I forget to do a snapshot before installing VMware Tools so I need to find a solution. A whole bunch of services do not start know. I tried to uninstall the VMware tools, to regenerate SSL certificate, I rebooted the server several times. It is running under VMware 5.1. [code]
View 5 Replies
View Related
Aug 7, 2011
i'd like to monitor the OSPF process of my MPLS routers by SNMP. I created templates for
ospfIfEvents
ospfNbrEvents
ospfSpfRuns
ospfNbrState
ospfAreaLsaCount
but when i configure the poller i believe the data i mixed up somehow. I for example i don't get all neighbor in the ospfNbrState. i tried with snmp context configuration but i am not sure if this right what i did.
View 1 Replies
View Related
May 30, 2012
I have a problem with ME-3600x running two ospf processes. Proc1 is WAN and PRoc2 is LAN. I am redistributing routes into both directions. After a WAN outage , certain wan routes did not get redistributed into the LAN process. I had to do a clear ip route to fix the problem. Has anynoe seen such a scenario with ME-3600x or any other switch/router
View 8 Replies
View Related
Jun 21, 2011
My WCS quit, apparently after the server was rebooted following Microsoft updates while I was on vacation earlier this week.
WCS 7.0.172
Win Server 2003 R2 on VMware
4BG RAM
<6GB of 50GB disk space used.
After stopping WCS & rebooting:Health Monitor is running with an error.WCS is stopped.Database server is stopped Apache server is running After attempting to restart/start WCS:Health Monitor is already running.This was a clean install/upgrade a few weeks ago. 7.0.172 wouldn't install on top of the previous version so I had to uninstall, install and restore. WCS had been solid ever since.
View 10 Replies
View Related
Jun 22, 2011
WCS fails to start with a Tomcat error , see below ;See launchout below - without re-installing WCS
Checking for Port 21 availability... OK
Checking for Port 8456 availability... OK
Checking for Port 8457 availability... OK
Checking for Port 1299 availability... OK
[code]....
View 8 Replies
View Related
Oct 26, 2011
LMS does not start, although the services seem to be started. Find attached the pdshow output and let me know what more you need me to send.
View 3 Replies
View Related
Mar 27, 2012
Today my colleague add 2 lines of access-list to our PIX 525. After 10 minutes, my firewall was rebooted and until now can't start. The booting process as listed below.
The questions are :
1. What is my OS version? Flash?
2. How to remove those 2 lines (reset the config to default)?
Booting process
================
Rebooting..þ
Wait.....
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
[code]....
View 1 Replies
View Related
Apr 24, 2012
I've two SG 200-50 and I need to use LACP? What should I do?
View 3 Replies
View Related
Dec 12, 2011
UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
View 1 Replies
View Related
Jan 1, 2011
We have LMS 3.2 Bundle that installed on Windows server 2003 OS. I was found that CTMJrmServer service doesn’t coming up. After searching on forum and trying some solved issues my problem still exist. Hostname of server was changed before with hostnamechange.pl script and it was integrated with ACS before but now it’s on Local login mode. Here is my Bundle Version:
1. Campus Manager 5.2.0
2. CiscoView 6.1.9
3. CiscoWorks Assistant 1.2.0
4. CiscoWorks Common Services 3.3.0
5. Device Fault Manager 3.2.0 08 Aug
6. Health and Utilization Monitor 1.2.0 08
7. Integration Utility 1.9.0 08
8. Internetwork Performance Monitor 4.2.0
9. LMS Portal 1.2.0 08
10. Resource Manager Essentials 4.3.0.
View 13 Replies
View Related
Feb 21, 2012
I boot my computer at my company and if I immediately try, I can connect to the internet with IE or Chrome'm on my company's network. A few minutes after computer start up, I can no longer connect to the internet (times out). However, if I then open VPN, connect to the company network and turn right around and close VPN I now can connect to the internet. I've queried my IT group and they get a 'Huh?' expression on their face
View 5 Replies
View Related
Mar 30, 2011
I had to reboot my laptop and reset my wireless. Now I cannot sign on unless I am on the desktop connected to the router. How do I start over and reconfigure. I have another desktop and a laptop that I need to have access for internet.
View 1 Replies
View Related
Jan 24, 2013
I disabled my Intel PWLA8391GT because i wanted to test the onboard network, was not happy with the onboard network so i tried to switch back by enabling the drivers... well it then had a little yellow triangle with a ! in the middle it then told me that it could not start... I then restarted my computer and when i started it was in the unknow as pci device i then installed the drivers manually and it ran into the problem again..
View 1 Replies
View Related
Mar 30, 2011
I just got a new server for hosting, installed Windows Server 2008 R1, and it installed correctly with no errors. First time running it, everything is plugged in, and there ethernet would not pick up at all. Went to Device Manager and got: "This Device Cannot Start. Code 10"Tried different cables, I even swapped the network switches (clearly wasn't the problem). More information can be supplied if needed.
View 3 Replies
View Related
Apr 28, 2012
Although, ACS states its installed, after going through the startup. However when I do show application nothing comes up. When I do a application start acs, %Application failed to start.
View 7 Replies
View Related
Nov 24, 2012
I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.The upgrade was successful, with no errors, and all services started. check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.I add the installation log file;And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.He added the logs generated by the LMS services Tomcat and Apache
View 4 Replies
View Related
Jul 4, 2012
I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be reconfiguring it and that is not something I am interested in doing! [code]
View 3 Replies
View Related
Feb 28, 2013
I write because my Cisco ASA 5505 doesn't start.When I connect power to the device, immediatly "Power" green Led turn on but "Status" Led is orange and not change.There is not data by Console cable.I try by another Power Supply but nothing.
View 1 Replies
View Related
Jan 23, 2012
A customer of my have a ASA5510 and want to use de Cisco VPN Client with the opties start before logon but I can find that option in the client. The computer is running on Windows 7. Does the option is still there or on with operating systems it is supported?
Also I tryed to configure it with the AnyConnect client but I can found how I simple need to configure it. I have installed on my computer the AnyConnect Client and the AnyConnect GINA but I don't seen also the option.
View 1 Replies
View Related
Feb 10, 2011
very time I start my laptop I have to start WZC.In my wireless network connections,I always have a broadcom 802.11g network adapter in the connect using box.Is there anyway to find out if this is working properly or use windows to connect for me?
View 4 Replies
View Related
