Unable To Start Remote Desktop Services On Windows 7 Machine?

May 2, 2012

If I am not able to start remote desktop services on windows 7 machine, will machine can be accessible by RDP?

View 1 Replies


ADVERTISEMENT

Can't Remote Desktop In From IMac Into Windows Machine

Feb 9, 2012

I have a Win 7 machine with Win SBS 2011 in my office and an iMac. The Win machine is being setup for Exchange 2010. My problem is this: I can't Remote Desktop in from my iMac into the Win machine, but CAN when outside the network.The Win7 machine has a static IP, the iMac a dynamic. When I access the internal part of my router I can only see my iMac. I get a "can't connect to win-based machine" error when I try to Remote Connect.The only thing I can think is that using the same gateway is somehow messing things up? I've had two techs try to figure this out and they're both stumped.I was maybe thinking that since both comps are going out the same gateway that I should try anc configure the iMac to try and RDC on a different port, since maybe the iMac is listening on 3389 and sending the RDC back to itself?

View 4 Replies View Related

Workstation Services Won't Start Windows 7?

Feb 18, 2013

a workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.

View 2 Replies View Related

Remote Desktop Services On Server 2012

Sep 19, 2012

I just installed Server 2012 Standard on a trial. I would like to play around with Remote Desktop Services formerly called Terminal Services. I have no clue on where to start but I have installed the RDS roles.

View 7 Replies View Related

Remote Desktop To Virtual Machine

Feb 7, 2012

I have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine

View 5 Replies View Related

Cisco AAA/Identity/Nac :: 2960 - Remote Desktop To Machine 802.1x Authenticated By User (Wired

Jan 22, 2012

802.1x is working properly, 802.1x port is up,but;when I do a remote desktop to machine that is 802.1x authenticated by an user(Wired), first, login to pc successfuly  then(3 minutes) is switch port down..
 
Debug radius authentication
Debug aaa authentication
 
Does not appear in the log only message port is down
 
Equipment;
 
Cisco 2960, Cisco ACS 4.2 ,MS Active Directory Authentication
 Client:windows xp, windows 7
 Cisco 2960 Port Config
 switchport mode access
dot1x pae authenticator
dot1x port-control auto
spanning-tree portfast
spanning-tree guard loop

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Replace XP Machine With Wired Desktop Running Windows 7

Apr 28, 2010

I have a Linksys WRT54G router; have a cable internet connection through the router; and two wired desktops, one running Vista (32-bit) and the other XP. I would like to replace the XP machine with a wired desktop running Windows 7 (64-bit).

View 8 Replies View Related

Unable To Ping Windows 7 Machine On LAN?

Feb 28, 2011

This is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.

View 19 Replies View Related

Cisco :: LMS 3.2 Services Do Not Start

Oct 26, 2011

LMS does not start, although the services seem to be started. Find attached the pdshow output and let me know what more you need me to send.

View 3 Replies View Related

Cisco :: LMS 4.1 - Not Working After Reboot / Services Don't Start Correctly

Aug 30, 2012

We have LMS 4.1 - it was working perfectly for some time - it was rebooted and now the services don't start correctly. I manually started most of the services but the Daemon service will not start.
 
The main page comes up and after I log in - all the sections list an error
 
'License Server / Deamon Manager  is down. Please check license.log for more information'.

View 3 Replies View Related

Unable To Ping Or Connect To Remote Desktop On Xp Pro Sp3

Jun 11, 2011

I have two computers side by side 192.168.1.7 and 192.168.1.8 both running xp pro sp3. On 8 I can RDC to the 7, but on 7 I cannot RDC to 8. I can see port 3389 listening on both using netstat -a. But 7 just can't RDC connect to 8. 7 cannot ping 8 either. I have the firewall turned off on 8, I had tried allowing RDC 3389 earlier with the firewall but that didn't work either.I don't have any extra firewalls running.Life will be like perfect, if I can just RDC to 8.Both are on the same wired belkin wireless router, 4' from itl.I tried taking the no ping no rdc computer to work and it didn't work there either.

View 19 Replies View Related

Remote Desktop Connection Between Windows 7 And XP?

Dec 5, 2012

I want to setup Remote desktop connection between PC's running win 7 and win xp so that i can access win xp machine through win 7. Both are connected through LAN connection.

View 2 Replies View Related

D-Link DIR-825 :: Remote Desktop In Windows 7?

Nov 15, 2009

configure this router to allow connections from the internet for remote desktop?  I can do it on my lan, but the Dir-825 blocks this feature.  Yes, I set up port 3389 as a virtual server to the computer I wish to use. 

View 6 Replies View Related

Cisco Firewall :: ASA5505 - Windows 7 Machine Unable To Load Images For A Website

Dec 20, 2011

Ths only hapeens at one location. All the other locations are working the difference is this location goes through the firewall. If I bypass the firewall at this location it works.

View 1 Replies View Related

Free Remote Desktop Software For Windows 7?

Apr 12, 2013

Boss has asked me to find a "free" Remote Desktop App, to monitor, access and audit over 200 workstations

View 6 Replies View Related

Allow Remote Desktop Connections In Windows Server 2008?

May 10, 2011

Is there any way to allow multiple computers to connect to the same remote computer and work simultaneously?

View 3 Replies View Related

Cisco Routers :: WRSV4400N / Remote Desktop Through Windows VPN?

Mar 24, 2013

We have a WRSV4400N installed as our primary NAT Firewall.  It is configured to allow Windows VPN connections to our server residing on the Internal Network Domain - this works fine.Problem is that even though the remote VPN client can open shares, browse the internal network, and resolve computer names fine with DNS,  but... Remote Desktop will not connect using the VPN tunnel.We need this to work... I spent several hours with your support people when installing this router a year ago and got nowhere.  And everythung else works fine.I am using Windows server-based VPN because your VPN Clint didn't work ata ll either. Can you perhaps give me a list of configuration settings to check?

View 3 Replies View Related

D-Link DIR-655 :: Utilize RDP (Windows Remote Desktop) Between Two Points

Jun 10, 2013

I recently purchased (2) DIR-655 routers; one for home and one for the office. Both are connected to the 'net through CenturyLink DSL via a Zyxel 660 modem.I am switching from a Cisco/Linksys WRT54G home and a Trendnet TEW432BRP at the office. I wanted to get up to N and consolidate to a single hardware type. The 655 came highly recommended, and the price was right at $75.My goal is to utilize RDP (Windows Remote Desktop) between the two points and from other points inbound to either 655. The first hurdle was that the Xyxel modem, by default, blocks just about everything inbound with no hope of opening the ports. The only viable solution was to bridge the modem and allow the 655 to act as DHCP. Done. The modem now should not even have its own IP address, and should completely bypass all of the built-in firewalls, etc. As soon as I went into bridged and forwarded the ports in the router we were in business (though I still can't seem to log in to RDP, the ports are verified open).

View 6 Replies View Related

Cisco VPN :: ASA5510 - Windows 7 Connects To It But Not Remote Desktop

Mar 15, 2010

we just got several laptops that came with Windows 7 Pro 32bit installed, and we have installed the VPN Client 5.0.06.0110.  The VPN client appears to connect to our ASA5510, but we are unable to connect to any machines on our network as it does on our XP machines. 

Furthermore, we cannot ping any as well.  Also, while connected the Windows 7 machine is still able to access internet site as if split-tunneling was configured, which its not!  I've seen alot of people posting on the internet about the same issue, but I have not run into any resolutions that work.

View 14 Replies View Related

Cisco Routers :: Windows RDP Remote Desktop Not Working With WRVS4400N

Nov 16, 2010

I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?

View 6 Replies View Related

Severe % Dropped Packets On XP Machine When Windows 7 Machine On Network Not Switch

Aug 2, 2011

I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]

View 8 Replies View Related

Installed Network Printer On Windows 7 Machine / Now XP Machine Won't Print To It

Jul 20, 2011

New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.

View 11 Replies View Related

Dell :: N7110 WIDI / Unable To Send Desktop To Remote Display (Netgear PTV 2000)

Jan 16, 2012

i purchased a Dell N7110 from Dell last week, and a few days later I purchased a NETGEAR PTV2000 wireless display adapter. It was my understanding the N7110 would support the PTV2000; my N7110 specs are below.Originally, I downloaded the required software (Intel WIDI) and drivers from the Intel website.

The laptop and PTV2000 adapter seemed to start fine in that the security code was given on my TV screen and I was able to enter it in the Intel WIDI software. Next step was to select "connect" to the adapter. The connection was initialized, as the green light on the PTV2000 was flashing and my TV screen said "connecting", then "connected". At the moment it said "connected", my laptop screen immediately flashed black, then restored itself approx one second later with the graphics on the laptop screen larger (larger icons) than normal. Approximately one second after this occurred, the connection was lost and the Intel software stated the following error: "unable to send desktop to wireless display, try restarting the application. If the problem persists, try re-installing the Intel WIDI software".

I retried the software numerous times with same results. I uninstalled then re-installed the Intel WIDI software and drivers with the same results. I also uninstalled and re-installed the software, but got them from the Netgear website, and then later from the Dell website (all had Intel WIDI software to download), which all ended in the same results (original problem still exists).After countless tries of running Intel WIDI, the program would on rare occasions, lock up and become unresponsive, while the green light on the adapter was still flashing (connection being made) and the TV message said "connected". The screen never changed from "connect", the desktop image never appeared on the TV, and I would have to use task manager to shut the program down.

Netgear and Intel websites do not address this issue, other than saying "try uninstalling then reinstalling the software", which I did countless times. Web searches hint the real problem is in the Graphics drivers on the Dell - I did find a thread on this site (Dell site) complaining the PTV2000 would not play DVDs or Blueray, and the person changed the Graphics driver, but now cannot get Windows to boot - I believe the Dell techs are currently mailing him software to correct this problem. Because of this, I am very reluctant to change the Graphics drivers as I do not want to cause the same issue on my machine...I have not had any problems with the wifi side of things, in that I am always able to initialize a "connect" without issues, and it tries to connect but just never completely does... tell me if the original problem I stated above can be corrected, and the steps I need to take, or should I return the PTV2000 and forget the whole wireless display idea?

Side Note: I can provide the exact softeware and driver links I used if required, but didn't as there really wasn't much choice - The Intel site, Netgear site, and DELL site all provided short instructions and only one download option; Win 7 32 or Win 7 64. I used Win 7 64 option.

Quantity
Parts #
Part Description
1
62GY1
Base, Notebook, BTS, FCG06, DELL AMERICAS ORGANIZATION..., N7110

[code]....

View 1 Replies View Related

Linksys Wireless Router :: E4200 Blocking Windows Remote Desktop Connection?

Mar 7, 2012

I just picked up the E4200 to replace a router, I can remote desktop into a computer that is physically connected to this router, but cannot remote desktop into other computers on the network that are connected via another switch.

View 1 Replies View Related

TP-Link 150Mbps Wireless :: WR740N - Unable To Connect Remote Desktop And Do File / Printer Sharing

Feb 19, 2013

Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL

I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.

View 4 Replies View Related

HP Desktop Running Windows 7 Unable To Connect To Internet?

Dec 13, 2012

in connecting my Hp Desktop to the internet. The PC is connected to my home network and I am able to download my email, I am able to print from the PC to my wireless pronter over the home network. All other PCs and devices in the hosue connect no problem.I have tried numerous solutions but still unable to resolve. I tried to hard wire it to the network, but I get Local access only. I am using Windows 7 operating system. I am connected to a netgear router.

View 8 Replies View Related

Windows 7 / Unable To Connect To Desktop - Other Devices Working

Aug 21, 2012

I'm running Windows 7 on my desktop, and I've had problems since yesterday with my pc. My Vista notebook, ipad3, ipod touch, android based phone and blackberry are all able to connect to the wifi, but my desktop is unable to connect to the wifi or ethernet. Things were working fine until yesterday, when I had to power cycle, after which the desktop connection stopped, though other devices are working fine. My ipconfig details are as follows:

Windows IP Configuration Host Name . . . . . . . . . . . . : DELL-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : reliancebroadband.co.in

[code]...

View 2 Replies View Related

Windows 7 Machine Does Not Detect Win Xp Machine

Apr 29, 2012

I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.

View 12 Replies View Related

Acer Aspire X3950 Desktop Windows 7 Unable To Connect Wifi Adapter

Mar 26, 2013

I have an Acer Aspire X3950 desktop, I am running Win7 and have tried two different wifi adapters and they install but they will not connect. It is almost as if my computer itself is blocking the adapter.I spoke to an On Networks rep for over two hours and he tried everything from reinstalling to rebooting and tried three different drivers. He was from a different country and when I told him what the troubleshooter said he would not deviate from the script they give them 2 hours and he was not even close. It saw the device but it wouldn't even blink.Acers website nor customer service will assist me because my warranty is expired. They want me to send the computer back but I have a feeling it is an easy fix I just don't know enough about computers to say oh just uncheckmark this box.I know in the past I used wifi but switched to an ethernet cable.

View 1 Replies View Related

Allow Remote Start / Stop Off Applications?

Nov 28, 2011

I would like to allow another user to access my home server to be able to restart his teamspeak/ mine craft servers. I know game hosting companies can do it and would like to know how I can have him be able to restart them without remote desktop.

View 2 Replies View Related

D-Link DIR-825 :: Setting Up FTP Services For Remote Access To NAS?

Oct 4, 2011

i have a WD My Book Live and it's connected to my DIR-825. i'd like to configure the router to allow FTP access to the NAS from the internet. the drive has an option to enable FTP in it's configuration, but i have not done this before and i don't know what to do to create a solid/secure FTP portal so that i can access my files remotely.how do i configure the router for this ? my router is set to DHCP and i have turned MAC filtering on.. in particular i am looking for the ability to transfer/copy files from the drive, and not allow any modification/writing to the drive from the outside.

View 10 Replies View Related

Wireless :: Remote Desktop Can't Connect To Remote Connection

Mar 9, 2011

On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.

View 1 Replies View Related

Connect Remote Machine Using Modem

Jan 31, 2012

I have to connect client machine using Modem. They Have their Telephone number and they are saying that by dialing that number I have to connect their machine using that number from modem. How can I do this and which hardware, software I need i.e requirement of things to do this

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved