Wireless :: Remote Desktop Can't Connect To Remote Connection
Mar 9, 2011
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : 1.0 ISP :
I recently bought this modem for use at home. When I try to log in to my computer at work I am able to log in to the server via a VPN connection but not onto individual computers via Remote Desktop Connection. Both computers run windows 7.
I just picked up the E4200 to replace a router, I can remote desktop into a computer that is physically connected to this router, but cannot remote desktop into other computers on the network that are connected via another switch.
To use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful
I opened a computer in other network via remote desktop(because I forwarded port in router)....and tried to access other computers in the network via remote desktop again from that computer but after I done, I don't know how to close the secondary remote desktop. There was one close button on the top, but if "close" it, whole rdp connection was closed. The secondary rdp connection is still open in the computer.
I am having trouble connecting to my home computer from my work computer via the Windows Remote Desktop Connection app.On my home computer (win 7 pro) I have:
1. Allowed incoming remote desktop connections
2. Verified that the firewall is open for RDC
3. Forwarded port 3389 on my router to my devices static IP
4.Verified that I am using the correct IP (Router has a dynamic IP but I called home and had my wife read the current IP # from whatismyip.com)
5. Setup an account on the home computer that is password protected
I am connecting from a win XP pro computer.I receive 0% packet loss with reasonable time delay when pinging my home IP from the work computer.I also asked a family member to try from a different location (using Vista Ultimate) with the same result Error is that connection is never established and I am never prompted to logon to the home computer.I can connect via RDC when on the home network.
I have a problem connecting to VPS with Windows XP Remote Desktop Connection.The error I'm getting is:"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, router...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work.I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.Are there any settings that need to be changed in Windows XP for RDC to work?
I am running a virtual machine with 6 GB of ram with OS Windows 7 64 bit.I turned on remote desktop connection made sure firewall is off and even enabled ISS.But I cant connect to it from my main PC or any other PC.Is it because I have the same IP on the VM? Because I want to sell these VM's as dedicated servers but it wont work.
A user is trying to remote to her desktop with a small Dell Latitude netbook through remote desktop connection via a work VPN. Both her laptop and her desktop have working sound; however, when connected to her desktop through her laptop, no sound can be heard. It says there there are no audio devices detected. Obviously the drivers are installed on the desktop.
Is it possible to find out the IP address of a PC connecting via Remote Desktop Connection.Running XP Pro on a network,I have admin rights to the PC's, but no direct access to the servers.Event viewer shows some details, but no IP address.
"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, outer...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work. All I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.
Actually i was having an windows 2003 server with an public ip at my office... i had hosted a new site into that server ( iis ) in order to open the site it needs a vpn connection to read database remotely! now the problem here is after giving vpn connection i was unable to connect to the server through remote desktop from my home! if i need to connect to the server i need to setup the vpn connection at home also.. so is there any solution on how to connect to remote desktop even if vpn is connected.!
I have to access Remote Desktop Connection for a new job that I was supposed to start today (work from home).When I go to log in it brings up the computer's old name and won't let me access without a password.I'm working off my husband's pc & he can't remember ever using a password on it.About a year ago I reconfigured the pc and reset it's name and administrator but there were never any passwords involved.
Actually i was having an windows 2003 server with an public ip at my office... i had hosted a new site into that servers ( iis )in order to open the site it needs a vpn connection to read database! now the problem here is after giving vpn connection i was unable to connect to the server through remote desktop from my home!! if i need to connect to the server i need to setup the vpn connection at home also. so is there any solution how to connect to remote desktop even if vpn is connected!
We use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.
I am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).
And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.
Remote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.
I am having problem connecting to my work PC via VPN Cant ping and RDP. I sometimes need to log into my work PC to check out a problem. I connect via VPN and I can access servers (using Citrix and local intranet sites) that can only be accessed once connected to my work domain. So it looks like the VPN actually works fine.
But I cannot Remote Desktop Connection to it. I also tried to ping the PC using a command prompt. Using the command prompt, I ping MyWorkPC And I can see that it tries to ping MyWorkPC.domain.name.co.za. So it looks like it sees the MyWorkPC on the network. But all pings fail.
A work colleague tried to remote connects to MyWorkPC from his home PC and he can successfully connect. So I do believe that the work network and PC is setup correctly. I am running window 7 Ultimate SP1 (32bit) with a 3G dongle in a router. I also have Avast antivirus installed on my PC. I was not sure if the router or the antivirus was the issue so I tried:
1.Removing the 3G dongle and attach it to my USB port on my home PC directly. No luck 2.Some blogs said that the P2P or IM shield on Avast might be the problem so I disable it. No luck 3.Then I uninstalled Avast completely to see if it has any shield that might still block it. I restarted. No luck
I am attempting to set up a remote desktop connection to my home media server so I no longer need to keep a keyboard, mouse, and monitor plugged in to it when I need to use it. I am running Windows 7 Home Premium on both systems. I am sure the firewall is not the problem, as I have tried to connect with it disabled. I have also made sure to allow remote connections on the server. I know the DIR-825 supports UPnP, which works with Remote Desktop, so there should be no problem, but something is not working. I have tried disabling UPnP, setting up a virtual server, port forwarding, and assigning a permanant IP to the server, to no effect. Something is blocking my remote connection requests. Keep in mind, I am not even trying to do this over the internet, just over my LAN!
I want to connect via windows rdp to computer outside the company office and I cannot do that since we have webwasher or proxy installed in the office.I can access this machine with IE (it is a server with open port 80) and I see its website. This is becuase the IE at office has proxy configured correctly.I cannot access the same machine with RDP connection, though. I can access it using other computer outsite the office, so it is not an issue that rdp is not enabled or so. Problem is with proxy at office.I need a way to connect to rdp by using the same proxy.Problem is that that IE at office uses automated proxy script (.pac).I have installed remote utilities server on the machine I want to access and the remote utilities viewer on the computer at office. I set the proxy similary to what is set in IE but I cannot connect anyway. I can connect this way from third computer outside the office though, so the configuration is fine, only proxy is the problem.I managed to get the proxy details like host name and port but I'm not sure those are the right one.The webwasher or proxy is mcafee web gateway 6.8.4.
I have a question on a VPN connection. I have a remote access VPN setup on an ASA 5505 to be able to remote into a location and check the HVAC program running on a PC. The remote connection connects fine, but when I use remote desktop to connect to the PC, it connects quick, but the screen redraw and reaction time is extremely slow. EG: I click on the program and it takes about 20 seconds to draw the screen, or I click on a menu bar and get the same times for reactions. Could this be a ISP Up/Download issue or is there something that I need to look at on the ASA to change?
If I connect to the remote and do a PING from my desktop to the remote Desktop, these are the results that I get:
Reply from 192.168.XX.XX: bytes=32 time=96ms TTL=128 Reply from 192.168.XX.XX: bytes=32 time=132ms TTL=128 Reply from 192.168.XX.XX: bytes=32 time=90ms TTL=128
I have ASA 5515x and it has already Internet Connection since my firewall is not "production". So right now I'm trying to configure a Remote Session just for a test and eventually I was not able to connect from it. I followed the instructions from technotes but still Remote Connection dropped. Here's my sample configuration on my firewall, btw I also configured a service policy rule and ACL just to make sure if I can able to access the Server inside my network but Session also dropped.
Region : India Model : TL-WR740N Hardware Version : V4 Firmware Version : 3.12.11 Build 120320 Rel.51047n ISP : BSNL
I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.
I have a PC that runs cameras covering the access to my house ( due to an earlier incident where someone thought my stuff would look better at their place ). It has been running fine with XP and a VIA C3 box for years, but the mobo died and so my woe begins...I have slapped together a D510 box with W7 32 Enterprise, but cannot get it to network properly. ATM it is propped on my dining table with Cat5 threatening to trip someone up, so I'm not really the flavour of the month in the house.
Regular file sharing ( looking at docs, pics, etc. ) is not a problem between the house PC and the CCTV box ( bidirectional ). The old CCTV box was controlled remotely using VNC with great success, and I was hoping to continue in the same vein. Unfortunately VNC cannot connect from the house box to the CCTV box, but will work the other way when initiated from the CCTV box, not very practical. UVNC will not work in either direction and will not loop back to itself, and Remote Desktop does not work either. Error messages are "server running as application" for UVNC and server unavailable ( words to that effect ) in VNC. Remote Desktop just times out. Firewalls on both machines have been off and on during testing with no apparent change. There is a Netcomm ADSL2 4 port modem that ties them together.
It should work, it did work, so I know it can work, but networks are not my strong suit so I am throwing it out for input here. I have been banging my head on this particular rock for about 10 hours and half a bottle of bourbon and it is 00:49 local time, so forgive me if I have failed to include the crucial nugget of information that will unravel this mess.Where should I start, or is there a no-fuss remote control software option for Windows 7 that I need instead?
I have two computers side by side 192.168.1.7 and 192.168.1.8 both running xp pro sp3. On 8 I can RDC to the 7, but on 7 I cannot RDC to 8. I can see port 3389 listening on both using netstat -a. But 7 just can't RDC connect to 8. 7 cannot ping 8 either. I have the firewall turned off on 8, I had tried allowing RDC 3389 earlier with the firewall but that didn't work either.I don't have any extra firewalls running.Life will be like perfect, if I can just RDC to 8.Both are on the same wired belkin wireless router, 4' from itl.I tried taking the no ping no rdc computer to work and it didn't work there either.
I successfully connected to my windows xp pc through the remote desktop connection client on my macbook and now I am unable to connect to the internet on the pc. All that it says is acquiring network address. I know that it is not an isp or router issue because all of the other computers on the network are able to connect just fine. I tried using system restore but it said something to the effect of windows can not restore to this point, no changes were made to your computer. This happened with multiple different restore points.