Servers :: Remote Desktop Can't Connect?

Aug 23, 2011

Remote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.

View 1 Replies


ADVERTISEMENT

Servers :: No Remote Desktop Access?

May 19, 2011

The other computer running XP connects to the server through remote access but the one running windows 7 does not

View 1 Replies View Related

Servers :: Remote Desktop Connection Has Timed Out?

Dec 17, 2011

"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, outer...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work. All I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.

View 1 Replies View Related

Servers :: How To Remove Remote Desktop Connection

Jun 1, 2011

how to uninstal remote desktop connection, computers are networked

View 1 Replies View Related

Wireless :: Remote Desktop Can't Connect To Remote Connection

Mar 9, 2011

On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.

View 1 Replies View Related

Servers :: Connect Remote PCs Through A Router?

Jan 4, 2011

I'm relatively competent with adding new hardware to an existing network but I am not sure how to do something a little more complicated. I have a small business server that hosts 6 computers via wired network. We run a cable from the main office across the lot to the shop where it connects to a wireless enabled router. The router is wired to two more PCs and hosts 1 laptop wirelessly. I would like to two PCs to be able to connect to the server and access all the common files stored in the server drive - how do I get the PCs to see the server and not just the router/each other? I don't need the laptop to connect to the server, but we do need to wireless router to connect the laptop to the internet.

View 1 Replies View Related

Connect To VPN On Remote System With Desktop?

Jan 15, 2012

We use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.

View 3 Replies View Related

Remote Desktop Cannot Connect To Computer

Jun 5, 2011

I am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).

And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.

View 4 Replies View Related

Cannot Ping / Remote Desktop Connect Via VPN

Sep 9, 2012

I am having problem connecting to my work PC via VPN Cant ping and RDP. I sometimes need to log into my work PC to check out a problem. I connect via VPN and I can access servers (using Citrix and local intranet sites) that can only be accessed once connected to my work domain. So it looks like the VPN actually works fine.

But I cannot Remote Desktop Connection to it. I also tried to ping the PC using a command prompt. Using the command prompt, I ping MyWorkPC And I can see that it tries to ping MyWorkPC.domain.name.co.za. So it looks like it sees the MyWorkPC on the network. But all pings fail.

A work colleague tried to remote connects to MyWorkPC from his home PC and he can successfully connect. So I do believe that the work network and PC is setup correctly. I am running window 7 Ultimate SP1 (32bit) with a 3G dongle in a router. I also have Avast antivirus installed on my PC. I was not sure if the router or the antivirus was the issue so I tried:

1.Removing the 3G dongle and attach it to my USB port on my home PC directly. No luck
2.Some blogs said that the P2P or IM shield on Avast might be the problem so I disable it. No luck
3.Then I uninstalled Avast completely to see if it has any shield that might still block it. I restarted. No luck

View 2 Replies View Related

D-Link DIR-825 :: Remote Desktop Will Not Connect Via It Over LAN

Jan 10, 2012

I am attempting to set up a remote desktop connection to my home media server so I no longer need to keep a keyboard, mouse, and monitor plugged in to it when I need to use it.  I am running Windows 7 Home Premium on both systems.  I am sure the firewall is not the problem, as I have tried to connect with it disabled.  I have also made sure to allow remote connections on the server.  I know the DIR-825 supports UPnP, which works with Remote Desktop, so there should be no problem, but something is not working.  I have tried disabling UPnP, setting up a virtual server, port forwarding, and assigning a permanant IP to the server, to no effect.  Something is blocking my remote connection requests.  Keep in mind, I am not even trying to do this over the internet, just over my LAN! 

View 4 Replies View Related

D-Link DIR-655 :: Cannot Connect Using Remote Desktop Connect From External PC

Jun 16, 2011

I'm trying to connect to my home laptop from work.  The home laptop is connected to DIR-655 router.  I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop".  From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too.  All computers are running Windows 7 Home Premium Remote Access is enable on all.

View 1 Replies View Related

Can't Connect To CCTV Box Via VNC - UVNC Or Remote Desktop?

Aug 22, 2011

I have a PC that runs cameras covering the access to my house ( due to an earlier incident where someone thought my stuff would look better at their place ). It has been running fine with XP and a VIA C3 box for years, but the mobo died and so my woe begins...I have slapped together a D510 box with W7 32 Enterprise, but cannot get it to network properly. ATM it is propped on my dining table with Cat5 threatening to trip someone up, so I'm not really the flavour of the month in the house.

Regular file sharing ( looking at docs, pics, etc. ) is not a problem between the house PC and the CCTV box ( bidirectional ). The old CCTV box was controlled remotely using VNC with great success, and I was hoping to continue in the same vein. Unfortunately VNC cannot connect from the house box to the CCTV box, but will work the other way when initiated from the CCTV box, not very practical. UVNC will not work in either direction and will not loop back to itself, and Remote Desktop does not work either. Error messages are "server running as application" for UVNC and server unavailable ( words to that effect ) in VNC. Remote Desktop just times out. Firewalls on both machines have been off and on during testing with no apparent change. There is a Netcomm ADSL2 4 port modem that ties them together.

It should work, it did work, so I know it can work, but networks are not my strong suit so I am throwing it out for input here. I have been banging my head on this particular rock for about 10 hours and half a bottle of bourbon and it is 00:49 local time, so forgive me if I have failed to include the crucial nugget of information that will unravel this mess.Where should I start, or is there a no-fuss remote control software option for Windows 7 that I need instead?

View 5 Replies View Related

Unable To Ping Or Connect To Remote Desktop On Xp Pro Sp3

Jun 11, 2011

I have two computers side by side 192.168.1.7 and 192.168.1.8 both running xp pro sp3. On 8 I can RDC to the 7, but on 7 I cannot RDC to 8. I can see port 3389 listening on both using netstat -a. But 7 just can't RDC connect to 8. 7 cannot ping 8 either. I have the firewall turned off on 8, I had tried allowing RDC 3389 earlier with the firewall but that didn't work either.I don't have any extra firewalls running.Life will be like perfect, if I can just RDC to 8.Both are on the same wired belkin wireless router, 4' from itl.I tried taking the no ping no rdc computer to work and it didn't work there either.

View 19 Replies View Related

Can't Connect To Internet After Connecting To Remote Desktop

Aug 23, 2011

I successfully connected to my windows xp pc through the remote desktop connection client on my macbook and now I am unable to connect to the internet on the pc. All that it says is acquiring network address. I know that it is not an isp or router issue because all of the other computers on the network are able to connect just fine. I tried using system restore but it said something to the effect of windows can not restore to this point, no changes were made to your computer. This happened with multiple different restore points.

View 2 Replies View Related

Connect To Remote Desktop Through VPN From Public Network?

Sep 7, 2011

I have a user that is in a hotel with a Windows 7 laptop. He is connected to the hotel's public network and it is set as a public network in windows network and sharing center.Usually from home, which is a private network, he can log onto our VPN and then use Remote Desktop to control his work computer (which is Windows XP) here at the office; however, from this hotel, he can still connect to the VPN and access shared drives and all, but he cannot connect to any computer using remote desktop.I've tried everything, allowing remote connections for public in the firewall, even changed the network from public to private and he still cannot connect. Still, he can connect just fine from home.

View 1 Replies View Related

Configure System To Connect To Remote Desktop Connection?

Nov 5, 2011

I want to know how to configure my system to connect to Remote Desktop Connection?

View 1 Replies View Related

Cisco VPN :: ASA 5520 - Cannot Ping Or Remote Desktop Connect To Any Client

Apr 18, 2013

I have a need to Remote Desktop connect to company’s employees for support then they are abroad and using Cisco AnyConnect client.Cisco AnyConnect client connection works fine, clients can reach company’s inside network without problems, but I cannot make revers connection, I cannot Remote Desktop connect or ping VPN clients from companies inside network. I cannot ping clients from ASA too.I am using ASA 5520, Cisco Adaptive Security Appliance Software Version 8.4(3) Device Manager Version 6.4(7), and Cisco AnyConnect VPN Client 2.2.0133. Protocol Encryption- AnyConnect-Parent SSL – Tunnel DTLS-RC4 RC4 AES 128.

View 0 Replies View Related

Cisco Routers :: RV220W Upgrade To 1.0.4.17 - Now Remote Desktop Won't Connect

Sep 16, 2012

Or rather, it will connect within the first few minutes after a router reboot, but eventually is kept from connecting.
 
All settings look good. Upgraded from 1.0.3.5.  Prior to upgrade, this was not  problem.

View 3 Replies View Related

TP-Link 150Mbps Wireless :: WR740N - Unable To Connect Remote Desktop And Do File / Printer Sharing

Feb 19, 2013

Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL

I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.

View 4 Replies View Related

Servers :: 2003 Show Icons On Desktop Windows 7?

Jul 27, 2011

I use server 2003 in my netwerk now I change the users computer from XP to windows 7, how can i set the icons on the users desktop in windows 7.

View 1 Replies View Related

Servers :: Connect 5 Servers Together To Create A Private Network?

Apr 16, 2011

i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..

View 16 Replies View Related

Servers :: Formatted Dell 8300 Desktop But Now Cannot Hook Up To The Internet?

Jan 7, 2011

I formatted my dell 8300 desktop but now I cannot hook up to the internet, there is no local area connection icon. Not sure what I did wrong or what to do to be able to install.

View 2 Replies View Related

Servers :: ISA Server 2000 Networking - Connecting Ubuntu Desktop?

Jan 27, 2012

windows server 2003,ISA server 2000 Networking :: Connecting ubuntu desktop?

View 1 Replies View Related

Servers :: Desktop Icons High Located In Blue Color

Mar 6, 2011

We have 2003 Domain With Active desktop enable for client.Problem Is who ever loging in to my domain they are getting desktop icons in blue color.i have check these but no result

1}My computer properties-advance- performance
2} desktop right click -arrange icons -lock web items on desktop
3} i have checked with display properties.

View 1 Replies View Related

Servers :: Creating A Remote DNS Server On Windows 7?

Aug 14, 2011

I am wanting to improve my download and upload speeds. I read this statement at maheez.com "Solution for requesting pages is set up your own DNS server, with is kinda complicated (basically what happens, is instead of asking some remote server (takes time) for the site IP needed to connect to, youll request it on your own pc, giving you a higher site access speed).

View 1 Replies View Related

Remote Desktop Won't Work

Jan 2, 2012

Have just been trying to install Remote Desktop between two XP pro laptops When I try to log on I get a black screen with the connection bar at the top with the name of the remote computer and after about thirty seconds it drops the connection. The remote laptop comes up with logon screen but it isn't visible on the on host machine.I have followed all the instructions including file sharing enabled remote accesss etc, Both machines show up on network map and can ping each other.

View 2 Replies View Related

Using Remote Desktop Connection?

Jan 7, 2012

To use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful

View 1 Replies View Related

Remote Desktop Dos Printing?

Nov 20, 2011

i want give the dos printing from remote desktop to local computer on anotherlocation

View 2 Replies View Related

Remote Desktop Via Dual Lan?

Mar 8, 2013

We have a server which in addition to other services is used to stream live hi-def video from our building during special events.We use a software video/audio production mixer which works very well. But we now would like to make a change in the system.Is it possible/practical to use Remote Desktop via the second - as yet unused - LAN in our server. We really would like to put the operators in a different location where they have both video and in-person view of the event being streamed. But we don't want to use more bandwidth on the LAN...the production mixer handles a *lot* of uncompressed video and tends to be a bandwidth hog.

View 4 Replies View Related

Performance Of Remote Desktop Using VPN?

Sep 20, 2011

Can i build a Server through Remote Desktop using VPN, how will be the performance? Is it advisable ?

View 1 Replies View Related

Remote Desktop Connection?

Feb 14, 2012

Is to possible to connect to someone's computer via remote desktop connection w/o them finding out what my ip is?

View 4 Replies View Related

D-Link DIR-615 :: Remote Desktop On LAN

Dec 28, 2011

I have a home network and I routinely connect from my laptops to my wired desktop via Remote Desktop. Routinely, that is, until I replaced my old wireless router with a D-Link Wireless N router. But now, after the change, I can no longer remote desktop in. I *am* able to ping and file share with that computer, just no remote desktop.

View 3 Replies View Related

Port Forwarding Setup - Remote Directly Into One Of Servers?

Jan 19, 2012

I have a small network in my garage, it's basically made up of a bunch of test servers. Those and a win xp machine are all hooked up to a switch, and the win xp machine also has a wireless usb stick that is connected to my wireless router, and is being used to share internet to the rest of the machines. The test servers along with the NIC card on my win xp machine sit on a different subnet, however.When I remote into the win xp machine from my house, i can run a second remote desktop in the first session, into any of my servers. I want to do work on them, but its very laggy.

Is there a way I can setup a port either on the win xp machine or my wireless router so that i can remote directly into one of the servers? so if the win xp machine has a wireless ip address of 192.16.13.102, and one of the servers on the 2nd subnet has an internal ip of 192.2.2.4, can i have it so i can make, for instance, 192.16.13.102:6333 forward to 192.2.2.4? If not, is there any other way i can directly remote into one of the servers, by passing the first remote desktop into win xp? What settings would have to be the same across the line?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved