I'm relatively competent with adding new hardware to an existing network but I am not sure how to do something a little more complicated. I have a small business server that hosts 6 computers via wired network. We run a cable from the main office across the lot to the shop where it connects to a wireless enabled router. The router is wired to two more PCs and hosts 1 laptop wirelessly. I would like to two PCs to be able to connect to the server and access all the common files stored in the server drive - how do I get the PCs to see the server and not just the router/each other? I don't need the laptop to connect to the server, but we do need to wireless router to connect the laptop to the internet.
Remote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, outer...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work. All I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.
I am wanting to improve my download and upload speeds. I read this statement at maheez.com "Solution for requesting pages is set up your own DNS server, with is kinda complicated (basically what happens, is instead of asking some remote server (takes time) for the site IP needed to connect to, youll request it on your own pc, giving you a higher site access speed).
I have a small network in my garage, it's basically made up of a bunch of test servers. Those and a win xp machine are all hooked up to a switch, and the win xp machine also has a wireless usb stick that is connected to my wireless router, and is being used to share internet to the rest of the machines. The test servers along with the NIC card on my win xp machine sit on a different subnet, however.When I remote into the win xp machine from my house, i can run a second remote desktop in the first session, into any of my servers. I want to do work on them, but its very laggy.
Is there a way I can setup a port either on the win xp machine or my wireless router so that i can remote directly into one of the servers? so if the win xp machine has a wireless ip address of 220.127.116.11, and one of the servers on the 2nd subnet has an internal ip of 18.104.22.168, can i have it so i can make, for instance, 22.214.171.124:6333 forward to 126.96.36.199? If not, is there any other way i can directly remote into one of the servers, by passing the first remote desktop into win xp? What settings would have to be the same across the line?
Users are connecting to Site A (PIX 515e) via Cisco VPN client and can access servers/resources within that site no problem. They cannot access anything within Site B (ASA 5505) however. Devices communicating between Site A and Site B have no issues (have site to site VPN configured). I'm assuming that I'm missing something in configuration - or is it not possible for VPN clients connected to the PIX firewall and access data on the other network?
I have successfully installed and configured VPN Client - Version 5.0.07 to connect to ASA 5510 from a remote workstation. Here is the problem, I cannot ping any of the servers or workstations after I successfully connect. I can ping the ASA 5510 using its internal LAN IP, but no other nodes will respond on the remote LAN.
I have a Cisco ASA 5510 that was set up as a VPN server for working remote. I have disabled split tunneling so that all traffic created while VPN'd in goes through the ASA. The problem I'm having I believe would be resolved if I enabled split tunneling but I would prefer another solution. Now..for the problem.When a user is connected via VPN, they can hit all intended devices both public and private accept servers that have static NATs in the FW. So Server A has a public of 188.8.131.52 which is one to one mapped to private address of 10.1.1.1. Now if the remote user brings up a browser and goes to 184.108.40.206 it wont work. The FW gives me a error which is posted below. However, using the private IP of the server works. I thought about trying to manipulate DNS to resolve this as the remote users are using URLs and not IPs when trying to reach these servers but again, was hoping I could resolve the NAT problem that the FW seems to be having.
Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src Outside:192.168.202.100/49238 dst INSIDE:220.127.116.11/80 denied due to NAT reverse path failure 192.168.202.x/24 is the remote vpn ip given via the ASA.
I have setup a site-to-site VPN tunnel between 2 sites using CISCO rv120w.Everything works fine; any PC on one site can access all systems on the other site and vice-versa.The issue I have is when I start a VPN connection another site on Internet using IPSecuritas.I can initiate a VPN to site 1 and site 2; but when connected, I can only access servers that are located into the same site I'm connected to; I cannot ping the remote site.The Range of IP addresses on the internet during my tests is 192.168.11.0 (I 'm using a Mac)
-Systems with IP 192.168.1.1 and 192.168.10.1 are bridges -Systems with IP 192.168.1.2 and 192.168.10.2 are CISCO rv120w
I've been having this problem for the past few weeks, if not months. For a few days, or maybe around a week lol, I havent been able to connect to any Game-servers, may that be Steam, League of Legends, Guild Wars 2 or any of that. I have opened all ports, firewalls are disabled/uninstalled. I've seriously tried every single thing I've read, but I can't get anything to work. My sister (she's on wireless) can play without any problems, so I think it has something to do with my PC.My router is a Netgear RP614v4 and I have a Zyxel ES-105A switch on my desk.Connected the PC directly to the router, didn't work. Unfortunately can't connect my PC directly to the modem.
i have and original xbox 360 hardwired to my linkisis router. i can use xbox live silver with all the game marketplaces and all that but when i have gold and try to go on multiplayer it says xbox liv servers are unavailible. my internet provider is xplornet and i have avg anti virus on my laptop
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
I am trying to connect a LAN to the internet via an RVS4000 for remote access to the LAN and cannot connect to the RVS4000. I am using a static WAN address, entered it in the WAN setup area (subnet, gateway, etc.). I do not use DHCP as all the LAN units are static addressed. I rebooted, etc. but cannot see the router externally (I am pinging from a remote site).If I plug my laptop into the WAN cable and set the laptop to the WAN adress, I have no issues. I have checked the cables (all CAT5e shielded), checked both straight through and crossover cables, and have no luck.
my local site has Cisco 2811 router connecting locally to ASA 5520. Remote site A has Draytek Vigor2950. I have working vpn between local subnet 10.0.0.0/24 and remote site A 10.100.6.0/24. I have remote sites B (10.100.7.0/24) and C (10.100.8.0/24). I would like to route traffic from local site to remote sites B and C via the local-to-remote A vpn. On Draytek routers B and C, I have added to subnet 10.0.0.0/24 to the remote network profile list. On local router, I route traffic for subnets 10.100.7.x and 10.100.8.x to the ASA. On ASA I have added these subnets to the profile for local-to-remoteA vpn.But the vpn will not establish when I attempt to ping from local to remote B or C.
I have and 880 W router. The LAN members can get out t o the internet. Now I want to configure NAT such that outside computers can access a couple of the machines using Remote Desktop (RDP). I am using Configuration Professional.
When I configure inside to outside, the remote computers can't connect to the target machines.When I configure outside to inside, the target machines acn't get to the internet.
When I try to use the advanced NAT definition wizard, I can't complete the task because the only inside pool (?) or LAN (?) is "designated" and not available to select. I can't free it up without deleting the one working NAT entry which is the one that enables all computers to reach the internet.
I have a requirement to create a site to site vpn tunnel on ASA 5510 from a remote site to my HO, ihave already other site-to-site tunnels are up and running on the ASA.The issue is my remote site has got the network address which falls in one of the subnet used in HO(192.168.10.0/24).My requirement is only My remote site need to accees couple of my servers in HO which is in 192.168.200.0/24 subnet.
I'm having an issue with my work computer where it can connect to all of the servers in the company accross the country EXCEPT the servers located in New Jersey. I am running Windows XP SP3. I am able to ping the servers and get a response back, but my network drives are disconnected and I cannot open them. I have tried completely uninstalling the driver for my network adapter and reinstalling it with no affect. Mine is the only computer having this problem and I have uninstalled all software that was installed within the past month to be sure. It is ALL of the servers in New Jersey so I know it's a problem with my computer and not the serers. I had a similar issue a while ago where I could ping Google, but could not get to the website, and that ended up being the ZoneAlarm firewall that I had. That was fixed by uninstalling ZoneAlarm and doing an ipconfig /release & /renew. I re-registered some dlls but that didnt work either.
I'm having a problem connecting to multiple servers. I do know that I have stopped the windows firewall and taken out Norton and avg, yet I still can't connect to any servers. I've even tried on other networks! I can download torrents and surf the internet just fine though. I can't connect to an online class server to do my homework, and I've also tried to start playing WOW but neither will connect. I also don't see peer guardian 2 in *services*
I have an issue here, I need to connect to various anonymus proxy servers, the ip's of which can be freely found on the web. I've tried doing this from a broadband connected computer and it's ok, but the thing is that when I try doing this from a computer that is tied to o router, it doesn't work at all.
Put bluntly, my laptop will not connect to any ftp site/server via any of the following methods:Command Line Software FTP Clients (Filezilla and other such programs) Windows Explorer (window) Browsers
However, if I try to use a WEB-BASED client, I am able to connect without a problem. What's stranger, if I try to connect to the same server on a different computer using the same wireless network (I'm running on Wifi), that computer has not problem connecting to the FTP server via all the methods mentioned above. So that should at least eliminate the wireless network itself from the list of possibilities.
And to the best of my knowledge it has nothing to do with the firewall as I've made every possible setting tweak to allow ftp connection in and out - I've even turned off the firewall and antivirus with no luck.
Which is why I have reason to believe it has to do with my laptop itself.
my partner cannot connect to the internet on her computer. I have tried disabling the ipv6, typing in oranges dns server in the ipv4,and attempted to find the dns automatically. I tried running the ipconfig, but it flashes up for a second then goes off before I can look at it. As mentioned I am with Orange, I contacted them and they wanted to run the computer through an ethernet cable and reset everything which I think is a pain in the backside and I know it should be a bit simpler than that.
Intermittently, say, once or twice a day for several hours, I will be completely unable to connect to servers - I can still use the internet ok, but things such as online multiplayer games, last.fm, youtube, steam refuse to work. Some give errors saying that they are unable to connect to the servers, others claim that the server connection is fine. It happens most commonly in the early hours of the morning (GMT), if that is of any use?
I've been having this problem for the past few weeks, if not months. For a few days, or maybe around a week lol, I havent been able to connect to any Game-servers, may that be Steam, League of Legends, Guild Wars 2 or any of that. I have opened all ports, firewalls are disabled/uninstalled. I've seriously tried every single thing I've read, but I can't get anything to work. My sister can play without any problems, so I think it has something to do with my PC.