Put bluntly, my laptop will not connect to any ftp site/server via any of the following methods:Command Line Software FTP Clients (Filezilla and other such programs) Windows Explorer (window) Browsers
However, if I try to use a WEB-BASED client, I am able to connect without a problem. What's stranger, if I try to connect to the same server on a different computer using the same wireless network (I'm running on Wifi), that computer has not problem connecting to the FTP server via all the methods mentioned above. So that should at least eliminate the wireless network itself from the list of possibilities.
And to the best of my knowledge it has nothing to do with the firewall as I've made every possible setting tweak to allow ftp connection in and out - I've even turned off the firewall and antivirus with no luck.
Which is why I have reason to believe it has to do with my laptop itself.
My computer at work crashed so I had to reinstall windows 7.When it was working properly I was able to connect to our main server computer. After the reinstall I am able to connect to the internet however I am unable to connect main server computer. Usually, before it crashed, the server would automatically show up in the networks folder. Now all I can see it my computer and not the server computer.If someone knows how I can get my computer connecting to the main server I have tried everything and nothing is working.The main server computer it Windows XP and my computer is Windows 7.
how to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
I have two computers. In my first computer Linux operating system its a domain controller and in my second computer server 2003 operating system. In server 2003 I have my oracle database back end. The problem is that oracle is two slow and users are very disturbed it means I have installed front end of oracle in my clients users of domain. Now I am facing the issue of slow down of oracle. It will take a long time to perform a little activity. I have already gave heat and Greece to its processor, but it doesn't work. What should I do?
i have an internet connection thru USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible.
One of the computers at my office died and needs to be replaced. I need to get the new computer set up with an existing user account so that the user can access email and public drives. The new computer is running windows 7 professional.Our server is running SBS 2008.
your computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
I'm having an issue with my work computer where it can connect to all of the servers in the company accross the country EXCEPT the servers located in New Jersey. I am running Windows XP SP3. I am able to ping the servers and get a response back, but my network drives are disconnected and I cannot open them. I have tried completely uninstalling the driver for my network adapter and reinstalling it with no affect. Mine is the only computer having this problem and I have uninstalled all software that was installed within the past month to be sure. It is ALL of the servers in New Jersey so I know it's a problem with my computer and not the serers. I had a similar issue a while ago where I could ping Google, but could not get to the website, and that ended up being the ZoneAlarm firewall that I had. That was fixed by uninstalling ZoneAlarm and doing an ipconfig /release & /renew. I re-registered some dlls but that didnt work either.
I'm having a problem connecting to multiple servers. I do know that I have stopped the windows firewall and taken out Norton and avg, yet I still can't connect to any servers. I've even tried on other networks! I can download torrents and surf the internet just fine though. I can't connect to an online class server to do my homework, and I've also tried to start playing WOW but neither will connect. I also don't see peer guardian 2 in *services*
I have an issue here, I need to connect to various anonymus proxy servers, the ip's of which can be freely found on the web. I've tried doing this from a broadband connected computer and it's ok, but the thing is that when I try doing this from a computer that is tied to o router, it doesn't work at all.
my partner cannot connect to the internet on her computer. I have tried disabling the ipv6, typing in oranges dns server in the ipv4,and attempted to find the dns automatically. I tried running the ipconfig, but it flashes up for a second then goes off before I can look at it. As mentioned I am with Orange, I contacted them and they wanted to run the computer through an ethernet cable and reset everything which I think is a pain in the backside and I know it should be a bit simpler than that.
Intermittently, say, once or twice a day for several hours, I will be completely unable to connect to servers - I can still use the internet ok, but things such as online multiplayer games, last.fm, youtube, steam refuse to work. Some give errors saying that they are unable to connect to the servers, others claim that the server connection is fine. It happens most commonly in the early hours of the morning (GMT), if that is of any use?
I've been having this problem for the past few weeks, if not months. For a few days, or maybe around a week lol, I havent been able to connect to any Game-servers, may that be Steam, League of Legends, Guild Wars 2 or any of that. I have opened all ports, firewalls are disabled/uninstalled. I've seriously tried every single thing I've read, but I can't get anything to work. My sister can play without any problems, so I think it has something to do with my PC.
i have 3g mobile dvr, put a sim card directly into it and it gets an ip address and you should be able to view it remotely but i cannot connect. i can ping the ip no problem and i checked that the port the dvr uses (9000) was also open on that ip and i used a locator to trace the ip and it pinpoints the ip to my isp's base so why i cannot connect to it
I have a ISA 2006 server with a static WAN IP that runs our Office, 2 DC's (1 file server), One sharepoint, and 20 Desktops, In the same rack i have a webserver with its own static WAN IP NOT connected to the Local network (to keep it secure and keep Users from using that as web access). The cable modem has 2 ip's. that goes to a switch , one leg feeds the ISA which in turn feeds the LAN switch. the other leg feeds the webserver. Is it possible to connect the Webserver to the LAN, but keep the WAN IP and not allow users to use that connection to the internet. ( keep all internet traffic going through the ISA ) but allow the webserver to transfer backups and such to the File Server on the LAN. FYI: the Webserver has 4 NIC's
I have a linux(fedora) which i use as a proxy. the proxy then connect to the router. the proxy also serves as my mail server (i use postfix). Problem is, since yesterday i discovered thta i cannot access the internet for any machine connected via the proxy (and any dhcp-assigned machines). As a result, even the webmail is not accessible from any machine.When i tried, i changed some computers so that they connect directly to the router -and they work fine for the internet. Problem is, I am still not able to access webmail.What could be the problem with the proxy.?(NB Postfix is running and http too is running).
i am using open suse 11.3 as OS.. when i try to connect to any mail server over smtp using telnet, their is either a connection time out or server not found error msg..
I'm relatively competent with adding new hardware to an existing network but I am not sure how to do something a little more complicated. I have a small business server that hosts 6 computers via wired network. We run a cable from the main office across the lot to the shop where it connects to a wireless enabled router. The router is wired to two more PCs and hosts 1 laptop wirelessly. I would like to two PCs to be able to connect to the server and access all the common files stored in the server drive - how do I get the PCs to see the server and not just the router/each other? I don't need the laptop to connect to the server, but we do need to wireless router to connect the laptop to the internet.
Some time ago while of facebook i clicked on a link supposedly forwarded from a friend and some sort of flash player virus file was downloaded to my laptop. I proceeded to run a MAlwarebyte scan of the laptop and deleted the downloaded file.However, since then I've been unable to connect to facebook via Internet Eplorer or Goggle Chrome, and I'm getting the message 'Oops! Internet Explorer.
Remote Desktop can't connect, so I've got four servers in the same LAN. Whenever I try remotly access the web server, the message (Remote Desktop can't connect to the remote computer for one of these reasons: 1. Remote access to the server is not enable. 2. The remote computer is turned off. 3. The remote computer is not available on the network) The thing is that I can connect to all servers with any desktop computer in the network, but when I try to do it in my laptop (that is connected to the same LAN) I've got access to the other servers but not to the web server. Sometimes I had to restart this server and works fine for a little while.
