One of the computers at my office died and needs to be replaced. I need to get the new computer set up with an existing user account so that the user can access email and public drives. The new computer is running windows 7 professional.Our server is running SBS 2008.
View 5 RepliesI need to connect a OS2 pc with Windows Server 2008. However, I have tried the Netbeau (which can work in connect with Windows Server 2000), I cannot install the Netbeau to Windows Server 2008.
View 2 Replies View RelatedI have 2 servers 2008 & 20 computers win 7 i need to give for 10 MB Speed for some computers and the others computers 100 MB Speed How?
View 1 Replies View RelatedI have a network domain with 2 domain controllers running windows server 2008. At some point the DNS name for one of the servers got messed up and they stopped talking to each other even though they are on fixed IPs. The DNS problem has been fixed, but they haven't started communicating again. While the DNS was messed up the domain controllers kept running a different copy of the network. The DFS stopped replicating, the users lists fragmented and the network separated into two "shadow domains" with the same name. DC1 says it is healthy, but it claims DC2 is offline. DC2 claims it is healthy but DC1 is offline. I don't even know where to begin repairing this rift.
View 1 Replies View RelatedHow do configure win2008 server to bring up a password prompt box when access via a workgroup pc on lan.
View 1 Replies View RelatedIn windows server 2008 i got the mess "limited connectivity" after one hour (approx)
View 2 Replies View RelatedWe're using a CSS501 to load balance http requests over three servers running windows server 2003 and IIS 6. On Saturday I attempted to switch over to three new servers running the app on Server 2008 and IIS 7.5, I mirrored the used the existing setup to create the new environment (pwgecashwww01,02,03 Owner ACMENewServers and group NewServer).
View 2 Replies View Relatedwe have two servers in our network, one functions as a file server (windows server 2008) and the other as a domain controller with active directory and some database applications running on it (windows SBS 2003). the file server has folders for the different units in our company, these are shared folders. these folders can be accessed by anyone with a domain login by running \servername from their computers, without any further authentication required.
i have tried to set up sharing restrictions with no success, for example the Accounts folder, i right click on it and select properties, and the sharing or security. under both tabs i added three names of those that i want to have access to the folder. these names appear in the sharing list together with:administrator(servernameadministrator) administrators (servernameadministrators) administrator systemeveryone has not been added as is the case with all other folders. what is this system on the list? how i can restrict access, perhaps there is a setting that i have missed or settings in the network that prevent these restrictions?
I have configured a my desktop as a domain controller with server 2008..with dns service running on it. When i tried adding another desktop to this domain, i get the following error message
"Troubleshooting network identification Error: This computer successfully resolved the Domain Name System (DNS) service (SRV) resource record required to locate a domain controller, but it failed to locate a domain controller for the Active Directory domain displayed in the error message.
Cause: The required A (address) resource records that map the name of the domain controller to its IP address do not exist in DNS.
Solution: Verify that the required A resource records do not exist in DNS by using the Nslookup command-line tool.
See also: To verify that A resource records exist in DNS. Cause: The domain controller advertised in DNS may not be connected to the network or is connected to the network but is not running.
Solution: Verify connectivity and then verify that the domain controller is running.
See also: To test a TCP/IP configuration by using the ping command; DNS requirements for joining an Active Directory domain."
I planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies View RelatedFirst network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: 255.255.255.128 and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30
View 1 Replies View RelatedI am looking a way to allow/block certain users to access internet.
View 2 Replies View RelatedHow to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?
View 1 Replies View Relatedi have an internet connection thru USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible.
View 1 Replies View Relatedwhy Windows Server 2008 is not a supported OS for Cisco Network Assistant?I am currently evaluating switch management solutions for use with Catalyst 2960 and 3750 series switches, and would like to be able to backup and restore configurations, as well as make configuration changes. My management Server is running Server 2008.Is Prime LMS my only option?
View 5 Replies View Relatedhow to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
View 1 Replies View Relatednet send command not available on server 2008
View 1 Replies View RelatedI've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View RelatedOur companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies View RelatedI have Server 2008 R2 DC & One ISA server 2006 enterprise. im facing problem with DHCP unable to give DHCP IP from internal LAN. Its taking IP from External LAN IP i.e. connected to Linksys external Router which has DHCP enabled with different IP class i.e .class B. After shutdown client PC it will take 0.0.0.0 no IP will be assigned & says linited connectivity.
View 4 Replies View RelatedI set-up my law firm network with a server 2008 database. Now I am renting out one of my offices to a separate lawyer and I want him to be able to use my network to access the internet, but not my server 2008. Is that possible or is it already secure being I haven't installed any of my software on his computer?
View 2 Replies View RelatedUnder Service in Win NT 2008 server, how can I remove the auto-shut down task schedule for all students' computers in the classrooms. It always popup a message box at 5:30pm - "auto shutdown" in all workstations (win xp). How to remove that from "service" and not affecting the server to shutdown? Click where to disable/stop it?
View 2 Replies View Relatedwhen i am using win server2003 the file sharing is disconnected automatically.
View 2 Replies View RelatedI need to create a login script for all users. I am running Win xp Pro and Win 7 on my domain. the Server is windows 2003.
View 1 Replies View RelatedI have a friend who is looking at getting a new computer and he would like to know if he'll be able to share files and printers and maybe an Internet connection between his XP Pro computer and a new Win8 one using a Workgroup with no DC.
View 2 Replies View RelatedHave an older laptop running XP Home, Desktop running XP Pro with printer on it. Wireless network setup and doing fine for bidirectional file share and print share from old lappie to desktop. All worked great.Bought a brand new high end laptop with Win 7 (not impressed). Finally got the Win 7 new one to recognize both older computers on the Win 7 computer and was able to access file share and print on the desktop. Thought I was doneNope, now while I can see the old lappie and it can see it in the Win7 computer both directions give me cannot access the drive or specific files even though it "sees" themAll files and disks are set to full share. No password is required or any homegroup is setup on the win 7 system. I've been in the bus. a long time so you know I'm at the end of the rope. All searches through knowledge base and the web have yielded no results to this.I did find an absolute to this in insuring that both systems have the same workgroup. Changed the old lappie to the right name. Made no difference in access (after several reboots). Obviously can't run Easy Transfer with this situation.
Now problem #2. I changed the old lappies workgroup to the same as the Win7 computer in the hopes of fixing this. Made no difference but now I have two iterations my XP laptop in the Win 7 system.When selected, the info for one has the old workgroup and selecting the other shows the new workgroup (matching the Win7 workgroup).Anyway, throwing up my hands in frustration and disgust. Find no way to even dump the old workgroup map listing. Jeez. Sure glad they (M/S) made this better?
I finally was able to connect two of my computers up to share files. The only problem is My Win7 computer can't see the xp computer although the Xp can see the Seven. When I first set it up Explorer showed the name of the Xp but when I clicked on it the dialog said it couldn't find the computer. The Xp name was in all caps and when I checked on the Xp the name was all lower case so I tried to change the name. When I tried, the OK button was grayed out so I went in to So I clicked on More and was able (I thought) to change the name there. I had to reboot and when I did the computer had just appended the DNS entry I had to give to the original lowercase name.
I was finally able to rename the XP computer! I changed the name to NETBOOK all caps like I had originally thought it was. BUT it makes no difference to the Win7 machine it still can't see the XP machine. I did a refresh and the Xp's name NETBOOK showed up But I am still back where I started from because when I click on it a dialog box just says that it can't access ||NETBOOK.
My hp computer is not recognizing any network adapters. Im running windows 7.
View 14 Replies View RelatedAt our small business, we have one person who brings in Windows 7 laptop. When she does, it hijacks all network resources: The printer will not work, any new computers that come in will not be able to connect to wireless network, etc. This is consistent --every time the person brings the computer.
View 1 Replies View RelatedI changed my ISP to "Clear.com" and now one, seldom used, Win7 computer will not connect to the wireless network. I have two other desktops hardwired and two laptops on the wireless that work fine. The two laptops are in the same room as the Clear 'modem/router', while the Win7 box is not, if that matters. The Win7 box worked in that location when I was on the cable and had a separate wireless router.The box that will not connect, does show that the wireless connection is availableand the adapter shows to be working properly in Device Manager.
View 3 Replies View RelatedI am about to buy a Netbook from HP with windows 7 Starter.But a few days back when I tried to connect my friend's laptop to my network using WiFi ,it accessed the Internet but did not detect any other XP computers on the Network neither could I ping them nor could I access their shared folders.
2)And What is N Draft?? and how is it different from WiFi-N?
3)And can I set up Guest Network so that I can give the connected computers Internet access but no Shared Folder access..
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View Related