Setup 2 Network Card Windows Server 2008?

Aug 16, 2011

First network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30

View 1 Replies


How To Setup NAT In Windows Server 2008

Nov 5, 2011

i m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address

View 1 Replies View Related

Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2

May 15, 2011

I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.

View 16 Replies View Related

Cisco Firewall :: Unable To Setup VPN Between Windows 2008 Server R2 And ASA 5505?

Sep 9, 2012

I have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP =, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP =, IKE SA Proposal # 1, Transform # 1 acceptable  Matches global IKE entry # 1


View 1 Replies View Related

Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2

Jun 27, 2012

I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.

View 4 Replies View Related

Setup 2 Network Cards In Server 2008 R2 To Access Internet For Lan?

Sep 2, 2012

My Windows Server 2008 r8 has 2 network card

1st card I have connected to Internet Router

2nd card I have set up the LAN to access the database application from server with 2 clients.


1) Currently 2 clients can't access the internet

2) How to setup the 2 clients to be able to access to internet?

View 1 Replies View Related

Setting Up A Network To Run Windows Server 2008?

Nov 29, 2012

i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?

View 5 Replies View Related

Home Network :: Control Lan Computers With Windows Server 2008?

Feb 5, 2012

I am looking a way to allow/block certain users to access internet.

View 2 Replies View Related

Configure In Windows Server 2008 Network NIC1 Is WAN / NIC2 Is LAN?

Mar 29, 2011

How to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?

View 1 Replies View Related

Cisco :: 2960 / 3750 - Windows Server 2008 Not Supported OS For Network Assistant

Apr 2, 2012

why Windows Server 2008 is not a supported OS for Cisco Network Assistant?I am currently evaluating switch management solutions for use with Catalyst 2960 and 3750 series switches, and would like to be able to backup and restore configurations, as well as make configuration changes. My management Server is running Server 2008.Is Prime LMS my only option?

View 5 Replies View Related

Linksys Wireless Adapters :: WUSB300N Windows Server 2008 Doesn't Find Any Network?

Aug 9, 2008

I've just bought a WUSB300N Wireless USB Network Adapter and installed it with the  Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.

View 5 Replies View Related

Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2

Jul 5, 2012

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

View 2 Replies View Related

Can't Connect To Server 2008 Via Server Manager On Windows 7

Feb 11, 2011

I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.

View 18 Replies View Related

Dell :: Precision M4500 - 1397 WLAN Mini Card To Work With Windows 2008 X64 R2

Oct 25, 2011

How to successfully get a Dell Wireless 1397 to work with Windows 2008 x64?  I have a Precision M4500 that I managed to install Windows 2008 x64 R2 on.  I installed the Windows 7 drivers for the card and the Device Manager says the device is working properly.  But when I go to enable the device, it acts like it is enabling it, but the properties always say "disabled".

View 1 Replies View Related

Server 2008 R2 Windows Server Backup

Dec 14, 2010

I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?

I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.

View 19 Replies View Related

Windows Server 2008 With Reg Key?

Mar 7, 2013

I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.

View 1 Replies View Related

Windows Server 2008 R2 VPN

Aug 13, 2012

I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.

View 5 Replies View Related

How To Use Windows Server 2008 As Router

Sep 4, 2012

I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.

Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:

Now we have seen that we need to use this command (in cmd) to add a static route in W2008:


Q1: What exact command(s) do we have to use to make the Laptop in to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)

We have tried several combinations and can't make laptop to access Internet, not even to ping We have just accomplished pinging to from the Laptop, and to ping from the Server but that's as far as we went.

View 4 Replies View Related

Can't Join A Windows 2008 Server

Jul 17, 2011

I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.

View 2 Replies View Related

Installing Windows 7 On Server 2008 LAN

Mar 24, 2012

Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.

View 1 Replies View Related

Windows Server 2008 R2 With Dynamic IP?

Jan 9, 2013

I have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?

View 1 Replies View Related

Static IP For Windows 2008 Server R2

Jun 17, 2012

I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.

View 4 Replies View Related

Using Windows Server 2008 R2 As Webhost?

Nov 8, 2011

Is it possible to use windows server 2008 as a webhost for a website i'm building?

View 6 Replies View Related

Cisco :: Does WCS 5.0 Run On Windows 2008 Server

Feb 8, 2009

Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized. 

View 6 Replies View Related

Cisco Routers :: RV082 And Win 2008 Server - Split Tunneling Setup

Jun 17, 2012

Trying to setup split tunneling over Site-to-Site (Gateway To Gateway) VPN between RV082 and Win 2008 server. Tunnel seems to be ok, I can ping/access by IP hosts from both ends. But I can't get split DNS to work. Here is the setup is the DNS server for xyz.local zone. It is at remote network.

The tunnel and routing work properly. I can ping either from RV082 (system management -  diagnostics) or from hosts at local network.
Moreover, I can run nslookup on a host from RV082 side (local network), set as server to be queried and test dns resolution. names of hosts from xyz.local are resolved correctly. But. If I use nslookup on host to query RV082 as a DNS server and query for a host from xyz.local it responds that xyz.local is nonexistent domain. The same result I get trying to resolve/ping same name on system management -  diagnostics page. Resolution of names from xyz.local fails. But Internet names are resolved
just fine.
I've tried to reboot the router,  connect/disconnect the tunnel, set Domain Name fields of split DNS configuration pagein different ways including fqdn of hosts from xyz.local No effect. Just the same situation.

View 2 Replies View Related

Windows Server 2008 Core Installation

Jul 27, 2011

Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.

View 3 Replies View Related

Desktop Redirection In Windows 7 On Server 2008 Dc?

Jul 26, 2011

im having problems getting desktop folder redirection to work on windows 7 machinesI have users set up just with local profiles but want to redirect "my documents" and "desktop" directories to the server. I have set up the gpo's on the server and it all works fine propergating to the xp machines but the windows 7 machines just wont take the desktop redirection. However "eventually" it did take the "my documents" redirection policy

View 7 Replies View Related

Vpn And Mapped Drives Server 2008 Windows 7?

Jan 30, 2013

I have a windows 2008 foundation server at a clients property and they wish to have users access shares on a data drive that is seperate on the server.I have the server setup with active Directory Users and logon scripts to their local shares on the data drive but need to setup VPN so they can use their mapped drives at home.

View 1 Replies View Related

Installing Windows 7 Using GPOs On Server 2008

May 27, 2011

What are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.

View 1 Replies View Related

Windows Server 2008 / RDP Through Router - No Control

May 1, 2012

I have an office with a network that I have no control of. I can't access the router to make changes at all. The router does have a real IP address.There is a server on this network that I need to access through remote desktop. (Terminal services on Windows Server 2008)Normally I would just pass 1723 through the router and set up VPN. Without control of the router I am lost. I really don't want to use services like Logmein or Gotomypc, because these control the console.

View 1 Replies View Related

Windows 2008 R2 Server - Error 105 For Gmail Only?

Mar 8, 2013

I run a tiny home domain with 1 Windows 2008 R2 server and 2 clients (one for me and one for the hubby). Our server is DC, DNS, and DHCP server (and some other roles). Our clients are both Windows 8 but we use the standalone Chrome installation, version 25.0.1364.152 m.The problem is that on my Windows 8 client, every once in a while (not the same time period each time, but roughly every 6-15 days) I get the error in the title on one site when using Chrome only, which is Gmail. I can access and resolve Google and every other site, and my DNS server itself can resolve Gmail, but not until I flush the DNS of my local client will Gmail work again. Also strangely, I have left it on the morning when it happened before, and when I came home from work it had sorted itself out. The other client, hubby's Win 8 PC, also sometimes gets this issue, but not nearly as often as I do. Flushing the local DNS cache resolves it for him as well.

I used my ISP's DNS servers for forwarding initially, but changed to Google's and when this kept happening, and it didn't seem to make a difference. I've enabled scavenging and aging and all sorts and those are faithfully renewing themselves as expected, but as the problem only lies on the clients and never the server, I'm quite lost as to what to try next.I've had a look on the Chrome forums (gulp) and nothing seems to be as specific as this fault

View 1 Replies View Related

Windows 2008 Server / VPN Not Working Externally?

Apr 29, 2011

I just finished setting up VPN server on my Windows 2008 server. I defined the users that should be able to access the server and applied permissions. When I test the VPN connection on the LAN (loacally) I have no trouble connecting and establishing VPN connection.However when I tried externally it's a different story. I am not able to connect and always get the same not so clear 800 error ...The remote connection was not made because attempted VPN tunnel failed. I have Zyxel router for my internet connection and I have forwarded all relevant ports I think for the protocols I am using. Port such as 1723,1701,1702,47,50,51,500,1293,443,4500 are forwarded to the server.I am able to telnet to the server on port such as 1723.

View 1 Replies View Related

Cisco :: LMS 4.1 Installation On Windows Server 2008 R2

Feb 7, 2012

As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.

2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.

View 17 Replies View Related

Copyrights 2005-15, All rights reserved