How To Setup NAT In Windows Server 2008
Nov 5, 2011i m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies
ADVERTISEMENT
Setup 2 Network Card Windows Server 2008?
Aug 16, 2011First network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: 255.255.255.128 and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30
View 1 Replies View RelatedCisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
May 15, 2011I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedCisco Firewall :: Unable To Setup VPN Between Windows 2008 Server R2 And ASA 5505?
Sep 9, 2012I have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, IKE SA Proposal # 1, Transform # 1 acceptable Matches global IKE entry # 1
[Code].....
Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
Jun 27, 2012I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedCan't Connect To Server 2008 Via Server Manager On Windows 7
Feb 11, 2011I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedServer 2008 R2 Windows Server Backup
Dec 14, 2010I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
Windows Server 2008 With Reg Key?
Mar 7, 2013I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedWindows Server 2008 R2 VPN
Aug 13, 2012I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedSetup 2 Network Cards In Server 2008 R2 To Access Internet For Lan?
Sep 2, 2012My Windows Server 2008 r8 has 2 network card
1st card I have connected to Internet Router
2nd card I have set up the LAN to access the database application from server with 2 clients.
Question
1) Currently 2 clients can't access the internet
2) How to setup the 2 clients to be able to access to internet?
How To Use Windows Server 2008 As Router
Sep 4, 2012I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
Can't Join A Windows 2008 Server
Jul 17, 2011I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedInstalling Windows 7 On Server 2008 LAN
Mar 24, 2012Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedWindows Server 2008 R2 With Dynamic IP?
Jan 9, 2013I have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View RelatedStatic IP For Windows 2008 Server R2
Jun 17, 2012I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedUsing Windows Server 2008 R2 As Webhost?
Nov 8, 2011Is it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies View RelatedCisco :: Does WCS 5.0 Run On Windows 2008 Server
Feb 8, 2009Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View RelatedCisco Routers :: RV082 And Win 2008 Server - Split Tunneling Setup
Jun 17, 2012Trying to setup split tunneling over Site-to-Site (Gateway To Gateway) VPN between RV082 and Win 2008 server. Tunnel seems to be ok, I can ping/access by IP hosts from both ends. But I can't get split DNS to work. Here is the setup
10.10.100.2 is the DNS server for xyz.local zone. It is at remote network.
The tunnel and routing work properly. I can ping 10.10.100.2 either from RV082 (system management - diagnostics) or from hosts at local network.
Moreover, I can run nslookup on a host from RV082 side (local network), set 10.10.100.2 as server to be queried and test dns resolution. names of hosts from xyz.local are resolved correctly. But. If I use nslookup on host to query RV082 as a DNS server and query for a host from xyz.local it responds that xyz.local is nonexistent domain. The same result I get trying to resolve/ping same name on system management - diagnostics page. Resolution of names from xyz.local fails. But Internet names are resolved
just fine.
I've tried to reboot the router, connect/disconnect the tunnel, set Domain Name fields of split DNS configuration pagein different ways including fqdn of hosts from xyz.local No effect. Just the same situation.
Windows Server 2008 Core Installation
Jul 27, 2011Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies View RelatedDesktop Redirection In Windows 7 On Server 2008 Dc?
Jul 26, 2011im having problems getting desktop folder redirection to work on windows 7 machinesI have users set up just with local profiles but want to redirect "my documents" and "desktop" directories to the server. I have set up the gpo's on the server and it all works fine propergating to the xp machines but the windows 7 machines just wont take the desktop redirection. However "eventually" it did take the "my documents" redirection policy
View 7 Replies View RelatedVpn And Mapped Drives Server 2008 Windows 7?
Jan 30, 2013I have a windows 2008 foundation server at a clients property and they wish to have users access shares on a data drive that is seperate on the server.I have the server setup with active Directory Users and logon scripts to their local shares on the data drive but need to setup VPN so they can use their mapped drives at home.
View 1 Replies View RelatedInstalling Windows 7 Using GPOs On Server 2008
May 27, 2011What are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedSetting Up A Network To Run Windows Server 2008?
Nov 29, 2012i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies View RelatedWindows Server 2008 / RDP Through Router - No Control
May 1, 2012I have an office with a network that I have no control of. I can't access the router to make changes at all. The router does have a real IP address.There is a server on this network that I need to access through remote desktop. (Terminal services on Windows Server 2008)Normally I would just pass 1723 through the router and set up VPN. Without control of the router I am lost. I really don't want to use services like Logmein or Gotomypc, because these control the console.
View 1 Replies View RelatedWindows 2008 R2 Server - Error 105 For Gmail Only?
Mar 8, 2013I run a tiny home domain with 1 Windows 2008 R2 server and 2 clients (one for me and one for the hubby). Our server is DC, DNS, and DHCP server (and some other roles). Our clients are both Windows 8 but we use the standalone Chrome installation, version 25.0.1364.152 m.The problem is that on my Windows 8 client, every once in a while (not the same time period each time, but roughly every 6-15 days) I get the error in the title on one site when using Chrome only, which is Gmail. I can access and resolve Google and every other site, and my DNS server itself can resolve Gmail, but not until I flush the DNS of my local client will Gmail work again. Also strangely, I have left it on the morning when it happened before, and when I came home from work it had sorted itself out. The other client, hubby's Win 8 PC, also sometimes gets this issue, but not nearly as often as I do. Flushing the local DNS cache resolves it for him as well.
I used my ISP's DNS servers for forwarding initially, but changed to Google's 8.8.8.8 and 8.8.4.4 when this kept happening, and it didn't seem to make a difference. I've enabled scavenging and aging and all sorts and those are faithfully renewing themselves as expected, but as the problem only lies on the clients and never the server, I'm quite lost as to what to try next.I've had a look on the Chrome forums (gulp) and nothing seems to be as specific as this fault
Windows 2008 Server / VPN Not Working Externally?
Apr 29, 2011I just finished setting up VPN server on my Windows 2008 server. I defined the users that should be able to access the server and applied permissions. When I test the VPN connection on the LAN (loacally) I have no trouble connecting and establishing VPN connection.However when I tried externally it's a different story. I am not able to connect and always get the same not so clear 800 error ...The remote connection was not made because attempted VPN tunnel failed. I have Zyxel router for my internet connection and I have forwarded all relevant ports I think for the protocols I am using. Port such as 1723,1701,1702,47,50,51,500,1293,443,4500 are forwarded to the server.I am able to telnet to the server on port such as 1723.
View 1 Replies View RelatedCisco :: LMS 4.1 Installation On Windows Server 2008 R2
Feb 7, 2012As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Configure DHCP And DNS On Windows Server 2008 R2?
Apr 16, 2013I want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.
Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?
Windows Server 2008 Router Not Working As Gateway
May 14, 2012I am trying to learn more about networking and system administration. I am practicing allot on VMs i am running here at home. I am not sure if it is allow to ask beginners questions on this site but i will try my luck anyway.
View 2 Replies View RelatedTwo Nics Enabled But Cannot Access Windows 2008 Server?
Apr 15, 2011The situation is I have a windows 2008 server with two nics, connected to two routers. The routers are connected together as well. This diagram might explain further:[url]....
Each router effectively defines a completely different network. The server nic connected to the internet facing router is configured with minimal properties (no ip6, no file sharing, no netBIOS over tcp etc), the nic connected to the internal router has mostly default properties. Both nics have static ip addresses. Both networks define a subnet of 255.255.255.0. The nics are not bridged in the server and it is not acting as a router or anything network related.
The problem is I cannot access the server when both nics are enabled. If I disable the nic for the internet facing router, then everything is fine. If I establish a connection to the server such as through remote desktop, then re-enable the nic it still works but I can't ping or make new connections.
Connect To Internet From Local Dns In Windows Server 2008?
Dec 15, 2012I build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View RelatedWindows Server 2008 - Unable To Add Computer In Domain?
Apr 23, 2011I have configured a my desktop as a domain controller with server 2008..with dns service running on it. When i tried adding another desktop to this domain, i get the following error message
"Troubleshooting network identification Error: This computer successfully resolved the Domain Name System (DNS) service (SRV) resource record required to locate a domain controller, but it failed to locate a domain controller for the Active Directory domain displayed in the error message.
Cause: The required A (address) resource records that map the name of the domain controller to its IP address do not exist in DNS.
Solution: Verify that the required A resource records do not exist in DNS by using the Nslookup command-line tool.
See also: To verify that A resource records exist in DNS. Cause: The domain controller advertised in DNS may not be connected to the network or is connected to the network but is not running.
Solution: Verify connectivity and then verify that the domain controller is running.
See also: To test a TCP/IP configuration by using the ping command; DNS requirements for joining an Active Directory domain."