My Windows Server 2008 r8 has 2 network card
1st card I have connected to Internet Router
2nd card I have set up the LAN to access the database application from server with 2 clients.
Question
1) Currently 2 clients can't access the internet
2) How to setup the 2 clients to be able to access to internet?
First network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: 255.255.255.128 and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30
View 1 Replies View RelatedI set-up my law firm network with a server 2008 database. Now I am renting out one of my offices to a separate lawyer and I want him to be able to use my network to access the internet, but not my server 2008. Is that possible or is it already secure being I haven't installed any of my software on his computer?
View 2 Replies View RelatedI have a static ip , So how co configure my server 2008 for the access from internet [URL]
View 1 Replies View RelatedI am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies View Relatedi m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedI'm planning to create a network of wifi access points all in different locations. Those locations all have different wifi routers and networks. I'm looking for a easy solution that let easily setup those networks to ask authentication credentials (in a browser page, once a user is inside the wifi and wants access the internet) by an external server possibly without overloading too much that server.
View 1 Replies View RelatedI am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedI have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, IKE SA Proposal # 1, Transform # 1 acceptable Matches global IKE entry # 1
[Code].....
I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
Trying to setup split tunneling over Site-to-Site (Gateway To Gateway) VPN between RV082 and Win 2008 server. Tunnel seems to be ok, I can ping/access by IP hosts from both ends. But I can't get split DNS to work. Here is the setup
10.10.100.2 is the DNS server for xyz.local zone. It is at remote network.
The tunnel and routing work properly. I can ping 10.10.100.2 either from RV082 (system management - diagnostics) or from hosts at local network.
Moreover, I can run nslookup on a host from RV082 side (local network), set 10.10.100.2 as server to be queried and test dns resolution. names of hosts from xyz.local are resolved correctly. But. If I use nslookup on host to query RV082 as a DNS server and query for a host from xyz.local it responds that xyz.local is nonexistent domain. The same result I get trying to resolve/ping same name on system management - diagnostics page. Resolution of names from xyz.local fails. But Internet names are resolved
just fine.
I've tried to reboot the router, connect/disconnect the tunnel, set Domain Name fields of split DNS configuration pagein different ways including fqdn of hosts from xyz.local No effect. Just the same situation.
i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies View Related[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
Here's what I need to do. I have a file server at work that I need to be able to allow our employees to access the files when they are traveling. I know the server's ip address and know how to port forward and how to share certain folders thru windows, but this is all new territory for me.
View 2 Replies View RelatedOur companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies View RelatedI have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies View RelatedThe situation is I have a windows 2008 server with two nics, connected to two routers. The routers are connected together as well. This diagram might explain further:[url]....
Each router effectively defines a completely different network. The server nic connected to the internet facing router is configured with minimal properties (no ip6, no file sharing, no netBIOS over tcp etc), the nic connected to the internal router has mostly default properties. Both nics have static ip addresses. Both networks define a subnet of 255.255.255.0. The nics are not bridged in the server and it is not acting as a router or anything network related.
The problem is I cannot access the server when both nics are enabled. If I disable the nic for the internet facing router, then everything is fine. If I establish a connection to the server such as through remote desktop, then re-enable the nic it still works but I can't ping or make new connections.
I just started a new job and on there server running Server 2008 they have a 1TB hd it is mirrored. Issue I saw right away is they save EVERYTHING there. Is there an easy way to just add diskspace like as an external storage or whatever without having to rebuild server and rebuild raid?
View 1 Replies View Relatedi am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies View RelatedI am having trouble setting up mapped network drive or folder. My server and workstation are set up on a domain with windows server 2008 r2. The server only shows up on my workstation(windows 7) when I put in \server in the search. It pops up then on the left hand side but not in the main window. When I go back to my computer "map network drive" I hit browse and still the server does not show up under the network (but my computer does). When I try to do this on the server, I go to map network drive and nothing shows up under the network. I have even gone into group policies and mapped the drive that way and still nothing shows up.
View 1 Replies View Relatedwe have two servers in our network, one functions as a file server (windows server 2008) and the other as a domain controller with active directory and some database applications running on it (windows SBS 2003). the file server has folders for the different units in our company, these are shared folders. these folders can be accessed by anyone with a domain login by running \servername from their computers, without any further authentication required.
i have tried to set up sharing restrictions with no success, for example the Accounts folder, i right click on it and select properties, and the sharing or security. under both tabs i added three names of those that i want to have access to the folder. these names appear in the sharing list together with:administrator(servernameadministrator) administrators (servernameadministrators) administrator systemeveryone has not been added as is the case with all other folders. what is this system on the list? how i can restrict access, perhaps there is a setting that i have missed or settings in the network that prevent these restrictions?
i am setting up a windows server 2008 to be used as a nas on my bell modem network that my pc is also on. the bell modem is then connected to a dlink 655 router by lan on the bell modem to wan on the dlink. the dlink is used for wireless connections to the laptops in the house. my problem is that the laptops cant see my nas but have access to the internet. should i switch my program for the nas from windows server 2008 to something like free nas or can i change setting in my router and modam?
View 1 Replies View RelatedI build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View RelatedI am looking a way to allow/block certain users to access internet.
View 2 Replies View RelatedHow to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?
View 1 Replies View Relatedwhy Windows Server 2008 is not a supported OS for Cisco Network Assistant?I am currently evaluating switch management solutions for use with Catalyst 2960 and 3750 series switches, and would like to be able to backup and restore configurations, as well as make configuration changes. My management Server is running Server 2008.Is Prime LMS my only option?
View 5 Replies View RelatedI've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View RelatedI have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.
View 5 Replies View Relatedi have an internet connection thrw USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible
View 2 Replies View RelatedWas told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 3 Replies View RelatedI have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedI've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results
View 3 Replies View Related