Linksys Wireless Router :: Home Network E1000 Setup Without Internet Access?
Aug 3, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
Trying to access the internet with a dell laptop after my daughter messed with the router. She gave me the passowd but when I try to log in from the laptop that has never been logged on since the pw changed, I get a message that wants the network key. I have read several posts about getting the network key but didn't see a network key.I have cisco connect on a different computer and can access the details of the router but haven't found the network key. I can get to Wireless, Wireless Security and the security mode is WPA2/WPA. I can see the password but where is the network key?
Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
I am trying to determine the best option for extending my home network. I am currently running an E2000 as my router and am considering the purchase of a Valet Plus to use as only an Access Point. Alternatively I have a used E1000 in good condition. Which would be best for use as an Access Point only?
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it. NOW my HP laptop shows my router connected, BUT will not access internet.
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
I have an ADSL modem connected to a Cisco E-1000 router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.
I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail.
Firstly I cannot get my Linksys RE1000 to work with my network having tried the set up CD on 2 computers (mac and windows). The main router is a BT Home Hub 2.0
The main router is in the basement where out internet connection enters the house, also in the basement is our LAN board where we have ethernet cables extending to parts of the house. There is weak wireless signal from groundfloor up to the top floor so wanted to find something where I could plug into the ethernet port and it would broadcast an wireless network to the upper floors/areas with a weaker signal. Thought the RE1000 would do this job but i can't get it to do it wirelessly let alone connect it to the main router using a ethernet cable.
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
I'm trying to set up an Iomega Home Media Network Cloud NAS and I'm having problems with opening ports 50500-50599. I have opened port 80 and 443 successfully and included the above port range above as well, but when I check it on www.yougetsignal.com the ports 50500-50599 are still closed. I even tried to split the range in two parts, and still no success. I have been in contact with my ISP and confirmed they do not block any ports in the 50500-50599 range and that the cable modem (a Motorola SBV5120) is operating in Bridge Mode.
I'm trying to set up my E1000 router and when I run the Cisco Connect software that came with the router I get a message that says that it can't find the router, I've tried running it with my computer connected to the router and not connected. I've looked through the FAQ section and didn't really find anything. I'm trying to set it up on a laptop, it's a Vaio running Windows 7, I don't if that makes any difference.
I have two computers. My host computer runs Windows 7 64-Bit. Last December I upgraded from Home Premium to Ultimate, which may have changed my configurations though a month before I had to do a complete reinstall of the Home Premium before I acquired the upgrade. My remote computer is XP-Pro. The HP connection is wireless. There is no problem printing; but to use some features the HP on its control panel requires me to enter a proxy address. How can I configure my router settings to fully use the HP web services? At this point, the HP doesn't even update. I cannot access things like apps, ePrint and other web printing functions because of this sudden need for a proxy connection. It doesn't even show the email address for the device.
i recently had to wipe hardrive of my laptop and am having trouble getting hooked back up to my linksys E/1000 , who can i contact about getting password and network name
I used Cisco connect to set up guest access with a secure password. Cisco Connect now indicates guess access is allowed and shows the password. However, when I actually try to connect to the guest network, it shows no security at all, and I can join the network without a password.
I'm trying to connect my Cisco lab to the internet. I've configured my 2611 to accept DHCP. I can ping the Linksys E1000 router but can't ping the modem on the other side, and cannot get out to the internet with the PC that's connected to the lab. When I look at the DHCP table in the E1000 the 2611 shows up in the table. I can ping all other computers on the lan, just not the modem to get out to the net.I have the configuration for the 2611. Did I miss something. Is the modem blocking ICMP traffic?
Router#sh run Building configuration... Current configuration : 931 bytes ! version 12.3 service timestamps debug datetime msec
I just got E1000 cisco wireless router. Started setup, everything worked fine and replaced admin password with my own. For some reason got error message. tried to redo setup and got message router not recognized. used laptop and found out that wireless works fine. After few days noticed that there is a (mynetworkname) guest connection you can connect without any password. i don't need that stupid thing and my question is how to disable guest network? I cannot reach Main Menu from cd and have no idea where to look for it when i connect to router by web.
So I just setup a new router and got everything up and running...I got every wifi device connected, my iphone, ps3, laptop..except one laptop.Its a Windows Vista laptop, I can connect to the network but I cant receive bytes or load web pages. I can connect to the network but not the World, its blocked by an X...I dont know if vista laptop has the same ip as another device.. Cisco E1000
I would like to wirelessly connect my printer through the new router without internet. The setup CD won't allow me to install without an internet connection.
I am extremely new to network but also excited with the things you can achieve with a Cisco switch.For about 3 months I sat down looking at my "Cisco C2950-24 Switch", this surely for such a beastly looking thing it must be able to do something other than just allow you to plug in cables. So with that said I started to do some reading and watched a couple of You Tube Videos.I am on the route to complete my first goal and thats have my own VLAN setup with 1 Server and 6 clients. The Server is running ESXi therefore a few other servers are running inside it too.So my VLAN - VLANID 20 running the network 172.22.22.0. On the physical switch I have the following:Port 1 - WAN incoming connection from my Router on the network 192.168.178.0Port 2 thru 9 all running on VLAN 20.By the way I am using the GUI Cisco Network assistant
Currently I'm living in a dorm. The house has wireless network. But WEP encryption is used to secure it. I know this method is not safe. Also since there are many people are living in the house i don't want my computers be connected to this network.What i want to do is to setup my own network. I bought a NetGear DGND3300 router. I setup a WPA2 protected wireless network. I can connect all my devices to this network but naturally this way i have no Internet access.Is there a way to use Internet access of the house's router but still keep my local traffic not seen by anybody else
Orange sent me a replacement Netgear DNG1000 and from the moment I had it there was issues, if N mode was enabled and I had to set it to B/G only for it to have a stable connection, not a problem as I only use it for the internet. The range on it was roughly the same as the livebox. For a few weeks it worked fine until recently it started to go insane, on the main computer the wifi works most of the time with 80%-95% signal strength, and then every now and then it will suddenly lose communication with the router but act as if it was connected for 5-10 minutes, signal strength is still at about 90% yet I can't access the router or the internet. Wifi works fine at full speed on the stairs, drops to a few bytes per second on the landing and then increases back up to full speed in the room next to it. In the one bedroom the wifi works up until the door where it instantly drops from full speed to a few bytes a second. This drop off point is only a few cms, as in full speed at one place, move it back a few cm and it slows down loads, but I still get 4-5 bars on windows and -50 RSSI on inSSIDer, about 94% strength and a link quality which tends to fluctuate. What could be causing this, specifically the weird instant deadzones and randomly not responding.
I have a home network with a Linksys E4200 connected to the ISP's fiber box. The problem is that when I'm connected to the Linksys, either wired or wireless, the connection to the internet will drop after what seems to be a random amount of time (normally anywhere from 2-10 minutes). I can restore the connection by doing any of these things:-reboot Linksys-disconnect and reconnect cable from router to fiber box-if on wireless connection, make changes to the router wifi settings, like change the wifi channel.The internal network stays up, and I can ping both the internal and external ip of the router, but not the fiber box. I have also had the same behavior with an Edimax Wifi AP and less frequently with a Edimax router (once every 1-2 days). I have done everything I can think of:-changed the wifi channels-changed the ip ranges, subnets, turned router DHCP off and back on-booted the fiber box-changed cables-updated all routers to the latest firmware, the network cards with latest drivers...and loads other things that I don't remember right now. For the wifi side of things, there are no other networks in range that could interfere. The same problem occurs on both my and wife's Win 7 laptops and on the iMac (latest OSX). Here's a fun detail: while the Linksys has lost its connection to the internet, I can still access the internet through the old Edimax router connected to the same fiber box, either wired or wireless.
I have a Linksys EA4500 setup on my corporate network for wireless access. I have enabled the guest network and from all I can tell it's on a seperate subnet from my internal network like it should be. 192.168.x.x My internal is on a 10.x.x.x network. I conenct to the guest network using a laptop and I'm prompted for a password to get to the internet, which I like. The one issue I'm seeing is when I'm connected to the guest network I can still do an RDP session to internal resources. How is this possible if the guest network is on a seperate subnet?I take a laptop which has not been joined to my domain, connect to the guest ssid, and then open an RPD session and enter an IP address for an internal server and it connects. Is there a setting to keep this from happening
The router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...
I have 2 laptops...a Compaq Presario (wireless b/g) running Win Xp and A Dell Vostro (wireless n) running Win 7 Pro. No problem with the Win XP but the Win 7 refuses to access the internet. It is connected to the E1000 but has limited access. All passcodes are correct...all settings are good. It has connected in the past but once in a while you have to force it to connect. Now it won't access the web, even thought the radio is connected
I have Verizon service for all 3 TV., Fios, and phone. I was told I need to keep their router for my cable service. It is a weak G router. I bought a Cisco E1000 Nband router. Turns out the IP address for both is 192.168.1.1 When I try to access my router, it automatically goes to the Verizon router.How can I get to the Cisco router? Aside from ,resetting it and running the setup disk?
I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
