Linksys Wireless Router :: Internet Access Kicks Off On E1000
Feb 10, 2012
I have an ADSL modem connected to a Cisco E-1000 router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.
I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail.
View 3 Replies
ADVERTISEMENT
Apr 10, 2012
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies
View Related
Dec 19, 2012
I got a refurbished E1000, has been great.
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it. NOW my HP laptop shows my router connected, BUT will not access internet.
View 3 Replies
View Related
Sep 12, 2012
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
View 2 Replies
View Related
Apr 10, 2012
Linksys E1000 running on Window XP
Trying to access the internet with a dell laptop after my daughter messed with the router. She gave me the passowd but when I try to log in from the laptop that has never been logged on since the pw changed, I get a message that wants the network key. I have read several posts about getting the network key but didn't see a network key.I have cisco connect on a different computer and can access the details of the router but haven't found the network key. I can get to Wireless, Wireless Security and the security mode is WPA2/WPA. I can see the password but where is the network key?
View 2 Replies
View Related
Jul 17, 2011
Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
By the way, I'm using E-1000 v2.1.02
View 1 Replies
View Related
Aug 3, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 3 Replies
View Related
Oct 25, 2012
we have cable internet, the service has been going in and out for months now. Bought a new router still having problems. Cable company has been out several times, changed modem, etc. Now hooked up straight to cable with no router, working fine so far, but no wifi , kicks off when router is connected. In the past when router is on it will work for a few hours or even a day or two, then go out.
View 1 Replies
View Related
May 25, 2012
I have 2 laptops...a Compaq Presario (wireless b/g) running Win Xp and A Dell Vostro (wireless n) running Win 7 Pro. No problem with the Win XP but the Win 7 refuses to access the internet. It is connected to the E1000 but has limited access. All passcodes are correct...all settings are good. It has connected in the past but once in a while you have to force it to connect. Now it won't access the web, even thought the radio is connected
View 8 Replies
View Related
Sep 17, 2011
I have Verizon service for all 3 TV., Fios, and phone. I was told I need to keep their router for my cable service. It is a weak G router. I bought a Cisco E1000 Nband router. Turns out the IP address for both is 192.168.1.1 When I try to access my router, it automatically goes to the Verizon router.How can I get to the Cisco router? Aside from ,resetting it and running the setup disk?
View 1 Replies
View Related
Sep 22, 2011
I have a Linksys E1000 router. The firmware is 2.1.00 Build 7 August 30, 2010. I would like to turn on or enable the guest access function. I have gone to 192.168.1.1, and do not find anything there about guest access. At the Wireless tab, the choices are Basic Wireless Setting, Wireless Security, Wireless MAC filter, and Advamced Wireless Setting. Tfhan
View 9 Replies
View Related
Oct 10, 2011
I want to disable the guest access connection on E1000 wireless router but this option is not in the firmware menu. So, now I read that I need to use Cisco Connect on the CD to change this feature. When I run the Cisco Connect software, it says it can't configure the router (probably because I already have it configured). Why doesn't the Cisco Connect software simply take me to the settings where I can change the guest access feature? Why does it try to re-configure the router? Whoever designed this at Cisco was probably smokin some medical MJ because it doesn't make any sense that I have to go through so many hoops to do something so simple.
View 8 Replies
View Related
Jan 24, 2013
I have a 2wire wireless router and I would like to connect the e1000 in another room as a AP(access point).
View 2 Replies
View Related
Jan 6, 2012
I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
View 3 Replies
View Related
Aug 25, 2011
How do I restrict wireless user from accessing download sites that slow my network?
View 1 Replies
View Related
Apr 28, 2013
In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys:
method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2 and DHCP off and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
In my daughters building where I need it, I cannot get the E1000 to work as an access point. The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
When i try the E1000 in either method I get no internet connection on devices connected hardwired or wirelessly to the E1000. Before each setup I used the reset button and the factory defaults tab
method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
Why I cannot connect to the internet in this way behind the Airlink primary router.
View 4 Replies
View Related
Jun 30, 2011
my brand new Linksys E1000 wireless router. I am really struggling and cannot figure out what I am doing wrong.
I live in The Netherlands, have a modem (DSL I think...) and can connect wired through the modem with no problems.
I installed the E1000 with the CD, followed all the steps and my laptop is finding the network. However, it's only local, no internet and I don't understand why. Have tried to connect (wired) my computer to the E1000 and the E1000 to the modem but that doesn't work either.
View 2 Replies
View Related
Aug 3, 2011
Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required). Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely. The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.
View 2 Replies
View Related
May 28, 2012
cannot conect to the internet with my e1000 wirele
View 1 Replies
View Related
Oct 19, 2012
Every two or three days I'm unable to reconnect to my wifi network when I turn on my Windows 7 laptop or Android tablet. I have to power cycle the wifi router to get the connection again. This usually happens after I haven't used either device for a day or two. The connection usually does not drop when I'm using them. Restarting the computer or the tablet does not work and using the Windows troubleshooter (or the android app for wifi issues on the tablet) also doesn't work. Both computer and tablet recognize the network and say the signal is strong but won’t connect to it. There are no physical obstructions. I have no problem with my internet connection (cable modem). The problem really seems to be with the wifi router.
Model name: Linksys E1000
Model number: E1000
Firmware version: 2.1.02 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11069.2
Connection type (WAN): DHCP
View 2 Replies
View Related
Jun 26, 2012
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
View 4 Replies
View Related
Jul 13, 2011
Why my internet was so slow .90mbps. They got on my mac and changed the Ethernet setting to "manually" instead of "Automatic", then changed the speed to 10mbps instead of "autoselect". Now the internet is going at the 10mbps im supposed to be getting, but when i plug it into my router (wall>router>laptop) i get the .90mbps again. So do i how do i change the same setting on the router?
View 1 Replies
View Related
Sep 3, 2011
I recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?
View 1 Replies
View Related
Aug 13, 2011
I have a Cisco E1000 v2. I updated to the latest Firmware 05/25/2011Ver.2.1.02 (Build 5).
Before doing this update I did get 300mbps N speeds. Now I don’t using the same settings, it max out at 144mbps speed. Also the router only seems to get B speeds when using a channel other than 11. I did do a hard reset after the firmware update.
View 1 Replies
View Related
Jul 26, 2010
I have the router plugged in for internet but do not know the password for the wireless connection. i am running a mac.
i have also tried using the standard admin or password as passwords to get in and am unable too.
View 9 Replies
View Related
Dec 25, 2011
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 2 Replies
View Related
Sep 3, 2010
If I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies
View Related
May 11, 2012
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies
View Related
Oct 1, 2010
I just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies
View Related
Dec 17, 2011
I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.
View 2 Replies
View Related
Aug 17, 2011
I have a linksys e1000 modem router as the wireless internet connection in my home, now I bought a new one linksys e1000 to use it as an access point to cover the uncovered area, How can I do that?
View 1 Replies
View Related
Jun 10, 2011
My modem CAN connect to the Internet but my router CANNOT. I've called my ISP (Brighthouse) and went through a whole process of bypassing the router, restarting the modem for 2 minutes, and restarting the router for 30 seconds. Then I even got assistance from the router's maker (Linksys) by switching the IP address of the router, they said this could be the issue if my modem had the same IP address. I switched it to 192.168.2.1, but still no luck. I do not know what to do now. The new router is a Linksys E1000. I haven't got the specs of my modem yet.
View 3 Replies
View Related
Dec 14, 2011
I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.
View 6 Replies
View Related
