Linksys Wireless Router :: E1000 - Access Point Behind Airlink AR675W

In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys:

method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2  and  DHCP off  and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
 
In my daughters building where I need it, I cannot get the E1000 to work as an access point.  The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
 
When i try the E1000 in either method  I get no internet connection on devices connected hardwired or wirelessly to the E1000.  Before each setup I used the reset button and the factory defaults tab

method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.

Why I cannot connect to the internet in this way behind the Airlink primary router.