I have a Linksys E1000 router. The firmware is 2.1.00 Build 7 August 30, 2010. I would like to turn on or enable the guest access function. I have gone to 192.168.1.1, and do not find anything there about guest access. At the Wireless tab, the choices are Basic Wireless Setting, Wireless Security, Wireless MAC filter, and Advamced Wireless Setting. Tfhan
View 9 Replies
I want to disable the guest access connection on E1000 wireless router but this option is not in the firmware menu. So, now I read that I need to use Cisco Connect on the CD to change this feature. When I run the Cisco Connect software, it says it can't configure the router (probably because I already have it configured). Why doesn't the Cisco Connect software simply take me to the settings where I can change the guest access feature? Why does it try to re-configure the router? Whoever designed this at Cisco was probably smokin some medical MJ because it doesn't make any sense that I have to go through so many hoops to do something so simple.
View 8 Replies View RelatedHow do I reenable guest access on my e2000 without having cisco connect installed?
View 1 Replies View RelatedI switched from comcast to att uverse. I was happy about the guest-access feature of E3000 when using the comcast, where I can directly connect my e3000 to the modem (basically you can see two network, one is XXX, the other is XXX-guest). However, the ATT uverse has a gateway that combines the modem and router together, in order to use my e3000 instead of the built-in router of the gateway, I have done a LAN-to-LAN connection and I can access internet without any problem. But in this case, I can not enable my guest-access feature. When I use Cisco Connect to set up e3000, it says "cannot connect to your router". how to set up the guess-access feature of e3000 when using ATT uverse.
View 3 Replies View RelatedMy guest can't use my wireless network and I can not add more devices like a ipad2. Got a new ipad2 for my son for Christmas been trying to set it up for Christmas, so on Christmas day I am not trying to do the set up. My problem is I can not get it to log on to the network. I have been putting in the same pass word all my other computers in the house use but it will not work...
View 2 Replies View Relatedwhere to find my guest user password
View 1 Replies View RelatedIs there a way to get rid of the guest network on a E1000 or is it part of the setup.
View 1 Replies View RelatedJust bought myself an Cisco E1000 today and I am having problems figuring out what the "Guest" password is, how to change it and how to possibly disable it all together?.
The Cisco CD can't access my router now claiming i changed the admin password, which I havent done at all.
But is there some way to manually get access to said password, change it and/or disable guets access all together
I have an E1000 router that's been fine until a few weeks ago. I have access but my guests are unalbe to get access. One of my guests looks like she's connected but can't acess the internet.
View 1 Replies View RelatedI used Cisco connect to set up guest access with a secure password. Cisco Connect now indicates guess access is allowed and shows the password. However, when I actually try to connect to the guest network, it shows no security at all, and I can join the network without a password.
View 1 Replies View RelatedThe Cisco E1000 I just purchased provides two connections: a main connection, and one for "guest access." I've successfully disabled the need for password on the main, but the guest access still requires that I assign a password. How do I make this connection open and accessible as well?
View 4 Replies View RelatedI just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies View RelatedHaving just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies View RelatedI have sent up a wireless network in a large building using WAG120N Modem Router and four E1000 wireless routers set as access points. The E1000's have the DHCP switched off to enable roaming so the WAG120N takes care of all that.
View 1 Replies View RelatedI have an EA6500 wireless router and i have to constantly disable / enable the guest wireless access to get it working again. It might work some time less than a day but then it fails. I tried to set the wireless channel manually instead of auto and the same issue is happening. The private wireless ssid works just fine. I have the latest firmware.
View 9 Replies View Relatedenable security with linksys e1000. it has a password key before but it automatically disabled.
View 1 Replies View RelatedI have 2 laptops...a Compaq Presario (wireless b/g) running Win Xp and A Dell Vostro (wireless n) running Win 7 Pro. No problem with the Win XP but the Win 7 refuses to access the internet. It is connected to the E1000 but has limited access. All passcodes are correct...all settings are good. It has connected in the past but once in a while you have to force it to connect. Now it won't access the web, even thought the radio is connected
View 8 Replies View RelatedI have Verizon service for all 3 TV., Fios, and phone. I was told I need to keep their router for my cable service. It is a weak G router. I bought a Cisco E1000 Nband router. Turns out the IP address for both is 192.168.1.1 When I try to access my router, it automatically goes to the Verizon router.How can I get to the Cisco router? Aside from ,resetting it and running the setup disk?
View 1 Replies View RelatedHow do I find the guest password for a Cisco linksys e1000, actually trying to hook up apple TV and have forgot the main non guest password?
View 2 Replies View RelatedI have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies View RelatedI got a refurbished E1000, has been great.
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it. NOW my HP laptop shows my router connected, BUT will not access internet.
I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.
View 2 Replies View RelatedI have a 2wire wireless router and I would like to connect the e1000 in another room as a AP(access point).
View 2 Replies View RelatedI have an ADSL modem connected to a Cisco E-1000 router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.
I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail.
I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
View 3 Replies View RelatedLinksys E1000 running on Window XP
Trying to access the internet with a dell laptop after my daughter messed with the router. She gave me the passowd but when I try to log in from the laptop that has never been logged on since the pw changed, I get a message that wants the network key. I have read several posts about getting the network key but didn't see a network key.I have cisco connect on a different computer and can access the details of the router but haven't found the network key. I can get to Wireless, Wireless Security and the security mode is WPA2/WPA. I can see the password but where is the network key?
How do I restrict wireless user from accessing download sites that slow my network?
View 1 Replies View RelatedIn my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys:
method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2 and DHCP off and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
In my daughters building where I need it, I cannot get the E1000 to work as an access point. The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
When i try the E1000 in either method I get no internet connection on devices connected hardwired or wirelessly to the E1000. Before each setup I used the reset button and the factory defaults tab
method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
Why I cannot connect to the internet in this way behind the Airlink primary router.
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.
By the way, I'm using E-1000 v2.1.02
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 3 Replies View RelatedThe guest network on the router keeps going down. It can be seen but it cannot be connected to. Sometimes it works for a day or 2 and then it doesn't. I have to constantly babysit the network and it is entirely frustrating because the only fix is to reboot the router.I have tried factory resetting several times.I have tried re-flashing the fw.I'm using the non-CCC fw because CCC had way, way too many issues.These routers have been out for months and many people have been having issues and somehow Cisco doesn't see fit to work on firmware that stabilizes them at all? It's like, they release a router and then forget about it - the next batch comes along, often the same guts with a different shell and it's the same thing over again. I had a WRT610N and I said I'd never buy another Cisco after that but I broke my rule because of being lured by these "App enabled" features, which mind you have nothing at all over the competition since the CCC doesn't even work for most people.
View 9 Replies View RelatedPurchased E3200 and did simple setup via CD setup (Cisco connect). Set up main name and password. Cisco Connect assigned "-guest" to end of main name for the guest account. Gave guest account its own password. Both main and guest accounts were broadcasting OK -- but guest account was not secure and could be accessed without password. (All software and firmware upgrades were done during initial setup).Reset the E3200 and restarted things from the CD setup. Created main account, main account password, and guest password again. In advanced settings, left basic wireless settings at initial settings, changed wireless secutiy to WPA2 Personal. Still having the guest account being broadcast in unlocked status. (Have turned off guest access for now until I can get password protection for it).
View 2 Replies View Related
