Linksys Wireless Router :: Enable Guest Access On E2000?

Feb 12, 2013

How do I reenable guest access on my e2000 without having cisco connect installed?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Enable Guest Access On E1000

Sep 22, 2011

I have a Linksys E1000 router. The firmware is 2.1.00 Build 7 August 30, 2010. I would like to turn on or enable the guest access function. I have gone to 192.168.1.1, and do not find anything there about guest access. At the Wireless tab, the choices are Basic Wireless Setting, Wireless Security, Wireless MAC filter, and Advamced Wireless Setting. Tfhan

View 9 Replies View Related

Linksys Wireless Router :: How To Enable Guest Access Feature Of E3000

Dec 30, 2012

I switched from comcast to att uverse.  I was happy about the guest-access feature of E3000 when using the comcast, where I can directly connect my e3000 to the modem (basically you can see two network, one is XXX, the other is XXX-guest). However, the ATT uverse has a gateway that combines the modem and router together, in order to use my e3000 instead of the built-in router of the gateway, I have done a LAN-to-LAN connection and I can access internet without any problem. But in this case, I can not enable my guest-access feature. When I use Cisco Connect to set up e3000, it says "cannot connect to your router". how to set up the guess-access feature of e3000 when using ATT uverse.

View 3 Replies View Related

Linksys Wireless Router :: E2000 Can Only Connect Through Guest Account

May 31, 2010

I have an E2000 setup with the Cisco Connect Utility.  I have a MAIN account and a GUEST account setup.I'm recently having a problem where I can only connect wireless through the "Guest" account.  I can connect to my MAIN account, but it states that I have "Limited Access".

View 9 Replies View Related

Linksys Wireless Router :: E2000 With Extended Guest-WLAN

Jul 16, 2011

I tried to extend the Range of the Guest WLAN of the E2000 with several different Access Points vom TP-Link. (Last try: TL-WA901D) The Access Point recognises the WLAN and sometimes it has a connection for a short time. But then the whole WLAN is breaking down, sometimes the Router E200 hangs up, also with the LAN connections. The E200 is connected to a sky-DSL Router and works fine when no additional access point is connected. In the web-Interface of the E2000 I cant setup any specific Guest-WLAN settings.

View 1 Replies View Related

Linksys Wireless Router :: Guest / User Authentication E2000?

Jul 7, 2011

E2000 has the guest account feature.  Not sure if all guests shares the same login credentials.  I would like to have guests account use seperate logins.  Is this feature available?  Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed.  I am looking for more than 10 - kinda like a hotspot software.
 
I've been looking everywhere.  I've seen hotspot system, ddwrt, chillspot, etc.  But it's complicated as firmware needed to be flashed.

View 1 Replies View Related

Linksys Wireless Router :: Guest Network And Mac Filtering On E2000?

Feb 12, 2011

Is it true that if someone wants to connect to the Guest network and macfiltering is on this is not possible. Which makes the guest network basicly useless.

View 5 Replies View Related

Linksys Wireless Router :: E2000 Logon Guest Password?

Jul 15, 2011

How do I find the guest logon password?

View 3 Replies View Related

Linksys Wireless Router :: PSP Won't Connect To Main Or Guest - E2000

Dec 6, 2010

We have been unable to connect our PSPs to the new E2000, and after several hours we're ready to throw in the towel and go get a different router!The PSPs only see the "guest" connection when using the scan option, but cannot connect to it. Even after manually adding both the main and the guest info we are STILL unable to connect either of the PSPs We had an older router from your company which we had no issues connecting 6 desktops, a lappy, 2 psp, 2 ds, 2 xbox 360, and a Wii, as well as our smart phones. After this recent "upgrade" to the E2000 the PSPs CANNOT connect no matter what we do. It gives many different error messages.

View 9 Replies View Related

Linksys Wireless Router :: E2000 / Add Guest Without Cisco Connect Software

Oct 30, 2011

How do I add a guest without the cisco connect software since they don't have upgrade for osx lion.

View 3 Replies View Related

Linksys Wireless Router :: E2000 / Limit Bandwidth Speed Of Guest Accounts?

Jul 7, 2011

How can I limit bandwidth speed of guest accounts? Or are there free softwares available to do something like that? It's kinda like the hotspot softwares - where we can set hourly, daily, monthly allowances and see a report on their connectivity.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 - Guest Acess Disable / Enable Constantly

Apr 9, 2013

I have an EA6500 wireless router and i have to constantly disable / enable the guest wireless access to get it working again. It might work some time less than a day but then it fails. I tried to set the wireless channel manually instead of auto and the same issue is happening. The private wireless ssid works just fine. I have the latest firmware. 

View 9 Replies View Related

Linksys Wired Router :: E2000 / E3000 - How Many Guest Clients Allowed In A Day

Jan 26, 2011

I would like to put an E2000 in an office where clients are coming and going throughout the day.  When the documentation says that there is a maximum of 10 guest network users allowed (with a default setting of 5) what exactly does that mean ?   I don't want the first 10 guest-clients who come in, connect to the guest network, then leave the office to consume all 10 slots for the day.If I have 50 people that come and go from the office throughout the day who connect to the guest 192.168.33.X network and attempt to enter the password (but no more than 10 guests authenticated at any given time) will all 50 be successful in connecting ?  Or do I have to reduce the Client Lease Time to something less than the default setting of one day ?

View 1 Replies View Related

Linksys Wireless Router :: E2000 WAN IP Address Cannot Be Same Subnet As Guest Network IP Address

Jul 16, 2011

I switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.

View 2 Replies View Related

Linksys Wireless Router :: E2000 - Access Restriction Shuts Down Access To All Computer

Jan 1, 2013

I have set up access restriction times for my son (we have wireless access for all systems).  I use the MAC address on his systems. Xbox, Kindle Fire and his Laptop. The MAC address are Correct. Here is the problem:
 
I set the "allow" and times from 6pm - 11:00 pm (while on xmas vacation) - the system works for a while he is shut off as i would like but....
 
After a period of time the entire house goes off line. I have to reboot the power on e2000 router and then disable the access restrictions. System then works. Problem is repeatable. What is the deal. I have updated firmware already. Otherwise the system works great. Never dies. Just when i set access restricions for a SPECIFIC time it kills entiore houese. BTW i can deny him outright 24/7 and the system idsables his access fine. Its just when i set specific times

View 3 Replies View Related

Linksys Wireless Router :: Can't Access Internet Through E2000

Apr 21, 2013

I have a Linksys E2000.
 
It worked fine until one day, without any change at all, it simply stoped working. I mean, I can still connect through my wifi laptop connection (it shows connected to my router and says that I have an excelent signal). But, I can't reach the internet. But, If I unplug the internet cable, and plug it in my laptop, the connection works fine. A friend told me that this could be caused intentionally by the internet provider, that they would block my signal to avoid me using a wireless router, trying to force consumers to sign their own wireless service. Thus, by this friend advice, I've cloned my laptop's MAC address to the router. It didn't work either.

View 4 Replies View Related

Linksys Wireless Router :: Cannot Access Website Through E2000

Nov 12, 2011

I got a refurbished E2000 on Amazon. Last night I set it up and when I tried accessing this website [URL], I could not connect to the server. First I thought it's the server problem and let it go. This morning it's the same probelm. I called my local cable technician and he told me it's the wifi router is blocking the website. I called the CISCO guys and they refused as it was out of warranty.

View 2 Replies View Related

Linksys Wireless Router :: Internet Access Regarding Linksys E2000

Aug 21, 2011

I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).

View 9 Replies View Related

Linksys Wireless Router :: E2000 - Unable To Access Web Setup

May 12, 2012

Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.

View 1 Replies View Related

Linksys Wireless Router :: Using An E2000 As Repeater / Access Point?

Aug 3, 2011

We have a wireless network and would like to extend the range for it and I was told that a E2000 could be setup to extend the range.If we say that our existing wireless network has the SSID network1, can the E2000 be setup so that it is connected to a LAN socket and then wok as a wireless runter with the same SSID (network1) so that pc's can connect easily ?Or must the two wireless routers be connected with a dedicated cable ?Or must I setup the new E2000 up as a new wireless network with a new SSID like network2 ?

View 3 Replies View Related

Linksys Wireless Router :: E2000 Not Allowing Access To Other Devices

Nov 5, 2011

I just set up my e2000 on a PC using Windows 7.  I am additionally trying to set up additional devices on the network.  The two that I am currently working with are:Dell Latitude d240 running Windows XP.HTC Evo smartphone running Android
 
I can't get these on the network through the e2000.  They can access the internet through the e2000 but only as a guest and therefore don't have the same level of security.  What do I need to do to successfully put the above devices on the network?

View 2 Replies View Related

Linksys Wireless Router :: E2000 Block All Internet Access?

Mar 12, 2012

E2000 about a years old.One of the rule is to block internet access from 1am to 4am for certain internal IPs.Working fine until a week ago. Once the time kick in, the E2000 will not route any internet access for any internal IP until the unit is power off and power on reboot.If that rule is disabled. then the E2000 will route all days and nights with no problem.Updated firmware to 1.0.0.4 already.I replaced the WRT45 because of the same problem a year ago. Now just about a year, this E2000 keeps blocking all traffic.

View 1 Replies View Related

Linksys Wireless Router :: E2000 Connected To RVS4000 As Access Point

Feb 26, 2012

I use a E2000 as a wireless access point to the Internet, by connecting the LAN of the E2000 (set for x.x.x.5) to the LAN of an RVS4000 (Set for x.x.x.1).  The E2000 is set for Automatic Configuration, and everything works fine..... Until a power failure occurs... Then, after everything boots up again..  I get the "NO INTERNET" prompt on the wireless....
 
By using Ping Plotter, from a computer on wireless end, and another computer with Ping Plotter on the wired side of the x.x.x.1 LAN,  I've determined that it's the E2000 that has disconnected from the RVS4000. 
 
I have found a work-around, though....No matter How the setting boots up, If I toggle away from and then BACK TO: NAT DISABLED in Advanced Routing, Everything is back operational.....  Until the next Power Failure....
 
Is there any way of making this Automatic.
 
In another forum, there was a suggestion of putting the E2000 in Bridge mode in WAN settings... I can't find it....

View 3 Replies View Related

Linksys Wireless Router :: E2000 - Configuring Second One As Repeater Access Point

May 28, 2011

I just purchased 2 E2000 routers at BB and was assured the second one could be configured as a repeater access point. Some current messages indicate this is not possible.Will a Cisco moderator please confirm and clarify repeater options.

View 2 Replies View Related

Linksys Wireless Router :: Turning E2000 Into Access Point / Switch?

Dec 6, 2012

we got a At&T Modem/Router upstairs, and then we got a long ethernet cable running from there to the basement. The problem is that this only allows for one LAN connection at a time (an issue for LAN parties and such). I do have an E2000 Linksys router however and I want to be able to use that as like a switch/access point.I am pretty sure this is possible but I have forgotten all of the steps to do it.The att modem/router is running on 192.168.1.254, and my Linksys which is now directly connected is on 192.168.1.1, so I have a different address in that regards.Do I need to edit my Linksys settings now, or do I have to edit the at&t settings?Also I will be using this for Xbox Live at points so will I need to re-open all those ports up on my Linksys, or at least set the DHCP to the Xbox's static IP to keep my NAT good?

View 2 Replies View Related

Linksys Wireless Router :: E2000 / Remote Desktop Access With Mac And Asus Transformer Prime?

Jul 31, 2011

I have an E2000 router with the most current firmware. I have a Sony VAio laptop with Windows 7 Home Premium 64bit,a Macbook with 10.6.8, and a new Asus Transformer Prime with ICS.My work desktop is a Dell Optiplex 380 with Windows 7 Pro 32bit. I frequently work from home and have no issues remoting into to my work PC from by Sony laptop via VPN and RDP.However I have never been able to connect successfully to my work PC with my Macbook(using Remote Desktop Connection 2.1 for Mac OS) or Asus tablet(using WYSE Pocket Cloud RDP app for Android). I can however connect to the VPN itself on the Macbook and tablet without issue same as my Windows laptop. The other interesting part is I can connect via RDP when I am connected to a Mi-Fi 3g hotspot. So it is definitely something in the my Linksys E2000 blocking the connection for some reason. I have even set Port forwarding of 3389 with the ip's of both the Macbook and Asus tablet.I have also tried connecting via ethernet to the router with the same outcome. I cannot ping my work pc from either device as well.In addition the firewall on my work PC is completely disabled and all services related to Remote desktop access are enabled and running.

View 3 Replies View Related

Linksys Wireless Router :: E2000 Internet Access Is Not Affected When Printer Appears To Be Offline

Jun 10, 2011

I've got a Linksys E2000 router and a Brother MFC-7840W wireless printer and they don't seem to want to play nice together.  The set-up process was fine and I can usually print wireless without a problem, but every so often I'll try to print and my computer will say that the printer is offline.  Other computers on my network also show it as offline. The printer confirms it has an IP address, but even after power cycling it won't be picked up by my machines.  I've even tried a full reset of the printer and re-configured it, at which point it is able to successfully obtain an IP address, but it still shows as offline on my PCs. 
 
The only solution I have found is to powercycle the router.  This always works.  Now that's not a terribly inconvenient workaround most of the time, so I've been doing that for a few months now.  It obviously implicates the router as the point of failure, but wireless internet access is not affected when the printer appears to be offline, so obviously some packets are getting through normally. 

View 3 Replies View Related

Linksys Wireless Router :: EA3500 Guest Access Keeps Going Down

Sep 7, 2012

The guest network on the router keeps going down. It can be seen but it cannot be connected to. Sometimes it works for a day or 2 and then it doesn't. I have to constantly babysit the network and it is entirely frustrating because the only fix is to reboot the router.I have tried factory resetting several times.I have tried re-flashing the fw.I'm using the non-CCC fw because CCC had way, way too many issues.These routers have been out for months and many people have been having issues and somehow Cisco doesn't see fit to work on firmware that stabilizes them at all? It's like, they release a router and then forget about it - the next batch comes along, often the same guts with a different shell and it's the same thing over again. I had a WRT610N and I said I'd never buy another Cisco after that but I broke my rule because of being lured by these "App enabled" features, which mind you have nothing at all over the competition since the CCC doesn't even work for most people.

View 9 Replies View Related

Linksys Wireless Router :: Guest Access On E3200?

Nov 14, 2011

Purchased E3200 and did simple setup via CD setup (Cisco connect).  Set up main name and password. Cisco Connect assigned "-guest" to end of main name for the guest account.  Gave guest account its own password.  Both main and guest accounts were broadcasting OK -- but guest account was not secure and could be accessed without password.  (All software and firmware upgrades were done during initial setup).Reset the E3200 and restarted things from the CD setup.  Created main account, main account password, and guest password again.  In advanced settings, left basic wireless settings at initial settings, changed wireless secutiy to WPA2 Personal.  Still having the guest account being broadcast in unlocked status. (Have turned off guest access for now until I can get password protection for it).

View 2 Replies View Related

Linksys Wireless Router :: E3200 - Trying To Enable Remote Access?

Jan 31, 2013

When I try to enable remote management on my Linksys E3200 I get an "illegal value" message.  Is there something else I need to change

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Allow Unrestricted Guest Access?

Apr 22, 2013

I have an EA4500 wireless router. Would like to allow guest access to the internet without requiring a password. Is this possible, and if so, how? I know how to set the guest password, but it won't let me set it to be blank.

View 5 Replies View Related

Linksys Wireless Router :: EA4500 Guest Access Does Not Connect?

Apr 18, 2013

My EA4500 has the newest firmware and is properly configured to support 20+ wireless and wired devices. It does this job well.Guest Access, however, is a problem. It works for about a day, then stops.Guests can access the login screen and enter the password. Then nothing happens. The screen appears to "load", but it does not connect.I have tried returning to default settings and reconfiguring and reupdating firmware. I have tried turning Guest Access on and off, as well as resetting the password.The only that works is rebooting the router. This is obviously not practical, especially for a contract client.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - No Guest Access With Mac Filter?

Aug 21, 2011

If you have MAC filter enabled with the E4200 Firmware Version: 1.0.01 you cannot connect to guest.   

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved