Using Linksys E1000 Modem Router As An Access Point?

Aug 17, 2011

I have a linksys e1000 modem router as the wireless internet connection in my home, now I bought a new one linksys e1000 to use it as an access point to cover the uncovered area, How can I do that?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Connecting E1000 As Access Point

Jan 24, 2013

I have a 2wire wireless router and I would like to connect the e1000 in another room as a AP(access point). 

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Access Point Behind Airlink AR675W

Apr 28, 2013

In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys:

method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2  and  DHCP off  and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
 
In my daughters building where I need it, I cannot get the E1000 to work as an access point.  The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
 
When i try the E1000 in either method  I get no internet connection on devices connected hardwired or wirelessly to the E1000.  Before each setup I used the reset button and the factory defaults tab

method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.

Why I cannot connect to the internet in this way behind the Airlink primary router.

View 4 Replies View Related

Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?

Nov 1, 2012

How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.

View 1 Replies View Related

Linksys Access Point :: WAP54G Can't Connect To Cisco E1000 - Error 22?

Mar 3, 2011

For two years I had a 2-Wire home portal from AT&T for my DSL line.  I also have DirecTV with a DVR that has an ethernet port to download video on demand from the internet.  I bought a Linksys WAP54G to use as a pass-thru to the DVR and it has worked perfectly for the entire time.  I remember that the setup was a nightmare, so I saved the settings in case I lost them.
 
when I connected the new E1000 router to a Netopia DSL modem, I decided to reconfigure the WAP to use the new router.  I recovered the configuration file and the only thing that I had to change was the MAC address for the new router which I used with the Linksys' web-based setup tool.  I used the network discovery and selected the new router. All of the settings including the router name, default gateway, and static address for the WAP54G were the same.But, when I go to the setup page for the DirecTV DVR and perform a network test, I get an OK connect to the local network, but an error22 and fail to connect to the Internet.  Of course, going to the help page on the DVR for that error only gives the lame troubleshooting such as, is the router plugged in? Is the ethernet cable connected? etc.
 
I know that when I had to set it up with the original 2-wire portal, I had a lot of tweaking to do in the advanced wireless settings.  I'm trying to setup using the WAP54G as a pass-thru bridge for DirecTV. 

View 1 Replies View Related

Linksys Access Point :: E1000 Determine Best Option For Extending Home Network

Dec 27, 2012

I am trying to determine the best option for extending my home network. I am currently running an E2000 as my router and am considering the purchase of a Valet Plus to use as only an Access Point. Alternatively I have a used E1000 in good condition. Which would be best for use as an Access Point only?

View 1 Replies View Related

Moved To A New Location With A Dsl Modem And Transferred Macbook And Linksys Router E1000 V2?

Dec 1, 2012

I recently moved to a new location with a dsl modem and transferred my macbook and lynksis router E1000 v2.

View 3 Replies View Related

Modem Router Access Point Setup?

May 15, 2012

I bought the DIR 655 to put into our network as the Netopia wireless fails to connect even though we have maximum signal strength. Att advised that buying a third party router would solve this problem.I did manage to almost configure the DIR 655. I would have to connect it to the system to test it[CODE]

View 5 Replies View Related

Linksys Wireless Router :: E1000 Connected To Modem Via Ethernet Cable Produces 16.0 Speeds

Jan 18, 2012

I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get  reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?

View 1 Replies View Related

Linksys Wireless Router :: E1000 / Arris TM502G Modem - Extremely Slow Network Speed

Aug 6, 2011

I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
 
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
 
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
 
My ISP is comcast and I have a Arris TM502G modem

View 4 Replies View Related

Connection Between Access Point / Router / Or Cable Modem And The Internet Is Broken?

Aug 26, 2012

The detected problem is the connection between my access point, router, or cable modem and the Internet is broken.The network gateway is accessible, but Windows couldn't receive network traffic from the Internet.All other devices (iPad, Xbox, android phone) have no problem connecting to the Internet.Desktop is the only one experiencing the connection issue.

View 1 Replies View Related

Connection Between Access Point / Router Or Cable Modem - Internet Broken

Jan 31, 2012

My laptop died last week and have been using my husbands, which I hate! We had some issues with computer freezing on some webpages or after being on webpages for awhile (like facebook). Yesterday it froze and I could not get it back on. When he got home he did scan disk (which I also did) and got it working after going into safe mode and doing system restore. He said an update had gotten through and messed things up. Anyhow, after he was on it a few hours last night, we lost connection. I figured the crazy weather was the culprit but it has been off all day. Our router is working and connecting but the adapter is not. Also our home phone says there is no line. We have unplugged everything several times, checked to make sure everything is in the right spots, I have even reset the router and rebooted the adapter. I uninstalled and restalled the adapter also. It is now telling me that "the connection between your access point, router, or cable modem and the Internet is broken". The only lights I have on the adapter are power, battery, DS and now the US light is blinking. The online and link lights are not on.

View 3 Replies View Related

Linksys Wireless Router :: Windows 7 Cannot Access Web Using E1000

May 25, 2012

I have 2 laptops...a Compaq Presario (wireless b/g) running Win Xp and A Dell Vostro (wireless n) running Win 7 Pro.  No problem with the Win XP but  the Win 7 refuses to access the internet.  It is connected to the E1000 but has limited access.  All passcodes are correct...all settings are good.  It has connected in the past but once in a while you have to force it to connect.  Now it won't access the web, even thought the radio is connected

View 8 Replies View Related

Linksys Wireless Router :: Cisco E1000 - Can't Access It

Sep 17, 2011

I have Verizon service for all 3 TV., Fios, and phone. I was told I need to keep their router for my cable service. It is a weak G router. I bought a Cisco E1000 Nband router. Turns out the IP address for both is 192.168.1.1   When I try to access my router, it automatically goes to the Verizon router.How can I get to the Cisco router? Aside from ,resetting it and running the setup disk?

View 1 Replies View Related

Linksys Wireless Router :: Enable Guest Access On E1000

Sep 22, 2011

I have a Linksys E1000 router. The firmware is 2.1.00 Build 7 August 30, 2010. I would like to turn on or enable the guest access function. I have gone to 192.168.1.1, and do not find anything there about guest access. At the Wireless tab, the choices are Basic Wireless Setting, Wireless Security, Wireless MAC filter, and Advamced Wireless Setting. Tfhan

View 9 Replies View Related

Linksys Wireless Router :: E1000 Connected To DSL / No Internet Access

Apr 10, 2012

I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!

View 3 Replies View Related

Linksys Wireless Router :: Reset E1000 Now Can't Access Internet

Dec 19, 2012

I got a refurbished E1000, has been great.
 
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it.  NOW my HP laptop shows my router connected, BUT will not access internet.  

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Unable To Get Internet Access

Sep 12, 2012

I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.

View 2 Replies View Related

Linksys Wireless Router :: Disable Guest Access On E1000?

Oct 10, 2011

I want to disable the guest access connection on E1000 wireless router but this option is not in the firmware menu.  So, now I read that I need to use Cisco Connect on the CD to change this feature.  When I run the Cisco Connect software, it says it can't configure the router (probably because I already have it configured).  Why doesn't the Cisco Connect software simply take me to the settings where I can change the guest access feature?  Why does it try to re-configure the router?  Whoever designed this at Cisco was probably smokin some medical MJ because it doesn't make any sense that I have to go through so many hoops to do something so simple.

View 8 Replies View Related

Linksys Wireless Router :: Internet Access Kicks Off On E1000

Feb 10, 2012

I have an ADSL modem connected to a Cisco E-1000 router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.
 
I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail. 

View 3 Replies View Related

Linksys Access Point :: WRT54G - Unable To Find Access Point In Home Network

Aug 29, 2009

I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1.  My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
 
I found directions in the forum for a setup using the LG BD390  but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold  from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
 
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi. 

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP

Jun 26, 2012

I installed an IP camera, and had to change my E1000 router settings to a static IP address.  Now I can't access the router settings.  192.168.1.1 is still the default gateway, but it won't open in any browser.
 
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place.  I'm not very good at this stuff, and it's a small miracle that I did it once.  

View 4 Replies View Related

Linksys Wireless Router :: Need Access E1000's Web-based Setup Page

Jan 6, 2012

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Network Key For Laptop To Access Internet?

Apr 10, 2012

Linksys E1000 running on Window XP
 
Trying to access the internet with a dell laptop after my daughter messed with the router. She gave me the passowd but when I try to log in from the laptop that has never been logged on since the pw changed, I get a message that wants the network key. I have read several posts about getting the network key but didn't see a network key.I have cisco connect on a different computer and can access the details of the router but haven't found the network key. I can get to Wireless, Wireless Security and the security mode is WPA2/WPA. I can see the password but where is the network key?

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Restrictions To Access Download Sites?

Aug 25, 2011

How do I restrict wireless user from accessing download sites that slow my network?

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Doesn't Have Internet Access On Private Network

Jul 17, 2011

Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.

By the way, I'm using E-1000 v2.1.02

View 1 Replies View Related

Linksys Wireless Router :: Home Network E1000 Setup Without Internet Access?

Aug 3, 2011

Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?

View 3 Replies View Related

Linksys Access Point :: WAP54G Access Point Setup After A Reset?

Jul 9, 2006

I had to reset my access point but the login screen fails to appear to lock the router.  I don't have the setup wizard disk.

View 9 Replies View Related

Linksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point

Jan 17, 2013

I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?

View 1 Replies View Related

Linksys Access Point :: WRT320N Access Point Vs Range Extender

Dec 14, 2011

Have a WRT320N router at one end of the house in the basement.  Would like to boost signal to other end of the house.  Which product should i use, an access point or a range extender?  My house is also wired with Ethernet cable and I could plug the access point into an Ethernet port at the end of the house where the signal is weak.

View 1 Replies View Related

Linksys Access Point :: WAP4410n MIBs Or OIDs For Access Point

Jul 3, 2012

I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?

View 1 Replies View Related

Linksys Access Point :: WAP54G Access Point Unable To Connect To More Than One PC?

Apr 25, 2011

I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
 
 The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
 
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
 
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.

View 3 Replies View Related

Turning Modem Into Access Point

Jan 1, 2013

My modem and rotuer have double NAT. I am not the only one in my house so I can't mess with the router a lot, but turning the NAT off in my modem and assigning the new IP to my static IP router, by turning off DHCP in the router. Will make my modem a access point.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved