Moved To A New Location With A Dsl Modem And Transferred Macbook And Linksys Router E1000 V2?
Dec 1, 2012I recently moved to a new location with a dsl modem and transferred my macbook and lynksis router E1000 v2.
View 3 Replies
ADVERTISEMENT
Linksys Wireless Router :: E1200 Bridge - Moved To New Location 150 Feet Away And It Will Not Work?
Aug 5, 2012I was successful in configuring a new e1200 in bridge mode to extend my network. I did this with the routers side by side. In then moved the e1200 to a new location 150 feet away and it will not work. I previously had this working with an older linksys router. It will not deliver a Internet connection.
View 8 Replies View RelatedUsing Linksys E1000 Modem Router As An Access Point?
Aug 17, 2011I have a linksys e1000 modem router as the wireless internet connection in my home, now I bought a new one linksys e1000 to use it as an access point to cover the uncovered area, How can I do that?
View 1 Replies View RelatedLinksys Wireless Router :: E1000 Connected To Modem Via Ethernet Cable Produces 16.0 Speeds
Jan 18, 2012I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?
View 1 Replies View RelatedLinksys Wireless Router :: E1000 / Arris TM502G Modem - Extremely Slow Network Speed
Aug 6, 2011I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
My ISP is comcast and I have a Arris TM502G modem
Linksys Cable / DSL :: WAG54G2 Data Will Be Transferred Over Internet
Jan 9, 2012I have two LAN networks. Both using LINKSYS WAG54G2 Wireless + Gateway. I can create a VPN tunnel between the two networks to connect them. But since the data will be transferred over the internet, I want to know how safe it is. Is there anyway i can make it more secure?
View 3 Replies View RelatedLinksys Wireless Router :: Macbook Air Slow With E1200?
Mar 25, 2012I just got a Macbook Air and couldn't get connected at home so I went and bought a new router (our other router was old!!). We purchased the E1200. Our Dell desktop seems to have a fine connection, but my MacBook Air and my husbands laptop are really slow when on the internet.
View 1 Replies View RelatedLinksys Wireless Router :: How To Connect MacBook Pro To WRT160N
Dec 2, 2009I just bought a Linksys WRT160N router. I pop the installation disk in my mac book pro and walk thru the installation procedure successfully.But I can't connect wirelessly from my MacBook Pro (running mac os x 10.5).It sees the router and I did type in the password correctly (i copy from the text file generated by the installation procedure), but I keep getting 'coonnection timeout'.
View 9 Replies View RelatedLinksys Wireless Router :: E2000 - MacBook Constantly Not Getting IP?
Jul 2, 2011I have the Linksys E2000 and set it up on MacBookPro no problems. My iPhone 3G and my gf's iPhone4 connect no problem. Also, I have an XBox 360 connected via ethernet cable. Her MacBook however is constantly not getting an IP. I set her up with an EZ Key, but every time she connects we have to go through the EZ key process where I run Cisco Connect from my laptop. Why can't she just log in every time? This is frustrating me as all other aspects of this router work fine. I had her plugged into it as well with no problems. Again, it works after a dual computer Cisco Connect cycle, but my computer isn't always home.
View 1 Replies View RelatedLinksys Wireless Router :: Macbook Pro And 5.8 Ghz Channel On WRT610N?
Feb 17, 2010Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N. I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel. Linksys support told me that the hardware was not compatible with the high channel.
View 3 Replies View RelatedLinksys Wireless Router :: E3200 Cannot Be Detected On MacBook Pro
May 2, 2012I am using the E3200 in a bridge mode to my uverse wifi router, since the E3200 has 5ghz and my uverse router doesn't. every week or so, I would not be able to detect the E3200 on my Mac Book Pro (I only enabled 5ghz on the E3200), but I can connect to the 2.4ghz uverse router, then access the admin page of the E3200 w/o.
View 6 Replies View RelatedLinksys Wireless Router :: MacBook Pro Won't Connect To WRT120N Using 802.11n
Mar 20, 2010I just replaced my WRT54G with a WRT120N. Everything is working fine, but...
My MacBook Pro (about 18 months old) claims to support a/b/g/n, but it only wants to connect using 802.11g. It's running Snow Leopard. The laptop and the router are about 3 feet apart. Is there some incompatibilityin the version of 802.11n they support?
Linksys Wireless Router :: Macbook Can't Find Printer At EA3500
Sep 1, 2012I just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
View 3 Replies View RelatedLinksys Wireless Router :: Macbook 10.8.2 / EA4500 Lossing Connection After Being Idle
Nov 30, 2012My macbook keeps loosing it's wireless connection after being idle, when I start up I have to find my router and highlight it and connect and if it's idle it losers it's connection all the time.I tried resetting the router to default and started over I also tried every imaginable way of saving my password and connection but I can't find a way I've been into the routers security,trouble shooting,wireless, what's not holding it's connection to my MACBOOK? my iphone 5, ipad, and roku all hold
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - Macbook Keeps Losing Connection To NAS Drive
Feb 23, 2012I recently purchased a Linksys e3000 router. Everything is going great except that both my desktop (Windows 7 Machine) and Laptop (Macbook Pro) keep losing the connection to a DLINK 323 Nas drive I have plugged into the router. This is problematic because I keep my itunes library on the NAS drive.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 - Macbook Keeps Losing Connection To NAS Drive?
Sep 15, 2010I recently purchased a Linksys e3000 router. Everything is going great except that both my desktop (Windows 7 Machine) and Laptop (Macbook Pro) keep losing the connection to a DLINK 323 Nas drive I have plugged into the router. This is problematic because I keep my itunes library on the NAS drive.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Reboots Every Time When Use AirPlay From MacBook Pro
Oct 16, 2011I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots. When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot. The E4200 is running firmware 1.0.03.
View 9 Replies View RelatedLinksys Wireless Router :: E3000 / Connect It Wirelessly To A MacBook Running 10.7.2?
Jan 12, 2012I just bought an E3000 router. The Setup that comes in the CD does not support OSX 10.7.2 which is the latest version of the operating system.Is there some way to connect it wirelessly to a MacBook running 10.7.2?
View 3 Replies View RelatedLinksys Wireless Router :: Setting Up MacBook Time Machine With EA4500
Jun 22, 2012How to set up a time machine MacBook Air (Mac OS X 10.7.4) on EA4500 (2.0.37) with the disk WD MyBook USB 2TbThe disk is divided into two sections 500 and 1500, 500 by the time machine.After the command (defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1) time machine saw the network drives, but can not be backed up (not supported AFP)
View 8 Replies View RelatedLinksys Wireless Router :: E4200 V2 Set Up At New Location?
Apr 12, 2012I will be staying at a rental property that has ethernet cable & modem. If I bring my E4200 v2 router from home & connect it to their modem, will my Toshiba 16GB Thrive be able to access the internet via WiFi? When I initially set up the router, I ran the router CD on my laptop, and the Thrive automatically accessed the internet. Will the Thrive automatically do the same when I connect the router at the new location. There is no computer there to run the router software. Will the the network be secured as it is at home? Same network name & password?
View 1 Replies View RelatedLinksys E2500 Router - Network Security Key Location?
May 11, 2012I have just bought a Linksys E2500 Router and have been asked for the security key to connect to the Internet. Where do I find it and why is this so well hidden?
View 1 Replies View RelatedFind Security Key Location Linksys Wireless Router
Jun 14, 2011How to connect laptop#2 to wireless router when you donot know security key code?
View 2 Replies View RelatedLinksys Wired Router :: RV042 Syslog Location On Machine?
Oct 14, 2011We have a RV042. We have a Debian server on the network.I have activated Enable Syslog on the router and pointed to the Debian Server IP.Where are the logs for the Router saved on the machine?
View 1 Replies View RelatedLinksys Wired Router :: First And Second Location RV042 - VPN Tunnel Configuration?
Jan 14, 2011Setup is two dynamic IP locations
1. first location RV042 is the gateway attached to ADSL modem
2. second location RV042 is behind BT home hub gateway - for now the BTHH DMZ is enabled to the RV042
Followed the user manual config for two dynamic IP but it seems that the RV042 behind the BTHH obviously has a different IP than the resolved IP and is causing problems with connection.
This from the log file:
Jan 14 15:04:16 2011 VPN Log Received Vendor ID payload Type = [Dead Peer Detection]
Jan 14 15:04:16 2011 VPN Log [Tunnel Negotiation Info] <<< Responder Received Aggressive Mode 1st packet
Jan 14 15:04:16 2011 VPN Log Aggressive mode peer ID is ID_IPV4_ADDR: '192.168.95.139'
Jan 14 15:04:16 2011 VPN Log No suitable connection for peer '192.168.95.139', Please check Phase 1 ID value
Jan 14 15:04:16 2011 VPN Log initial Aggressive Mode packet claiming to be from 81.156.xxx.xx on 81.156.xxx.xx
But no connection has been authorized,check peer ID Is there some way of making the RV042 behind the BTHH properly identifiable to the other end?
Home Network :: How Mail Transferred From One Email Account
Dec 25, 20111)how is a mail transferred from one e-mail account aaa@xxx.ac.in to bbb@yyy.ac.in . Also explain some features of SMTP Protocol .
2)Write the Syntax and meaning of functions which convert from the network format to the host format.
3)Sketch the different scenario of how computers are connected together in a LAN.
Linksys Wired Router :: RVS4000 - Unable To Ping From Remote Location
Apr 30, 2013I am being told from my remote end I do not have port 22 opened up. I have single port forwarding to SSH 22 and Port Range 22 enabled.
View 1 Replies View RelatedLinksys E1000 Router Reinstall?
May 15, 2011I had to do a total recovery on my Toshiba laptop after getting a bad virus. Now I can't get my router to recognize itHow can I reinstall it? I've worked on this computer for several days trying to get rid of the virus (windows recovery) and it was so bad that's when I decided to just do a recovery on it, and I am worn out and would love to be able to just get this last thing fixed
View 10 Replies View RelatedSetting Up 2 Linksys E1000 Router(s)?
Dec 8, 2011A friend of a friend has a business with 8 computers (3 lap tops) and then desktops. He uses Verizon. I have no idea about how to set this up correctly but, would like to try.He got 2 Linksys routers and asked if I could get them to work on his network. I said I'd try.
There are NO INSTRUCTIONS -
do they go to the "boss computer" and then? I just don't know and feel too stupid to say I'm not sure.It's probably very easy but, it's been years since I've worked on Networks.
Can't Get Linksys E1000 Router To Reset
Nov 6, 2012I'm trying to setup my linksys e1000 router as an access point and I cant figure out how to log in to it to change its settings. I've done every reset procedure I can think of but when I power it up it still shows up as a "security enables network".
View 5 Replies View RelatedLinksys Cable / DSL :: WAG120N And MacBook Airport Incompatibility?
Jan 27, 2011I have a WAG120N annex A on firmware v1.00.16, which appears to be working fine with a variety of devices (iPhone, squeezebox, vista pc, linux pc, android) via wireless and ethernet.
However, my Macbook 4,1 running OSX 10.6.6 keeps losing internet connection regularly and the only way to get it back is to turn the airport off and then on again. It's very odd, appears to still be connected to the router but just can't access the internet!
The Airport version and driver is: AirPort Extreme (0x14E4, 0x88) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1)
Linksys Cable / DSL :: WAG160Nv2 Not Working With New 2011 Macbook Pro?
Mar 20, 2011Signal drops constantly and seems to be a problem with the Mac more than the router IMHO but i thought to register the problem here.
I'm not alone as many users on the Apple support forum are experiencing the same drops via airport and with different routers.. Lan line works fine for me with no issues
I will update the firmware and try that as it seems i am running old firmware V2.00.13
Linksys E1000 Router Cannot Connect To Internet
Jun 10, 2011My modem CAN connect to the Internet but my router CANNOT. I've called my ISP (Brighthouse) and went through a whole process of bypassing the router, restarting the modem for 2 minutes, and restarting the router for 30 seconds. Then I even got assistance from the router's maker (Linksys) by switching the IP address of the router, they said this could be the issue if my modem had the same IP address. I switched it to 192.168.2.1, but still no luck. I do not know what to do now. The new router is a Linksys E1000. I haven't got the specs of my modem yet.
View 3 Replies View RelatedConnecting Linksys E1000 To Comcast Router?
May 2, 2012I have a Comcast Router pushing out IP's in the 10.1.10.X range. I want to hookup a Linksys E1000 Router so I can use its wireless & Guest access features. The Linksys is using the 192.168.1.x range. I have a cable from the comcast router running into the Internet port of the Linksys. I have tried changing the Linksys router IP to 10.1.10.x and turning off DHCP. It will not allow me to the internet nor allow the PC connected to it to connect to the PC that is attached to the Comcast Router. I cannot replace the Comcast as it is a combi router/modem.
View 2 Replies View Related