Linksys Wireless Router :: E4200 Reboots Every Time When Use AirPlay From MacBook Pro
Oct 16, 2011
I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots. When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot. The E4200 is running firmware 1.0.03.
I have an issue when I use Airplay through my iPhone4S, my router reboots after 30 secs or so. I have a WRT54G2 v1.5 and the receiver is a Pioneer VSX-1021-K.
However, when I used Airplay through itunes from my laptop, it works just fine. In addition, when I borrowed my neighbors router's(BELKIN) it was working fine also. So this lead me to believe that it's my router that is causing the issue.
I have 2 X E4200 router, one is directly connected to the internet and the other is in the bridge mode connected to the first router. I have apple TV connected directly with the bridge router on one of the Ethernet port.I notice that when you start apple Airplay mirroring on the iPad2 both the routers will hangs with no reason and the only way to fix it is to reboot the routers. I have reset both the routers to factory default twice they both are running firmware 1.0.03 build 14 .
How to set up a time machine MacBook Air (Mac OS X 10.7.4) on EA4500 (2.0.37) with the disk WD MyBook USB 2TbThe disk is divided into two sections 500 and 1500, 500 by the time machine.After the command (defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1) time machine saw the network drives, but can not be backed up (not supported AFP)
I upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
I bought a e4200 router about 3 weeks ago and after a power outage it decided it didnt like being connected to the internet anymore. So i got on the phone with cisco they determined the router was no good, mind you my laptop would connect wired. So they sent me a "refurbished" one, so i set it up. The new setup was wonky because it said the same message "Your connected to your router but..." then after trying to get the connection its self and failing it came up with "congratulations you are now connected to the internet". That lasted 3hrs and 45mins then died, so i went upstairs to power cycle it, it decided to connect with the old settings. That lased 25mins then died, so i reset it and reconfigured the router. Wouldnt connect, i checked my mac address and it was using my wireless one and kept turning on my wireless connection durring the install. So i cloned my wired mac address and got the internet for roughly an hour... then it died. So i reset it again and kept the wifi off got it going and decided to go to sleep. I wake up and its still working after 8hrs, i go down stairs with my tablet and i dies again. This time it refuses to reconnect, refuses to reset back up just doesnt want to work.
I have the e4200, well, I have had 2 e4200s and they both have had the same issue.I set up my e4200 manually with wpa2 security and I was getting about -50db rssi at my recieving device. Everything tested/worked fine and I went on with life.Without moving the router or anything else over the course of about 3 days the signal had dropped to -71dbm. I power cycled the router and it went back to -53dbm. I tried multiple channels and the same thing keeps happening.The same thing happened a few more times, I contacted tech support, but they just had me change channels.I took the router back for an exchange and the new one has done the same thing in LESS time!The router has the latest firmware and I keep it on an elevated plastic stand to prevent overheating.
Since lion is there for a while, it is still not possible to make a time machine backup on an USB hdd that's connected to the router. is Cisco coming with an firmware update?
My E4200 is rebooting every time it sees traffic on any port, including the internet port. It does not reboot itself if there is nothing plugged in.
Already tried: soft reset (power off for 30 seconds), soft reboot via back panel button, hard reset (press reset for 30, unplug and hold reset for 30, plug in while holding reset for 30).
I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
I just installed my new E4200, and am setting the Access Restrictions. Is there anyway to block the popup window that displays every time I enter the form or save the settings?
I'm using IE9 and have tried adjusting the Popup Blocker, but to no avail.
My wife has an HP laptop running windows 7. when she opens a photo on her laptop , HP mediasmart photo software launches. At the same time , my DIR 655 router reboots knocking everybody off line until it comes back. It does this consistently whenever a photo is opened for viewing on the laptop. I have tried about everything I can think of but still cannot figure this one out. Is it Win7? HP? Dlink? all? both? I've tried defaulting my router and it still does it.
I have a problem when doing Apple Airplay mirroring from my iphone5. Every time it kmocks the wifi signal off so I need to reboot the router. This is only happening on the iphone 5, and not other apple devices using mirroring. Our ipad 3 mirrors perfectly without affecting the wifi. There isn't any specific settings on the iphone 5 for airplay apart from setting it on and off.
if I am XP and online, if I restart into Win7, I have to power cycle my modem before I can go online. If I then restart any number of times into Win7, there is no connections problem. If I then restart into XP, then I have to power cycle the modem again. If I then restart any number of times into XP, then there is no problem. If I then restart into Win7, then I have to power cycle the modem.
I just got a Macbook Air and couldn't get connected at home so I went and bought a new router (our other router was old!!). We purchased the E1200. Our Dell desktop seems to have a fine connection, but my MacBook Air and my husbands laptop are really slow when on the internet.
I just bought a Linksys WRT160N router. I pop the installation disk in my mac book pro and walk thru the installation procedure successfully.But I can't connect wirelessly from my MacBook Pro (running mac os x 10.5).It sees the router and I did type in the password correctly (i copy from the text file generated by the installation procedure), but I keep getting 'coonnection timeout'.
I have the Linksys E2000 and set it up on MacBookPro no problems. My iPhone 3G and my gf's iPhone4 connect no problem. Also, I have an XBox 360 connected via ethernet cable. Her MacBook however is constantly not getting an IP. I set her up with an EZ Key, but every time she connects we have to go through the EZ key process where I run Cisco Connect from my laptop. Why can't she just log in every time? This is frustrating me as all other aspects of this router work fine. I had her plugged into it as well with no problems. Again, it works after a dual computer Cisco Connect cycle, but my computer isn't always home.
Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N. I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel. Linksys support told me that the hardware was not compatible with the high channel.
I am using the E3200 in a bridge mode to my uverse wifi router, since the E3200 has 5ghz and my uverse router doesn't. every week or so, I would not be able to detect the E3200 on my Mac Book Pro (I only enabled 5ghz on the E3200), but I can connect to the 2.4ghz uverse router, then access the admin page of the E3200 w/o.
I just replaced my WRT54G with a WRT120N. Everything is working fine, but...
My MacBook Pro (about 18 months old) claims to support a/b/g/n, but it only wants to connect using 802.11g. It's running Snow Leopard. The laptop and the router are about 3 feet apart. Is there some incompatibilityin the version of 802.11n they support?
I just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
My macbook keeps loosing it's wireless connection after being idle, when I start up I have to find my router and highlight it and connect and if it's idle it losers it's connection all the time.I tried resetting the router to default and started over I also tried every imaginable way of saving my password and connection but I can't find a way I've been into the routers security,trouble shooting,wireless, what's not holding it's connection to my MACBOOK? my iphone 5, ipad, and roku all hold
I recently purchased a Linksys e3000 router. Everything is going great except that both my desktop (Windows 7 Machine) and Laptop (Macbook Pro) keep losing the connection to a DLINK 323 Nas drive I have plugged into the router. This is problematic because I keep my itunes library on the NAS drive.
I recently purchased a Linksys e3000 router. Everything is going great except that both my desktop (Windows 7 Machine) and Laptop (Macbook Pro) keep losing the connection to a DLINK 323 Nas drive I have plugged into the router. This is problematic because I keep my itunes library on the NAS drive.
I just bought an E3000 router. The Setup that comes in the CD does not support OSX 10.7.2 which is the latest version of the operating system.Is there some way to connect it wirelessly to a MacBook running 10.7.2?
I currently have a problem where I have to constantly reboot my ASA whenever my cable modem reboots. The ISP (Pen Tele Data) is setup so that my ASA has to obtain its' static IP using dhcp (ip address dhcp setroute) on the outside interface. Now, I also have another location with a cable connection (Comcast) that does NOT experience the same problem. However, the difference is this ISP allows me to assign my static IP directly on my outside interface. What can I do so that I don't have to reboot my first ASA everytime modem reboots.
I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.
Check to see if there is a firmware upgrade and there is. Well I updated it with the newest and only one out there. I did the upgrade, said sucessful and now it will just random reboot or something........ every few minutes the power light starts flashing....... then all the light go out, then power flashes again and it comes back up. I have tried many times to reflash it with that new firmware but no avail. I wish I had the old firmware back because it was working fine till I did this upgrade.
I have a E2500 router that until recently has been working fine, the router currently will reboot at random occasions. I have tried resetting the router to factory defaults to test if the firmware was an issue but both the factory default and the most recent firmware build(1.0.05 build 2) offered on the download support page. I have tried 2 different AC adapters to test power and two different Cat5 cables so hard ware wise everything is looking good. I am concerned that it may be an issue still with firmware or with the cooling fan and the unit may be overheating.
