Linksys Wireless Router :: E4200 Media Server Becomes Unavailable Most Of Time / Renders Device Useless
Feb 6, 2011
I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
View 9 Replies
ADVERTISEMENT
Jan 24, 2012
I am trying to change the security on my router so I can use WPA2 AES security in conjunction with a media device. The router security page only gives me a choice of WPA2 Personal or WPA2 Enterprise (which requires the use of a Radius Server that I don't have).
View 1 Replies
View Related
Nov 30, 2012
Would it be possible to change it to something else like serviio?
View 3 Replies
View Related
Jul 17, 2011
Connecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.
View 6 Replies
View Related
Mar 28, 2011
I have a WD USB with approx 70,000 songs on it. When I try and scan the Music, it gets approx halfway though the songs, then the Media Servers stops all communications.
The only way I can get the Media Server to recover is to power cycle the E4200
View 9 Replies
View Related
Oct 27, 2011
I have 2 machines using Windows 7 and a Xbox 360. If I use the router for streaming media. Am I able to see the hard drive through the main computer it is hooked up to? Say if I dl something and want to put it on the external drive for media server. Can I save it to drive even though it is hooked up to the router? Overall. What does E4200 media server advantage have over something like windows media player to stream or windows media center?
View 3 Replies
View Related
Jul 27, 2011
I want to know it support or not?
View 5 Replies
View Related
Oct 9, 2011
i've not seen anything that sugests this (also my E4200 is on order, pending delivery, so unable to look into it more), but is it possible to have a remote library with the E4200 media server? i currently have a server with alot of content on it, but it does not support uPnP/DLNA. would i be able to use the E4200 to connect to the server and access it via the E4200's media server?
View 2 Replies
View Related
May 30, 2012
When I'm trying to access the Twonky setting page on http://192.168.1.1:9000/config I get: Access is restricted to MediaServer configuration! Is this normal or not?
View 2 Replies
View Related
Aug 27, 2011
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies
View Related
Oct 23, 2011
I use to run Twonky media server on my iMac and I was very happy with it. Now I have purchased a Linksys Wifi Router E4200. Twonky server embedded works fine with all my devices except with my Samsung D8000 Led TV. In the Mac version I must identify manually the player (Samsung TV), if not mkv won't play. The question is: How can I select the device in the Linksys E4200? The config page is not available and displays "Access is restricted to mediaserver configuration" E4200 firm V. 1.0.03
View 9 Replies
View Related
Jan 5, 2012
I have a 1TB drive attached to my E4200 that contains several videos sorted in a folder hierarchy, like this (these are just examples):
TV Shows
Supernatural
01. Episode 1.mp4
[Code]....
As you can see, all of my videos are in a carefully constructed heirarchy. This works with my old media server (Rivet for Mac). On the E4200, however, all of these MP4 files are merged together. My Xbox shows folders like "Albums" and "By Date", but these don't really mean anything -- all of my videos are jumbled into these folders and there's no way I can find anything.
Here's how the media server is configured:
If I can't find a solution, than the media server feature of this router is absolutely useless to me.
View 2 Replies
View Related
Aug 29, 2011
I'm using .01 firware and I notice that after I reboot the router I get duplicate filenames on the HD attached to it with the video files. What folder or config file can I delete so it will do a clean rescan? please fix the E4200 media server in .02 firmware
View 9 Replies
View Related
Jul 18, 2011
I decided to play around a little more with the media server feature... I've succeeded in getting SOMETHING consistent out of the 1.0.02 firmware. It's not 100% useful.
Here's what I did - whether it's pertinent, who knows:
1) I made the Media Server "Name" completely unique. My router's name was "Penguin" and that seemed to proliferate throughout the settings on the router everywhere (SMB server name, FTP, Media Server, etc.). I decided to just call the media server "Server." I then checked the option to DISABLE the server, and saved settings.
2) With the Media Server OFF, browse to the share on the USB drive, and completely delete the T wonky folder.
3) On the Media Server page of the router config, add your media sources.
4) Enable the Media Server, save, and you'll then see the T wonky folder come back, and if you go into that folder, you'll see some files being "built."
I tested a few videos and some music with the XBMC media player on my Mac book and a Windows 7 PC. I was able to add music and video sources on my small selection of test music and videos. I was also able to play them. MP3 tags and embedded artwork showed up properly, and the streaming over wireless was very good.
Now... Here's the kicker. This was just a VERY small sample of my entire collection. I had about 5 albums in MP3 format on the drive, and about 10 movies that I personally converted to MP4 with Handbrake (ripped each movie to about 1.4gb). When I threw my entire 90gb music collection on the drive and told it to scan (it, being the router Media Server page), it seemed to populate the albums up to a certain point, and then crashed. I saw the data files in the T wonky folder getting larger for about 5 minutes, then it stopped growing. At that same time, XBMC wasn't able to see any music or videos. Even after turning off the media server, then re-enabling it, I wasn't able to see anything. If I deleted the T wonky folder, and went back to a smaller subset of my collection, it once again worked "reliably."
So, one of several things is happening here.
1) There are certain files the media server cannot properly parse, and it's crashing the services that run it.
2) Something is corrupting the media database files which then prevents it from showing up.
3) There's a maximum number of files or file size that your collection can be.
If only there was a syslog we could get to on the stock firmware... Linksys.
View 1 Replies
View Related
Jan 28, 2011
I am having problems with Twonky disconnecting from my PS3 while watching movies from the attached USB drive...
How to manually restart the media server other than turning off the drive or resetting the router? Or perhaps a solution to this in settings...
View 9 Replies
View Related
Aug 21, 2011
How to access the media server and/or external USB drive on an E4200 from an iPad?
View 1 Replies
View Related
Feb 9, 2011
My Verizon USB connection to the internet, suddenly stopped connecting to napster. Prompt says: "Server is unavailable at this time." No one at Verizon has a clue about fixing the problem, which Napster says is a Verizon connection problem..What to do??
View 1 Replies
View Related
Feb 20, 2012
I have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies
View Related
Feb 27, 2012
I have an E4200 with a USB hard drive connected to its USB port. I want to use the E4200 media server to stream divx and other video files on my Sharp Aquos HDTVs.I have an LC-70LE732U and a LC-52LE832U wired to my network. Both of them seem to discover and successfully connect to my media server however only MP3s and certain MPG files are detected. None of the AVI files show up.I have upgraded my E4200 firmware to 1.0.03 hoping that would fix the problem but it didn't. I don't want to run a Windows based media server as I don't have a computer that I can leave on all the time.
View 3 Replies
View Related
Apr 18, 2012
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
View 1 Replies
View Related
Mar 5, 2012
Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details..I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV.The connection schema is pretty straightforward:Computer with 10/100 mbit network adapter-----(network cable)-->E4200----(WIFI)----->TV with 802.11n WIFI adapter.Also 10(ten) mbit Internet connection cable is plugged into WIFI router. The questions are:
1) Can the 10 mbit internet connection affect the speed of the media content being streamed through the E4200 router?
2) Does it make sense to buy the WIFI 802.11 n adapter and use it instead of the network adapter / cable in the connection schema mentioned above?
3) What can be other possible reasons of the lag?
View 2 Replies
View Related
Mar 10, 2012
I have been using the e4200 for about a week. So far, so good! However, a primary reason I purch it was the ability to share via USB across my network (Files and such). Read the approved USB drives that r compatible and although my specfic drive was not listed (WD, my Passport) I connected it to the e4200 and set a folder called "movies"to share. In this folder I have both bluray rips (25-32GB) and standard rips (5gb or less). Regardless of source, the content was not playable. It buffered like crazy. So, is it as simple as using an approved USB drive and I will be able to share appropriately?
The same folder plays great when connected directly to one of my media streamers USB drive, so don't think the drive/source is bad.
View 2 Replies
View Related
Jan 1, 2012
I'm a big fan of Cisco products and recently have purchased an E4200. I always connect my iPod classic to the router and listen to the music on my ps3 and laptop. The only problem is that I can't make any playlists since the media server creates a different link to a song, every time I reconnect my iPod. It'd be great if you allow the server to create links like below. I'm sure all the users will e much happier with it! [URL] like this.
Something tells me I'll never see the day that I can activate this feature on my E4200. Anyways, I leave it to your engineers make it happen...
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Dec 29, 2011
I'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?
View 1 Replies
View Related
Dec 5, 2011
I upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies
View Related
Jun 23, 2011
I have te E4200. When I backed up and restored my media server settings were not there as well as ftp, I found this out upgrading to 1.0.02 that turned out to be a huge waste of time anyways.
View 7 Replies
View Related
Jan 11, 2012
I have 2 Media Bridges, a Trendnet TEW-640MB and TrendNet TEW-680MB. Both are set as a Static IP on the devices 192.168.1.150 and 192.168.1.151. In the DHCP table for my E4200 I don't see those. I have no problem accessing them typing in those IP addresses but wondering why they don't show up in the table.Actually looking at it more closely, the devices hooked up that are active seem to show up.So I see the following below. And where is list LAN but no name those seem to be devices connected to the media bridges.
LAN192.168.1.128 LAN192.168.1.129 iPhoneWireless192.168.1.130 1 Wireless192.168.1.131 LAN192.168.1.135
View 2 Replies
View Related
May 15, 2012
I just setup the Linksys EA4500 router on my computer and I am able to hook up to the internet on my computer and on my Logitech Revue. How do I access the media server? It is not showing up on the Logitech Revue or my Samsung TV
View 9 Replies
View Related
Nov 15, 2011
I bought a e4200 router about 3 weeks ago and after a power outage it decided it didnt like being connected to the internet anymore. So i got on the phone with cisco they determined the router was no good, mind you my laptop would connect wired. So they sent me a "refurbished" one, so i set it up. The new setup was wonky because it said the same message "Your connected to your router but..." then after trying to get the connection its self and failing it came up with "congratulations you are now connected to the internet". That lasted 3hrs and 45mins then died, so i went upstairs to power cycle it, it decided to connect with the old settings. That lased 25mins then died, so i reset it and reconfigured the router. Wouldnt connect, i checked my mac address and it was using my wireless one and kept turning on my wireless connection durring the install. So i cloned my wired mac address and got the internet for roughly an hour... then it died. So i reset it again and kept the wifi off got it going and decided to go to sleep. I wake up and its still working after 8hrs, i go down stairs with my tablet and i dies again. This time it refuses to reconnect, refuses to reset back up just doesnt want to work.
View 3 Replies
View Related
May 7, 2011
I have the e4200, well, I have had 2 e4200s and they both have had the same issue.I set up my e4200 manually with wpa2 security and I was getting about -50db rssi at my recieving device. Everything tested/worked fine and I went on with life.Without moving the router or anything else over the course of about 3 days the signal had dropped to -71dbm. I power cycled the router and it went back to -53dbm. I tried multiple channels and the same thing keeps happening.The same thing happened a few more times, I contacted tech support, but they just had me change channels.I took the router back for an exchange and the new one has done the same thing in LESS time!The router has the latest firmware and I keep it on an elevated plastic stand to prevent overheating.
View 6 Replies
View Related
Mar 25, 2013
Is it possible to change the DLNA Server's name? Cisco49129 just doesn't have a nice ring to it.
View 1 Replies
View Related
Aug 25, 2012
How to get playists to work on the EA4500 Media Server? I have the Music folder share working with a Roku Soundbridge, so now would like to copy my iTunes playlists to this folder as well. I've tried creating a .m3u file in the Music folder but the Soundbridge doesn't recognize it. I put the following one line in this file, which just points to the file stored on the disk connected to the EA4500.
View 1 Replies
View Related
