I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 RepliesI decided to play around a little more with the media server feature... I've succeeded in getting SOMETHING consistent out of the 1.0.02 firmware. It's not 100% useful.
Here's what I did - whether it's pertinent, who knows:
1) I made the Media Server "Name" completely unique. My router's name was "Penguin" and that seemed to proliferate throughout the settings on the router everywhere (SMB server name, FTP, Media Server, etc.). I decided to just call the media server "Server." I then checked the option to DISABLE the server, and saved settings.
2) With the Media Server OFF, browse to the share on the USB drive, and completely delete the T wonky folder.
3) On the Media Server page of the router config, add your media sources.
4) Enable the Media Server, save, and you'll then see the T wonky folder come back, and if you go into that folder, you'll see some files being "built."
I tested a few videos and some music with the XBMC media player on my Mac book and a Windows 7 PC. I was able to add music and video sources on my small selection of test music and videos. I was also able to play them. MP3 tags and embedded artwork showed up properly, and the streaming over wireless was very good.
Now... Here's the kicker. This was just a VERY small sample of my entire collection. I had about 5 albums in MP3 format on the drive, and about 10 movies that I personally converted to MP4 with Handbrake (ripped each movie to about 1.4gb). When I threw my entire 90gb music collection on the drive and told it to scan (it, being the router Media Server page), it seemed to populate the albums up to a certain point, and then crashed. I saw the data files in the T wonky folder getting larger for about 5 minutes, then it stopped growing. At that same time, XBMC wasn't able to see any music or videos. Even after turning off the media server, then re-enabling it, I wasn't able to see anything. If I deleted the T wonky folder, and went back to a smaller subset of my collection, it once again worked "reliably."
So, one of several things is happening here.
1) There are certain files the media server cannot properly parse, and it's crashing the services that run it.
2) Something is corrupting the media database files which then prevents it from showing up.
3) There's a maximum number of files or file size that your collection can be.
If only there was a syslog we could get to on the stock firmware... Linksys.
My WRT610N media server is not serving up large, MKV files (>1GB). I have a 500 GB Maxtor connected with external power.The media server serves smaller files just fine (although they are not MKV files). The disk is formatted as NTFS. I can access the large, MKV files via mapping network drive, so I know they are present on the disk and they are intact; but they media server does not show them.
View 1 Replies View RelatedI just installed this router and connected the hard drive (Western Digital 1TB) which worked fine at first. When I moved some movie files to another folder they lost all of their data. The file names are still present, but all the media files show zero bytes and are no longer usable. Is there anyway to get these files back? I have been digitizing all our movies to the tune of about 90GB. What could be going on here? I disconnected the HD from the router and plugged directly into the laptop. Still shows the file names, but each file is still at zero bytes. Not a cool way to have a media server for your house!
View 6 Replies View RelatedWould it be possible to change it to something else like serviio?
View 3 Replies View RelatedConnecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.
View 6 Replies View RelatedI have a WD USB with approx 70,000 songs on it. When I try and scan the Music, it gets approx halfway though the songs, then the Media Servers stops all communications.
The only way I can get the Media Server to recover is to power cycle the E4200
I have 2 machines using Windows 7 and a Xbox 360. If I use the router for streaming media. Am I able to see the hard drive through the main computer it is hooked up to? Say if I dl something and want to put it on the external drive for media server. Can I save it to drive even though it is hooked up to the router? Overall. What does E4200 media server advantage have over something like windows media player to stream or windows media center?
View 3 Replies View RelatedI want to know it support or not?
View 5 Replies View Relatedi've not seen anything that sugests this (also my E4200 is on order, pending delivery, so unable to look into it more), but is it possible to have a remote library with the E4200 media server? i currently have a server with alot of content on it, but it does not support uPnP/DLNA. would i be able to use the E4200 to connect to the server and access it via the E4200's media server?
View 2 Replies View RelatedWhen I'm trying to access the Twonky setting page on http://192.168.1.1:9000/config I get: Access is restricted to MediaServer configuration! Is this normal or not?
View 2 Replies View RelatedI use to run Twonky media server on my iMac and I was very happy with it. Now I have purchased a Linksys Wifi Router E4200. Twonky server embedded works fine with all my devices except with my Samsung D8000 Led TV. In the Mac version I must identify manually the player (Samsung TV), if not mkv won't play. The question is: How can I select the device in the Linksys E4200? The config page is not available and displays "Access is restricted to mediaserver configuration" E4200 firm V. 1.0.03
View 9 Replies View RelatedI have a 1TB drive attached to my E4200 that contains several videos sorted in a folder hierarchy, like this (these are just examples):
TV Shows
Supernatural
01. Episode 1.mp4
[Code]....
As you can see, all of my videos are in a carefully constructed heirarchy. This works with my old media server (Rivet for Mac). On the E4200, however, all of these MP4 files are merged together. My Xbox shows folders like "Albums" and "By Date", but these don't really mean anything -- all of my videos are jumbled into these folders and there's no way I can find anything.
Here's how the media server is configured:
If I can't find a solution, than the media server feature of this router is absolutely useless to me.
I'm using .01 firware and I notice that after I reboot the router I get duplicate filenames on the HD attached to it with the video files. What folder or config file can I delete so it will do a clean rescan? please fix the E4200 media server in .02 firmware
View 9 Replies View RelatedI am having problems with Twonky disconnecting from my PS3 while watching movies from the attached USB drive...
How to manually restart the media server other than turning off the drive or resetting the router? Or perhaps a solution to this in settings...
How to access the media server and/or external USB drive on an E4200 from an iPad?
View 1 Replies View RelatedI have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View RelatedI have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
I need to transfer a large file(about 1GB) from my pc to FTP server.I tried with C# code in .net, it stated that "buffer size has been exceeded or queue is full".I tried using cmd prompt also, but it transferred about 380 MB and a notification was displayed as "Netout : Software caused connection abort, 451 Failure writing to local file".
View 1 Replies View RelatedI have an E4200 with a USB hard drive connected to its USB port. I want to use the E4200 media server to stream divx and other video files on my Sharp Aquos HDTVs.I have an LC-70LE732U and a LC-52LE832U wired to my network. Both of them seem to discover and successfully connect to my media server however only MP3s and certain MPG files are detected. None of the AVI files show up.I have upgraded my E4200 firmware to 1.0.03 hoping that would fix the problem but it didn't. I don't want to run a Windows based media server as I don't have a computer that I can leave on all the time.
View 3 Replies View RelatedI got a refurbished EA4500 (directly from Cisco) last week. I have been having a few issues, which I have found (not too great) workarounds for. However, the latest issue has me stumped, and is unacceptable.Whenever I am transferring files between 2 computers, I get kind of OK speed (5 MB/s). However, while this transfer happens, no other device can connect to the net. Actually, even trying to go to router home page (192.168.1.1) times out.The clients still say they are connected to the router, but I just can't get anywhere.As soon as the file transfer finishes, everything goes back to normal.EA4500 replaced a WRT54G. Never had any problems with that router. It was such a workhorse. Just needed to upgrade to a n-router.I am on the latest non-cloud firmware.I have reduced the MTU size to 1200. Not sure that matters.
View 9 Replies View RelatedOn the main floor I have a Linksys E3000, hooked up to my ADSL modem along with laptop #1 which has all my video and photos on Picasa. Laptop is on 5ghz, running speed at 300. I'm running the E3000 in dual mode (running 2.4ghz and 5ghz at the same time.) I have 2 different network names mjames5gz and mjames24gz.
In my basement, I have a laptop running on 5ghz and an IP camera running 2.4 ghz. the signal in the basement is on the low side for both. Under Wireless network connection, I am getting around 100 on Speed vs.300 on the laptop.... The basement is fully finished so I can't run cables to the basement easily. What could I buy so I can stream videos from laptop to laptop on 5ghz. Would also be nice to have the 2.4ghz signal boosted as well
When I go upstairs, both laptop read 300 ghz and I can stream between them just fine.
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
i sold off my e4200 & brought a e4500 .The e4200 has had a 2 TB W.D external drive attached ,i stream movies to a sat pvr in the .ts format .The problem is i set the e4500 up & it deleted my .ts files not once but 3 times.when i brought the e4500 i did roll the firmware back to the classic non cloud firmware.the third time i had turned the router off & once swtiched back on my files were gone .should i safely remove the drive from the set up ? what if i have a power failure?
View 5 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I have set up the router with a USB FAT32 Stick 8gb shared six folders with about 5gb of music inside the server only streams the first folder to the network and inside that folder all the MP3 files and another 2 sub folders but not others. Whats the reason for this is there a limit to the amount of files that can be shared if so this should be made clear in your
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
The Media Server feature is quite nice to have but the fact that it is limited to 100 files is a joke. I have a 2TB drive pugged into this router's USB port with hundreds of video files and even more mp3s. Is there any chance that in a future firmware this limit to be removed or at least increased to say 1000?
Region : Spain
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I've recently bought the TP-LINK WDR3600 and am very happy with it. I'm using its media server feature so I can watch movies on my TV through DLNA, but have found a problem: the MP4 files are not shown. All the other files work perfectly (AVI, MKV), but the MP4 files are not shown in Windows Media Player or LG Smart TV. I assume the Media Server software simply does not include this kind of files when scanning. Is there any way of accessing the media server configuration file and "enable" MP4 files?
Region : CzechRepublic
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
1. On my laptop in windows vista media player I cant see any shared media of media server TP-WDR3600: screen.jpg
2. My samsung tv shows all three shared folders of media server. When I try to play any Mp3 and avi files it says unsuported file format. In folder with jpg photos it shows nothing. I can see and play anything from my laptop media server on TV.
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Kabel BW Germany
I have HDD (Toshiba 500GB) connected to router by USB and started media sharing. (The HDD is started on USB Sharing) Samsung LED UE40D7090 (2011 model) is successfully connected to network,. I can see TP-Link on my LED network but it appears with blue exclamation mark and if i try to access the released folders with files (i can see the files) with TV shows me a message "unknown file formatt" and i can�t access it. On the PC - I can access video, pictures and mp3 content on USB HDD, problem just with TV. If i connect the HDD direct to TV , TV can play all files.
Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details..I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV.The connection schema is pretty straightforward:Computer with 10/100 mbit network adapter-----(network cable)-->E4200----(WIFI)----->TV with 802.11n WIFI adapter.Also 10(ten) mbit Internet connection cable is plugged into WIFI router. The questions are:
1) Can the 10 mbit internet connection affect the speed of the media content being streamed through the E4200 router?
2) Does it make sense to buy the WIFI 802.11 n adapter and use it instead of the network adapter / cable in the connection schema mentioned above?
3) What can be other possible reasons of the lag?
I have been using the e4200 for about a week. So far, so good! However, a primary reason I purch it was the ability to share via USB across my network (Files and such). Read the approved USB drives that r compatible and although my specfic drive was not listed (WD, my Passport) I connected it to the e4200 and set a folder called "movies"to share. In this folder I have both bluray rips (25-32GB) and standard rips (5gb or less). Regardless of source, the content was not playable. It buffered like crazy. So, is it as simple as using an approved USB drive and I will be able to share appropriately?
The same folder plays great when connected directly to one of my media streamers USB drive, so don't think the drive/source is bad.
I'm a big fan of Cisco products and recently have purchased an E4200. I always connect my iPod classic to the router and listen to the music on my ps3 and laptop. The only problem is that I can't make any playlists since the media server creates a different link to a song, every time I reconnect my iPod. It'd be great if you allow the server to create links like below. I'm sure all the users will e much happier with it! [URL] like this.
Something tells me I'll never see the day that I can activate this feature on my E4200. Anyways, I leave it to your engineers make it happen...
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View Related