I have te E4200. When I backed up and restored my media server settings were not there as well as ftp, I found this out upgrading to 1.0.02 that turned out to be a huge waste of time anyways.
View 7 RepliesI even just reset to factory and loaded the 1.0.4 firmware but still persists.In the DNS setting, the wireless router adds itself as one of the DNS servers, and I can't figure out why it would do that. My DNS should come from my comcast router and not the e3200 wireless device.
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
Description . . . . . . . . . . . : TP-LINK Wireless USB Adapter
Physical Address. . . . . . . . . : B0-48-7A-xx-xx-xx
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
[Code]....
I have the E3000 and have attched a WD 1TB USB drive. I set it up for FTP and Media sharing and it worked fine but somehow recently I could not connect anymore. I checked the router and all of my setting for the FTP and Media server were gone. The disk drive still shows avaiable but now it shows the entire 1TB free (it was at least half used). This is the second time this has happened, first I tjhought it was a bad disk and replaced it but now it happened again. I did do a power cycle some time ago but I remember it still work after that. Not sure why I am losing my settings. This does not give me a comfort level as to storing anything valuable on that drive.
View 1 Replies View RelatedI have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies View RelatedThere are several features that don't work and are returning errors. For starters, when trying to save settings for media/device prioritization I am receiving a 2123 error message. Unable to save settings. EA4500/N900 Router, Cisco Cloud Connect.
View 3 Replies View RelatedWould it be possible to change it to something else like serviio?
View 3 Replies View RelatedConnecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.
View 6 Replies View RelatedI have a WD USB with approx 70,000 songs on it. When I try and scan the Music, it gets approx halfway though the songs, then the Media Servers stops all communications.
The only way I can get the Media Server to recover is to power cycle the E4200
Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details..I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV.The connection schema is pretty straightforward:Computer with 10/100 mbit network adapter-----(network cable)-->E4200----(WIFI)----->TV with 802.11n WIFI adapter.Also 10(ten) mbit Internet connection cable is plugged into WIFI router. The questions are:
1) Can the 10 mbit internet connection affect the speed of the media content being streamed through the E4200 router?
2) Does it make sense to buy the WIFI 802.11 n adapter and use it instead of the network adapter / cable in the connection schema mentioned above?
3) What can be other possible reasons of the lag?
I have been using the e4200 for about a week. So far, so good! However, a primary reason I purch it was the ability to share via USB across my network (Files and such). Read the approved USB drives that r compatible and although my specfic drive was not listed (WD, my Passport) I connected it to the e4200 and set a folder called "movies"to share. In this folder I have both bluray rips (25-32GB) and standard rips (5gb or less). Regardless of source, the content was not playable. It buffered like crazy. So, is it as simple as using an approved USB drive and I will be able to share appropriately?
The same folder plays great when connected directly to one of my media streamers USB drive, so don't think the drive/source is bad.
I have 2 machines using Windows 7 and a Xbox 360. If I use the router for streaming media. Am I able to see the hard drive through the main computer it is hooked up to? Say if I dl something and want to put it on the external drive for media server. Can I save it to drive even though it is hooked up to the router? Overall. What does E4200 media server advantage have over something like windows media player to stream or windows media center?
View 3 Replies View RelatedI'm a big fan of Cisco products and recently have purchased an E4200. I always connect my iPod classic to the router and listen to the music on my ps3 and laptop. The only problem is that I can't make any playlists since the media server creates a different link to a song, every time I reconnect my iPod. It'd be great if you allow the server to create links like below. I'm sure all the users will e much happier with it! [URL] like this.
Something tells me I'll never see the day that I can activate this feature on my E4200. Anyways, I leave it to your engineers make it happen...
I want to know it support or not?
View 5 Replies View RelatedI upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies View Relatedi've not seen anything that sugests this (also my E4200 is on order, pending delivery, so unable to look into it more), but is it possible to have a remote library with the E4200 media server? i currently have a server with alot of content on it, but it does not support uPnP/DLNA. would i be able to use the E4200 to connect to the server and access it via the E4200's media server?
View 2 Replies View RelatedI have 2 Media Bridges, a Trendnet TEW-640MB and TrendNet TEW-680MB. Both are set as a Static IP on the devices 192.168.1.150 and 192.168.1.151. In the DHCP table for my E4200 I don't see those. I have no problem accessing them typing in those IP addresses but wondering why they don't show up in the table.Actually looking at it more closely, the devices hooked up that are active seem to show up.So I see the following below. And where is list LAN but no name those seem to be devices connected to the media bridges.
LAN192.168.1.128 LAN192.168.1.129 iPhoneWireless192.168.1.130 1 Wireless192.168.1.131 LAN192.168.1.135
When I'm trying to access the Twonky setting page on http://192.168.1.1:9000/config I get: Access is restricted to MediaServer configuration! Is this normal or not?
View 2 Replies View RelatedI've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies View RelatedI use to run Twonky media server on my iMac and I was very happy with it. Now I have purchased a Linksys Wifi Router E4200. Twonky server embedded works fine with all my devices except with my Samsung D8000 Led TV. In the Mac version I must identify manually the player (Samsung TV), if not mkv won't play. The question is: How can I select the device in the Linksys E4200? The config page is not available and displays "Access is restricted to mediaserver configuration" E4200 firm V. 1.0.03
View 9 Replies View RelatedI have a 1TB drive attached to my E4200 that contains several videos sorted in a folder hierarchy, like this (these are just examples):
TV Shows
Supernatural
01. Episode 1.mp4
[Code]....
As you can see, all of my videos are in a carefully constructed heirarchy. This works with my old media server (Rivet for Mac). On the E4200, however, all of these MP4 files are merged together. My Xbox shows folders like "Albums" and "By Date", but these don't really mean anything -- all of my videos are jumbled into these folders and there's no way I can find anything.
Here's how the media server is configured:
If I can't find a solution, than the media server feature of this router is absolutely useless to me.
I'm using .01 firware and I notice that after I reboot the router I get duplicate filenames on the HD attached to it with the video files. What folder or config file can I delete so it will do a clean rescan? please fix the E4200 media server in .02 firmware
View 9 Replies View RelatedI am trying to change the security on my router so I can use WPA2 AES security in conjunction with a media device. The router security page only gives me a choice of WPA2 Personal or WPA2 Enterprise (which requires the use of a Radius Server that I don't have).
View 1 Replies View RelatedI decided to play around a little more with the media server feature... I've succeeded in getting SOMETHING consistent out of the 1.0.02 firmware. It's not 100% useful.
Here's what I did - whether it's pertinent, who knows:
1) I made the Media Server "Name" completely unique. My router's name was "Penguin" and that seemed to proliferate throughout the settings on the router everywhere (SMB server name, FTP, Media Server, etc.). I decided to just call the media server "Server." I then checked the option to DISABLE the server, and saved settings.
2) With the Media Server OFF, browse to the share on the USB drive, and completely delete the T wonky folder.
3) On the Media Server page of the router config, add your media sources.
4) Enable the Media Server, save, and you'll then see the T wonky folder come back, and if you go into that folder, you'll see some files being "built."
I tested a few videos and some music with the XBMC media player on my Mac book and a Windows 7 PC. I was able to add music and video sources on my small selection of test music and videos. I was also able to play them. MP3 tags and embedded artwork showed up properly, and the streaming over wireless was very good.
Now... Here's the kicker. This was just a VERY small sample of my entire collection. I had about 5 albums in MP3 format on the drive, and about 10 movies that I personally converted to MP4 with Handbrake (ripped each movie to about 1.4gb). When I threw my entire 90gb music collection on the drive and told it to scan (it, being the router Media Server page), it seemed to populate the albums up to a certain point, and then crashed. I saw the data files in the T wonky folder getting larger for about 5 minutes, then it stopped growing. At that same time, XBMC wasn't able to see any music or videos. Even after turning off the media server, then re-enabling it, I wasn't able to see anything. If I deleted the T wonky folder, and went back to a smaller subset of my collection, it once again worked "reliably."
So, one of several things is happening here.
1) There are certain files the media server cannot properly parse, and it's crashing the services that run it.
2) Something is corrupting the media database files which then prevents it from showing up.
3) There's a maximum number of files or file size that your collection can be.
If only there was a syslog we could get to on the stock firmware... Linksys.
I am having problems with Twonky disconnecting from my PS3 while watching movies from the attached USB drive...
How to manually restart the media server other than turning off the drive or resetting the router? Or perhaps a solution to this in settings...
I have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View RelatedI have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..
View 4 Replies View RelatedHow to access the media server and/or external USB drive on an E4200 from an iPad?
View 1 Replies View RelatedManually type http://192.168.1.1/Wireless_Advanced.asp and the Advanced Wireless Settings tab appears! (I found this info in dd-wrt forum). A lot more settings to play with here, including transmission power for both 5GHz and 2.4GHz.
View 3 Replies View RelatedHow to configure settings for E4200
View 1 Replies View RelatedI just picked up a E4200 last nite and installed it and everything seems to be connecting ok, but I'm just not sure I have the optimal settings. This is my first dual band router.I have a mixture of G and N devices on the network - notebooks, desktop, phones, Wii. etc.What are the best settings for each of the 5 and 2.4 bands? I have read that you want to have the same SSID and encryption keys, so clients can go from one or the other seamlessly. It's mostly the Basic Wireless Settings that I want to get straight. Right now everything is on Mixed and Auto, and I'm not sure that's entirely correct.
Also, does anyone have any recommendations for a PCI and USB wireless adapter that works well with this router and provides the best range and throughput? I have both a laptop and desktop in a detached building with no physical cables. I want to ensure these have the best connection possible.
I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
Can I do this with a E4200? I want to do this for gaming reasons, and I mainly want to slow my speed down. I currently have my console hard wired to the router. I have accessed the firmware for the router but don't see how to change speeds.
View 2 Replies View RelatedI just purchased an e4200 in a corporate environment where we already have a wireless router. I am not able to connect the 2 devices via a LAN cable and am wondering if I can get bridge mode working over the network (wireless). I set the Linksys to bridge mode and assigned it an ip address. I disabled all wireless settings, etc. I then connected the internet port of the Linksys into a data port (wall jack) that connects to our flat network switch. It says it's connected under "Status" but I'm not sure how to confirm this.
View 3 Replies View Related