Linksys Wireless Router :: E3000 Lost All FTP And Media Server Settings
Jan 27, 2012
I have the E3000 and have attched a WD 1TB USB drive. I set it up for FTP and Media sharing and it worked fine but somehow recently I could not connect anymore. I checked the router and all of my setting for the FTP and Media server were gone. The disk drive still shows avaiable but now it shows the entire 1TB free (it was at least half used). This is the second time this has happened, first I tjhought it was a bad disk and replaced it but now it happened again. I did do a power cycle some time ago but I remember it still work after that. Not sure why I am losing my settings. This does not give me a comfort level as to storing anything valuable on that drive.
View 1 Replies
ADVERTISEMENT
Apr 18, 2012
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
View 1 Replies
View Related
May 29, 2010
I have connected my LaCie rugged drive to the router and would like to use it as backup storage and as a way to stream video to my PS3.When I go to my advanced settings for the router and go to the storage heading I can see my LaCie and its specifications. There is a button next to it that says "claim", which I press, but nothing happens.I don't have the option to create a shared folder, and I can't access the drive from my Mac.On a somewhat related note, I've enabled the media server and can find it on my PS3, but there is nothing in the root folders. How do I put stuff (movies, music,etc.) into these root folders?
View 7 Replies
View Related
Jan 1, 2011
I just installed this router and connected the hard drive (Western Digital 1TB) which worked fine at first. When I moved some movie files to another folder they lost all of their data. The file names are still present, but all the media files show zero bytes and are no longer usable. Is there anyway to get these files back? I have been digitizing all our movies to the tune of about 90GB. What could be going on here? I disconnected the HD from the router and plugged directly into the laptop. Still shows the file names, but each file is still at zero bytes. Not a cool way to have a media server for your house!
View 6 Replies
View Related
Feb 19, 2012
Is there support for album art or video thumbnails in the UPNP media server on the E3000? I've tried adding jpg files with the same name as the video file, but I see nothing in the client. I've also tried naming them 'folder.jpg' and 'cover.jpg' but still get nothing. If this isn't supported is there any plan to add support in the future?
View 2 Replies
View Related
Nov 30, 2012
For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
View 1 Replies
View Related
Feb 11, 2012
I have a 1TB USB hard drive attached to my E3000 (current firmware), I use it for FTP and Shared Media on my network. Recently I have noticed that I have files out there that have 0 KB in size (file names/details are still these), I re-upload the files to the folders and during the upload the correct file size shows but a bit later(within minutes) they all show 0 KB again. I have not seen this type of behavior on an HD before. Additionally, I added some 20 mp3 files to the FTP site, same thing happened but then I zipped up the 20 mp3 files and the zip file uploaded with not problems and is still there with its proper file size, of course this is not a solution when I want to play media files on my TV.
View 2 Replies
View Related
Jan 9, 2011
I am very pleased with my purchase of the E3000 so far. However, one function seems to allude me. One of the main reasons for purchasing this router was because of its Media Server functionality. I wanted to be able to stream to my UPnP devices (ps3, xbox360, etc) without having to keep my power hog of a PC running. I have set up the HD using the Storage tab of the Advanced Router Settings, and created several Shares on the Media Server tab. The good news is that I am able to access the share on my PS3. The bad news is that I can't on my Xbox360s. As the Xbox360s has built in wireless N, I would really like to be able to stream to that system.
View 8 Replies
View Related
Jul 26, 2010
I am unable to see my network media player (wired CAT6 or wireless) using the SAMBA Share feature. My UPNP works fine. I do not have this issue when I am using the Linksys WRT54G or a Netgear WNDR3700 (I returned it to give the E3000 a try) - so I know all my share persmissions and device firewall is turned off. How do I get it to work with the E3000? I want to be able to transfer and stream media files to my media player using SAMBA. Usually my network media player automatically detects SAMBA Servers/Devices and adds it to its list for me to access. But when I use the E3000 that is not the case.
View 4 Replies
View Related
Aug 17, 2012
I lost my cd for my router e3000 any way still to use it?
View 1 Replies
View Related
Jan 26, 2013
I'm trying to set up an Iomega Home Media Network Cloud NAS and I'm having problems with opening ports 50500-50599. I have opened port 80 and 443 successfully and included the above port range above as well, but when I check it on www.yougetsignal.com the ports 50500-50599 are still closed. I even tried to split the range in two parts, and still no success. I have been in contact with my ISP and confirmed they do not block any ports in the 50500-50599 range and that the cable modem (a Motorola SBV5120) is operating in Bridge Mode.
View 3 Replies
View Related
Jun 23, 2011
I have te E4200. When I backed up and restored my media server settings were not there as well as ftp, I found this out upgrading to 1.0.02 that turned out to be a huge waste of time anyways.
View 7 Replies
View Related
Aug 15, 2011
My E3000 has been running for months without a hitch. Last night, it lost connectivity on the 2.4 GHz. I can connect on my laptop (Dell, XP) on the wireless 5 Ghz only. Wired connections (2 PCs and one video device) connect fine. All wireless equipment (laptops and LG DVD device needing 2.4 GHz) see the 2.4 GHz with good signal but will not connect. Of course, I rechecked name and passwords.
I tried the MSR restart and reboot several times, including turning things off overnight. Checked to be sure settings were not corrupted in setup.E3000 running firmware 1.0.04.
View 3 Replies
View Related
Jan 4, 2012
I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies
View Related
Mar 5, 2013
There are several features that don't work and are returning errors. For starters, when trying to save settings for media/device prioritization I am receiving a 2123 error message. Unable to save settings. EA4500/N900 Router, Cisco Cloud Connect.
View 3 Replies
View Related
Apr 1, 2010
I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies
View Related
Dec 16, 2012
I had my external drive plugged into the e3000 with the network drive mapped on 2 laptops. One day my connection was slow so I backdoored the router ip (I didn't use cisco connect) to reset the router from my iPhone. I'm not sure exactly what was changed, but the partition disappeared from the drive. I've used a couple file recovery programs to try and retrieve the 250+ Gb data that was on the drive with no luck. They only find "deleted" files. Not the 13k files that were there and not deleted. The drive was never bootable. What to be used to recover the files.
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Apr 24, 2010
I just recently upgraded my router from the WRT160n V3 to the E3000. I had to port forward from my old 160n to get my NAT settings from Xbox Live set to OPEN. When I switched out the router to the new E3000, my Xbox Live settings went back to Medium (Moderate). I assumed this would happend since its a new router/setup.
setup my E3000 and Xbox Live so I can have my NAT settings to OPEN? I only need to setup 1 Xbox.
View 9 Replies
View Related
Nov 28, 2011
i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
May 15, 2012
I just setup the Linksys EA4500 router on my computer and I am able to hook up to the internet on my computer and on my Logitech Revue. How do I access the media server? It is not showing up on the Logitech Revue or my Samsung TV
View 9 Replies
View Related
Mar 25, 2013
Is it possible to change the DLNA Server's name? Cisco49129 just doesn't have a nice ring to it.
View 1 Replies
View Related
Nov 30, 2012
Would it be possible to change it to something else like serviio?
View 3 Replies
View Related
Jul 17, 2011
Connecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.
View 6 Replies
View Related
Mar 28, 2011
I have a WD USB with approx 70,000 songs on it. When I try and scan the Music, it gets approx halfway though the songs, then the Media Servers stops all communications.
The only way I can get the Media Server to recover is to power cycle the E4200
View 9 Replies
View Related
Oct 27, 2011
I have 2 machines using Windows 7 and a Xbox 360. If I use the router for streaming media. Am I able to see the hard drive through the main computer it is hooked up to? Say if I dl something and want to put it on the external drive for media server. Can I save it to drive even though it is hooked up to the router? Overall. What does E4200 media server advantage have over something like windows media player to stream or windows media center?
View 3 Replies
View Related
Aug 25, 2012
How to get playists to work on the EA4500 Media Server? I have the Music folder share working with a Roku Soundbridge, so now would like to copy my iTunes playlists to this folder as well. I've tried creating a .m3u file in the Music folder but the Soundbridge doesn't recognize it. I put the following one line in this file, which just points to the file stored on the disk connected to the EA4500.
View 1 Replies
View Related
Jul 27, 2011
I want to know it support or not?
View 5 Replies
View Related
Mar 28, 2012
My WRT610N media server is not serving up large, MKV files (>1GB). I have a 500 GB Maxtor connected with external power.The media server serves smaller files just fine (although they are not MKV files). The disk is formatted as NTFS. I can access the large, MKV files via mapping network drive, so I know they are present on the disk and they are intact; but they media server does not show them.
View 1 Replies
View Related
Mar 25, 2012
When I try to stream a movie through the media server or through my computer to my xbox 360 the video will play fine for a couple minutes then it well get choppy and then the sound will not sync with the picture. I have the latest firmware and reset it also. Tried switching channels and changed mtu didn't do anything. tried steaming on 2 different xboxs and its the same thing.
View 3 Replies
View Related
Oct 1, 2010
I have an NTFS formatted USB disk drive (Western Digital My Passport Essential Black 320 GB WDBAAA3200ABK) attached to the WRT160NL wireless router (Firmware Version 1.0.02), and I have video, picture and music files on the USB disk drive in three folders: Videos, Music, Pictures. Auto-scan is disabled, I scan the media files manually by clicking on the 'Scan All' button.
PROBLEM 1 The worst problem is that the router is very sensitive to files that can't be recognized by the router as media files. For example if there are subtitle files (*.str) between the media files, then strange and nondeterministic things happen: some valid media files are skipped and not included in the media database; some files included but the file names are mixed. The most irritating in the bug is that there is no log file, where you could find the problem, and so you never know which file cause the problem, and you have to browse through all the files hunting for the cause.
PROBLEM 2 When the router is in the process of scanning the media files, then the internet (WAN) connection often can't be used, although the router can be accessed and the status says it is connected to the internet.
View 4 Replies
View Related
Aug 1, 2012
I'm very disappointed with this EA4500 DLNA feature this is one of the main reasons why i got this router.My Sammy TV can detect the USB that is attached and is able to view the files in the drive but when you play any video file larger than 1gb it does not work even shuts down my TV.Only on smaller files does it work flawlessly I know its not the TV because I have played those files on my previous Router (Netgear WNDR3800) and they even work when i connect the hard drive directly to the TV has any one else had this issue happen to them?
View 9 Replies
View Related
