Linksys Wireless Router :: E3000 Lost Connectivity When Go Into Sleep Mode
Apr 1, 2010
I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies
ADVERTISEMENT
Aug 15, 2011
My E3000 has been running for months without a hitch. Last night, it lost connectivity on the 2.4 GHz. I can connect on my laptop (Dell, XP) on the wireless 5 Ghz only. Wired connections (2 PCs and one video device) connect fine. All wireless equipment (laptops and LG DVD device needing 2.4 GHz) see the 2.4 GHz with good signal but will not connect. Of course, I rechecked name and passwords.
I tried the MSR restart and reboot several times, including turning things off overnight. Checked to be sure settings were not corrupted in setup.E3000 running firmware 1.0.04.
View 3 Replies
View Related
Jan 9, 2012
I have TP Link TL-WR740N , Firmware Version: 3.12.11 Build 110915 Rel.40896n . All working fine , but one problem whan I put my PC to sleep mode , and roter stay working , after when I awake PC it lost connection with router !
View 2 Replies
View Related
Feb 8, 2011
Just installed a new WAG120N for a customer.All works fine except when I go to her sleep out, not more than 6 meters away - no connectivity through wireless, so bad that it doesn't even see it - this is with two separate laptops.The walls are nothing special - wood outside, wool fiber insulation & gib board inside.Roof standard corrugated iron.
View 1 Replies
View Related
Aug 17, 2012
I lost my cd for my router e3000 any way still to use it?
View 1 Replies
View Related
Jan 27, 2012
I have the E3000 and have attched a WD 1TB USB drive. I set it up for FTP and Media sharing and it worked fine but somehow recently I could not connect anymore. I checked the router and all of my setting for the FTP and Media server were gone. The disk drive still shows avaiable but now it shows the entire 1TB free (it was at least half used). This is the second time this has happened, first I tjhought it was a bad disk and replaced it but now it happened again. I did do a power cycle some time ago but I remember it still work after that. Not sure why I am losing my settings. This does not give me a comfort level as to storing anything valuable on that drive.
View 1 Replies
View Related
Dec 16, 2012
I had my external drive plugged into the e3000 with the network drive mapped on 2 laptops. One day my connection was slow so I backdoored the router ip (I didn't use cisco connect) to reset the router from my iPhone. I'm not sure exactly what was changed, but the partition disappeared from the drive. I've used a couple file recovery programs to try and retrieve the 250+ Gb data that was on the drive with no luck. They only find "deleted" files. Not the 13k files that were there and not deleted. The drive was never bootable. What to be used to recover the files.
View 1 Replies
View Related
Feb 25, 2013
I use a WUMC710 bridge with desktop PC and a Printer connected to it. When those two devices have been inactive for a while the bridge goes into sleep mode and loses the connection Back to my EA6500. Trying to print something from wireless devices connected to the 6500 elsewhere in the network doesn't "wake up" the bridge. Ihave to unplug the power supply and restart it.
View 2 Replies
View Related
Sep 7, 2010
Issue with Linksys E3000 router (firmware 1.0.02). I'm experiencing issues with the following wireless connections:
-iPhone 4G (wife's)
-iPod Touch 2G
-PC with wireless connection (non Linksys brand adapter)
-Acer NetBook (non Linksys brand adapter)
The issue is the connection gets interrupted and dropped, but the devices and the router DHCP clients table show the connections are still present. By interruption, I mean no data traffic is being transmitted.My wife's iPhone 4G and my son's iPod Touch wifi both show they are connected to the home network, complete with wifi bars being displayed, and the checkmark is present next to the home network connection in the the device settings for both. When I check the E3000 DHCP clients table, both Apple devices are listed as holding a connection. Yet both devices display network errors when trying to use any app that connects to the internet. By restarting the wifi connection on each, the connection is restored to the point where traffic now transmits. My wife and son estimate it is after about 10 minutes that they encounter the interruptions.
On the PC and NetBook, the connections have to be terminated and reconnected. I have not timed these to see how long before the connection becomes problematic.Interestingly, my ASUS laptop and my iPhone 4G do not have the issue, nor does my work laptop (Dell).There are no timeout parameters in the router config. Closest thing to it is the Beacon Interval, but I don't know which way to adjust it (up or down) to manage the devices that are experiencing interruptions. I have not made any interval adjustments...at this time, everything is set to default settings.This E3000 replaced an aging WRT54 (hardware v2) router so that I could have an N router in the house.
View 9 Replies
View Related
Dec 26, 2011
I recently set up a wrt54g router that I got used from a friend. I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days. Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again. Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again.
View 1 Replies
View Related
Oct 28, 2012
Noticed this AM that a new firmware was releaesed to my EA6500!! Very surprised to find it Monday AM. I went ahead & updated my firmware but lost connectivity to my Comcast cable modem. I was leaving for work so I had to pull the router & revert back to my original Linksys router.zBig storm heading my way, figured the wifw ywould need internet to track Hurricane Sandy. Any others have a new firmware waiting for install this AM? Keeping my fingers corossed on this firmware upgrade. I'm hoping it solves the device map issue.
View 2 Replies
View Related
Dec 2, 2011
I updated the fimware on my WRT160N v3 and followed it up with a reset of the router. I then restored the router settings that I had saved. All the settings appeared to be good, but none of my wireless devices would connect. I reneted the pass phrases (WPA2) but still nothing. Tried to change the passphrase, still no good. I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing. All of my devices are able to "see" the network and the correct SSID.
View 9 Replies
View Related
Feb 14, 2013
I have an E3000 router guest access set up via CD. Is is possible to set up a Security Mode setting on this rather than it being open to all. I cannot find anything for Admin to set this up, it seems a glitch in security?
View 1 Replies
View Related
Dec 19, 2011
I have replaced my main router WRT300N running dd-wrt with the a stock E4200 and an old WRT54G aslo running dd-wrt configured for wireless client bridge. Now that I'm learning more about 802.11N, I was wondering what client can I use to achieve 5ghz simultaneously radio transmission since my current setup cannot do this in the 5ghz band. Can the E3000 be ran in wireless client bridge mode, if not what product can provide this? On the other thought am I understanding MIMO?
Old setup: 802.11G 2.4ghz
WRT54G ))) ((( WRT300N ->ISP
Current Setup: 802.11N 2.4ghz MIMO?
WRT300N ))) ((( E4200 ->ISP
Wanted Setup: 802.11N 5ghz MIMO
( E4200 ->ISP)
View 3 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Jul 5, 2011
Who knows the best version (DD-WRT or other) to repeat the wireless signal with a E3000?At worst, a client bridge mode could be sufficient for my needs...
View 9 Replies
View Related
Jun 28, 2011
I used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
View 10 Replies
View Related
Feb 10, 2013
I have a Dell Inspirion M5110. Windows 7, 64 bit.
When ever I open the lid to the laptop it takes 5-10 mins before it will automatically connect to a network. Diagnose this network does not find anything, nor provides any troubleshooting. Typically if I open the network connections center and disable the wireless, let it sit for 30 secs or so, and re-enable, it will finally connect.
I know it's not my router, as the laptop does the same thing at work, and multiple different friends house.
I've confirmed that DHCP is set to automatic connect. I've also checked Device Manager/Network adapters/ and unchecked the box "allow the computer to turn off this device to save power"
View 3 Replies
View Related
Feb 12, 2012
I have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies
View Related
Oct 25, 2012
Major symptom: Maddeningly intermittent wireless issues with Asus laptop after repair. Unable to connect to network after sleep or reboot on upper floors of house.
History:
1) Laptop wireless was working fine but power jack and case were damaged.
2) Sent away to Asus for free repair (pulled the HD first).
3) Got it back and seemed fine, but...
Problem:Wireless starting dropping after sleep. It's my wife's laptop and she usually uses it on the 2nd floor of the house.Routers are on the first floor. It failed the same way on both my G and N routers. Played with all sorts of settings, disabled IPv6, reinstalled drivers, checked for BIOS update. No luck . Eventually saw some event log entries that might have been associated with a bad wifi card. Ordered a new Intel 100 N (OEM model) and replaced card, same issues. Swapped card with a Broadcom 1510 from an old Dell I had. Same problem.
Tried more settings, static IP, flushing DNS, etc. Same problem.At this point the event log has nothing notable in it, no error logs anywhere the wireless card will just report no connectivity.when I work on this laptop I take it down into my office, which is on the 1st floor by my router. The laptop works flawlessly there (10 feet from the router). So my theory at this point is that Asus damaged or otherwise messed up the laptop antenna while repairing the laptop. most of the time on the 2nd floor the windows wifi icon reports a perfectly good signal, and if I boot the laptop on the first floor and walk upstairs, the laptop works fine(as long as I don't reboot or let it go to sleep).
View 4 Replies
View Related
Apr 26, 2012
I Buyed a new laptop yesterday(24-04-2012) so original W7 and i updated everything incl drivers and everything was great and i let the laptop on when i Was going to sleep and my wireless and lan internet did fine.. But then.. when i wake up suddenly it tells "No Connections Are Available" and i cant find any wifi's anymore + lan does not even work, but the adapters are both working fine it says + they are up to date, the router is fine cuz i have lan on pc and wifi on samsung galaxy, everything about wifi is on incl the button on the laptop..I only have 1 antivirus or so program and i have a red cross @ network and sharing settings?Network adapters (They both work): Atheros AR9285 wireless adapter & Realtek PCIe GBE family controller (both newest drivers installed)
View 3 Replies
View Related
Mar 15, 2011
While watching movie - screen goes blank and 'error mssg ' states error is preventing slide show from playing'
View 1 Replies
View Related
May 7, 2012
Have already checked in the Device Manager if the �Allow this device to wake the computer� is unchecked.What do I do to bring the sleep mode back without turning off the file sharing (if file sharing caused the problem)?
View 1 Replies
View Related
Dec 1, 2011
I'm having an issue where essentially my only course of action is to unplug the router and plug it back in. I can connect my laptop (Dell Inspiron N4010) and my phone (HTC Inspire) once. But then if I put my computer to sleep, or I take my phone out of the wireless range and come back, I cannot connect again. I've gone through and played with the settings (changing the upnp, the beacon intervals, the channel, etc) but to no avail. Invariably, I always have to come back to unplugging and plugging back in.
Also have a Kobo E-Reader and a wireless Canon printer. The whole point of a wireless printer was so that it would stay connected and I can print from my laptop. This router is making this useless.
View 4 Replies
View Related
Feb 4, 2013
Got a new EA6500 a few days ago and from the start it acts as if times out and goes to sleep. Any time I enter a URL i get a long pause then the website unavailable message... refresh a few times then suddenly it works fine. this is for both connected and wireless. Even when I have the Linksys Smart WiFi open, I'll get a pop-up message that no router connected, then it goes away and everything is fine. Sometimes the old Windows Network message pops up asking me to connect. Works fine once it's "ON", but always have to refresh page a few times to get it to wake up.
View 9 Replies
View Related
Apr 13, 2012
So whenever I put my desktop to sleep and then turn it back on, I cannot connect to the internet. My laptops are fine and can connect to the internet w/ the wireless however.When I have windows diagnostic run a troubleshoot and repair, it tells me it can't communicate w/ the primary DNS server and that resetting the Local Area Connection will fix it (And it does).If I restart the computer, it seems to fix this problem as well.I don't get why it can't communicate w/ the DNS and that I have to manually reset the LAC everytime I turn on the computer from sleep mode.
View 3 Replies
View Related
Apr 30, 2013
I am completely baffled by what is going on, on our network. We have four HP C4005 Printers. All of them connected to different switches around the network. About every 1-3 hours they all give the error 49FF09 (which is pretty vague, basically a network connectivity issue). Have to reboot to get rid of the error, then it will work again for an hour or so and give the same error (whether print jobs have been sent or not). This started a few days ago out of no where.
I am starting to think its an issue with the network, because they will all go offline at the same time. If I run a constant ping to them, they will all go offline at the same time and return the error. We use all cisco equipment. If I check the port statuses they all say up 100 full with no errors.
I have tried disabling sleep mode on the printers, turned off multicasting, updated firmware for printer and for jetdirect, and used different drivers.
View 19 Replies
View Related
May 15, 2011
I am trying to download large files which are taking about 3-8 hours to download. I don't have that much time, so I have to put my computer into sleep mode. Now, the problem is, I put it into sleep mode, turn it back on, Chrome says the downloads are finished. I open one of them, and it says the file is corrupt.
View 14 Replies
View Related
May 20, 2012
I'm using aironet 1210, 1130, 1100, 1040 autonomous mode, in a University campus network with thousands of daily user.We're using RADIUS authentication and AES/WPA2.In the past, there were some major issues with traffic (broadcast / multicast) in the wireless networks, that would spread all around the campus causing excessive processing at the access-points.To solve the problem we decided to implement access list at the radio interface to drop all the unwanted traffic. [code]
I'm pretty sure this is caused by the ACL (I've tested removing the ACL and the issue never occurred) but I can't just get ride of it.
Any alternative way to drop broadcasts?
View 6 Replies
View Related
Jul 21, 2012
indows 7 Studio 1458 Crashes when entering Sleep Mode
View 2 Replies
View Related
Feb 1, 2013
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
View 3 Replies
View Related
Oct 28, 2010
Bought a month or 2 ago, configured and installed as our public access point. Worked well except for locking up weekly. A few weeks back, I lost all connectivity with it. It will get power, but no wireless and no Ethernet lights on the front. I attempted to reset it with no luck. Firmware is V01.
View 1 Replies
View Related
Jan 18, 2012
I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies
View Related
