Dell :: Windows 7 Studio 1458 Crashes When Entering Sleep Mode
Jul 21, 2012indows 7 Studio 1458 Crashes when entering Sleep Mode
View 2 Replies
ADVERTISEMENT
Dell :: Windows 8 Drivers For Studio 1458?
Nov 12, 2012Windows 8 just released not long ago, and I am eager to upgrade my laptop to this version. From what I am understanding that Bluetooth is an issue along with Dell own drivers and configuration caused the upgrade delay. Dell will resolve and make drivers available to Windows 8.
View 1 Replies View RelatedDell :: Inspiron M5110 - Laptop Will Not Connect To Wireless Automatically After Sleep Mode
Feb 10, 2013I have a Dell Inspirion M5110. Windows 7, 64 bit.
When ever I open the lid to the laptop it takes 5-10 mins before it will automatically connect to a network. Diagnose this network does not find anything, nor provides any troubleshooting. Typically if I open the network connections center and disable the wireless, let it sit for 30 secs or so, and re-enable, it will finally connect.
I know it's not my router, as the laptop does the same thing at work, and multiple different friends house.
I've confirmed that DHCP is set to automatic connect. I've also checked Device Manager/Network adapters/ and unchecked the box "allow the computer to turn off this device to save power"
Dell :: 1510 / Wireless Connection Takes Forever To Connect After Laptop Comes Out Of Sleep Mode
Feb 12, 2012I have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies View RelatedDell :: Studio 1737 Laptop / Installing Windows 7?
Jul 17, 2012I've got a customers laptop here which had Windows 7 64bit OS Installed when i received it. They wanted a fresh install with there own windows 7 disk (Which is in perfect condition) The problem I'm having is when the windows installation gets to a certain point i.e Completing Installation the resolution changes (which i know is normal) And then crashes!
View 3 Replies View RelatedDell Studio 1745 With Windows 7 - Can't Connect To Wireless Network
Dec 4, 2012I am having trouble connecting to my wireless network sometimes it shows up sometimes it does not but when it is there it sometimes has full bars and others has none. I have tried resolving the the issues through windows and it either says windows cannot resolve your wireless connectivity issue or it says to unplug router for 10 seconds blah blah blah. sometimes it says there is an issue at the access point or wireless adapter. It is really getting frustrating and everything else that is wireless works in my house. I have a dell studio 1745 and windows 7 on it.
View 3 Replies View RelatedDell :: Studio 1558 - 365 Bluetooth Adapter Is Not Compatible With Windows 8
Apr 17, 2013Dell 365 Bluetooth Adapter program for [ Dell Studio 1558 ] is not compatible with windows 8. please update this program for compatibility with windows 8.
View 1 Replies View RelatedRT-N66U Not Entering Recovery Mode?
Jun 28, 2013I just bought an N66U and started the process of flashing dd-wrt onto it via Asus' web GUI. I followed the steps on their wiki and it said 'complete!' I went to do another hard reset, as per the instructions, and no dice. I fear I may have bricked it
The next apparent step to me was to get it into recovery mode and either restore the asus fw or continue down that path with the ddwrt stuff, but I can't get it into restore mode
The documentation says the power LED is supposed to blink 'slowly' after holding the reset button + insert power adapter. I can't get to this stage.
Also, whenever I plug it in, the LED's on ports 2, 1, and WAN are solid for a few seconds. I don't know if it did this before, but I thought it could be an error code of some sort.
Dell Studio 1557 Running Windows 7 - Slow / Down Internet Connection?
Nov 3, 2011I have a dell studio 1557 running windows 7. I live in my own apartment with roommates in college, and i've been having some very bad issues with slow internet or constant down time. Here are some key points:
- I have Charter internet.
- My 2 other roommates have NO ISSUES.
- My laptop works in my family's house. They have Comcast. I went on vacation a week ago and there were no issues on the hotel internet. No issues from the school's internet.
- I have been using my android phone as a tether because the internet is more stable. It's slow, but consistent for the most part. This is extra frustrating because I shouldnt have slow internet. And I sure as hell shouldnt be paying for internet I can't even enjoy.
- Charter has replaced 2 routers. Both are brand new. They are net gear. Charter is clueless to my problem.
- I have reinstalled windows. Dell told me to try safe mode. I noticed NO ISSUES WITH STANDARD BROWSING IN SAFE MODE. This leads me to believe it is a software issue.
- The connection is non-existent when coming out of hibernation or rebooting. In the morning, i have to boot up, make my coffee, and only then will it give me access to the internet. Otherwise, page timeouts. It can take up to 10 minutes for the internet to work.
- Youtube and general multitasking is very bad. Slower connection than ever, page timeouts, and I often need to wait for a video/music to buffer before I begin enjoying it.
My laptop has been this way for upwards of 6 months.
Linksys Wireless Router :: SE2500 Crashes Windows 7 Dell XPS 420 Computer?
Oct 19, 2011DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime
The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
Dell :: Studio 1735 / 1510 N WLAN Mini Card Compatible With Windows 8
Oct 29, 2012I installed W8 on my Dell Studio 1735 computer. Wireless Internet access is very very slow. I have not this problem with W7 on the same computer. I tried it with an external Network cable. Very fast, 50mbps. I also tried it with an external USB Belkin wifi adaptor. It works fine. Computer has a Dell Wireless 1500 N WLAN Mini Card. Driver version:5.100.245.20 Date 2012-03-13. I cannot find any better driver.
I have one more problem that I don't have with W7. I cannot rate the computer. The Windows experience index cannot go past the test of Direct3D 10 Texture Load Assesment.
No Connections Are Available After Sleep Mode
Apr 26, 2012I Buyed a new laptop yesterday(24-04-2012) so original W7 and i updated everything incl drivers and everything was great and i let the laptop on when i Was going to sleep and my wireless and lan internet did fine.. But then.. when i wake up suddenly it tells "No Connections Are Available" and i cant find any wifi's anymore + lan does not even work, but the adapters are both working fine it says + they are up to date, the router is fine cuz i have lan on pc and wifi on samsung galaxy, everything about wifi is on incl the button on the laptop..I only have 1 antivirus or so program and i have a red cross @ network and sharing settings?Network adapters (They both work): Atheros AR9285 wireless adapter & Realtek PCIe GBE family controller (both newest drivers installed)
View 3 Replies View RelatedBroadband :: How To Turn Off Sleep Mode
Mar 15, 2011While watching movie - screen goes blank and 'error mssg ' states error is preventing slide show from playing'
View 1 Replies View RelatedTo Bring Sleep Mode Without Turning Off
May 7, 2012Have already checked in the Device Manager if the �Allow this device to wake the computer� is unchecked.What do I do to bring the sleep mode back without turning off the file sharing (if file sharing caused the problem)?
View 1 Replies View RelatedCannot Communicate With Primary DNS Server After Sleep Mode?
Apr 13, 2012So whenever I put my desktop to sleep and then turn it back on, I cannot connect to the internet. My laptops are fine and can connect to the internet w/ the wireless however.When I have windows diagnostic run a troubleshoot and repair, it tells me it can't communicate w/ the primary DNS server and that resetting the Local Area Connection will fix it (And it does).If I restart the computer, it seems to fix this problem as well.I don't get why it can't communicate w/ the DNS and that I have to manually reset the LAC everytime I turn on the computer from sleep mode.
View 3 Replies View RelatedWireless Does Not Automatically Reconnect Out Of Sleep Mode
Jun 28, 2011I used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
After Sleep Mode PC Lost Connection With Router
Jan 9, 2012I have TP Link TL-WR740N , Firmware Version: 3.12.11 Build 110915 Rel.40896n . All working fine , but one problem whan I put my PC to sleep mode , and roter stay working , after when I awake PC it lost connection with router !
View 2 Replies View RelatedHP C4005 - Disabled Sleep Mode On Printers
Apr 30, 2013I am completely baffled by what is going on, on our network. We have four HP C4005 Printers. All of them connected to different switches around the network. About every 1-3 hours they all give the error 49FF09 (which is pretty vague, basically a network connectivity issue). Have to reboot to get rid of the error, then it will work again for an hour or so and give the same error (whether print jobs have been sent or not). This started a few days ago out of no where.
I am starting to think its an issue with the network, because they will all go offline at the same time. If I run a constant ping to them, they will all go offline at the same time and return the error. We use all cisco equipment. If I check the port statuses they all say up 100 full with no errors.
I have tried disabling sleep mode on the printers, turned off multicasting, updated firmware for printer and for jetdirect, and used different drivers.
Chrome Stops Downloading When Computer Is In Sleep Mode
May 15, 2011I am trying to download large files which are taking about 3-8 hours to download. I don't have that much time, so I have to put my computer into sleep mode. Now, the problem is, I put it into sleep mode, turn it back on, Chrome says the downloads are finished. I open one of them, and it says the file is corrupt.
View 14 Replies View RelatedCisco :: Aironet 1210 - Sleep Mode Causes 0.0.0.0 Dot11 Association
May 20, 2012I'm using aironet 1210, 1130, 1100, 1040 autonomous mode, in a University campus network with thousands of daily user.We're using RADIUS authentication and AES/WPA2.In the past, there were some major issues with traffic (broadcast / multicast) in the wireless networks, that would spread all around the campus causing excessive processing at the access-points.To solve the problem we decided to implement access list at the radio interface to drop all the unwanted traffic. [code]
I'm pretty sure this is caused by the ACL (I've tested removing the ACL and the issue never occurred) but I can't just get ride of it.
Any alternative way to drop broadcasts?
Linksys Wireless Router :: E3000 Lost Connectivity When Go Into Sleep Mode
Apr 1, 2010I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies View RelatedLinksys Wireless Adapters :: Bridge Goes Into Sleep Mode / Loses Connection Back To EA6500
Feb 25, 2013I use a WUMC710 bridge with desktop PC and a Printer connected to it. When those two devices have been inactive for a while the bridge goes into sleep mode and loses the connection Back to my EA6500. Trying to print something from wireless devices connected to the 6500 elsewhere in the network doesn't "wake up" the bridge. Ihave to unplug the power supply and restart it.
View 2 Replies View RelatedDell :: N5010 No Automatic Internet Connection After Sleep / Hibernate
Oct 2, 2011My laptop is an Inspiron N5010 running the standard Windows 7 64bit. When returning from sleep/hibernate, the internet wont connect automatically. And there is a little red cross over the Internet access icon in the bottom left.After I click to connect to the network it still cannot make the connection. And a yellow '!'' appears over the icon. After I click 'Troubleshoot problems" it will make connection though it can take a minute till its up.
I have checked the option to automatically connect to the network in range. And this used to work fine, but somehow it doesnt work correctly anymore.I have the latest bios and network drivers already.
Dell :: D610 Intel PROSet - Wireless In Windows Mode Not Picking Up Network In Range
Apr 16, 2012D610 - Intel PROSet
tab: Advance>>"Use Windows to manage WiFI" (F10)
When in Windows MODE the view network in range does NOT pick up anything even though the connection still exists.
How do I configure to see the networks in range ?
Dell :: Vostro 3350 - Wireless Card Not Recognized After Sleep / Reboot
Feb 17, 2013I have a dell vostro 3350. I use it with both Windows and Linux OS (Mint, Ubuntu).
Recently I faced an issue with my motherboard (I guess it was a matter of short-circuit) so I called the Dell assistance and they quickly came out and substitute my motherboard. After that intervention, my wi-fi and figerprint reading stopped working at all. So I called again Delle assistance and they substituted both the wi-fi and the fingerprint reader. Everything seemed to work fine... since my PC went in hibernate mode.
In fact now the wi-fi card is disabled (not even seen by the OS) after the PC goes in sleep/hibernate mode or even if it is turned off and than on again. I need to turn off and on the PC at least one more time the PC in order to make the wi-fi card found (and working) again.
I checked with all the three OS I have in my PC so I guess the issue isn't related to the drivers. On the other hand, it looks like the wi-fi works totally fine... when it works. It is quite a systematic effect and not related to bumps or mechanical sullicitations, so I guess it is not a matter of wrongly-connected card either..
Dell Studio Wifi Is Not Connecting
Jul 28, 2012I have been suffering with WiFi problem since last week, I am not able to connect to WiFi but all connections are visible. I called up my ISP guy to replace the modem but still I was not able to connect to. Yesterday I called up dell (my system is under complete cover), they have tried several things and I was sitting next to my internet modem It got connected. Then to be ensured I restarted the system and my laptop got connected to WiFi. When I moved bit far away from WiFi again the same issue I am not able to connect to.
View 1 Replies View RelatedDell :: Using Wake On Lan On Studio XPS 1645
Jan 29, 2010I was wondering if you can use wake on lan on the studio XPS 1645.. i've been looking all over the internet but couldnt find anything usefull & the dell email option wasnt working.
My Networkcard : Intel(r) WifI Link 5100 AGN
Broadcom Netlink (TM) Gigabit Ethernet
note: i couldnt find the WOL option in bios :(
Dell :: Studio XPS 16 Bluetooth Not Working
Nov 10, 2009I just received my XPS 16 and I was informed that it had a built in Bluetooth. I purchased a bluetooth mouse and tried to use it, but I am unable to get the computer to turn on the Bluetooth device. Had Dell support look at it, but the guy passed me off to someone else. So I still do not have this working. Is there an updated driver required to get this Bluetooth working.
View 4 Replies View RelatedDell :: Studio 540 - Wireless Card
Jan 5, 2009I have a new Dell Studio 540. It is presently plugged into a wired router via an Ethernet cable. However according to the documentation I should also have a wireless card fitted. It should have the following fitted:
Wireless Network Card 1505 PCIe 802.11n
How I find out this information.
Dell :: Wi-Fi Router For Studio 1749?
Mar 12, 2013WiFi issues with his Dell Studio 1749. He has a Siemens SE587 ADSL modem/router which supports Mixed, B_only, G_only WiFi modes. The laptop has a Dell wireless 1397 WLAN mini-card which supports Loose 11h, Loose 11h+d, and Strict 11h WiFi modes. No matter what combination of modes I configure in the router and the laptop the wireless connection on the laptop only ever comes up as 1MBps or 2MBps (full strength signal, laptop right next to router). By contrast my ageing Dell Vostro 1700 always connects to the same router at 54MBps.
So I'm guessing that there is some incompabitility between the router and the laptop. We're happy to replace the router, especially as recently the ADSL side of it appears to have gone a bit flaky. I've scoured the 'net and cannot find any router which claims to support 802.11h, so (a) what should I buy and (b) how can I be sure it will work at a sensible speed with this laptop given that the one we currently have won't?
Dell :: Can't Launch Wi-Fi On Studio 1537
Aug 10, 2012I had installed Linux mint 13 on my notebook, after he start desktop i have noticed, that wifi light is off.
I tried to run it, but .. I don't know, button doesn't work.
Now, I'm not sure - hardware problem or linux/driver problem. Wifi light is off and I'cant even launch it.
Dell :: Studio 15 - How To Get Bluetooth Option
Apr 16, 2013I had purchased Dell Studio 15 in 2009-2010 and before few days back i had formatted my system and installed Windows 7 ultimate SP1. Now i am not able to get the option of Bluetooth. i am sure the issue is with driver of it. Some way to reinstall the driver or make it working properly.
View 2 Replies View RelatedDell :: Studio XPS 8100 Network Driver
Jul 5, 2012I had a hd crash and had to re-installl Window7 on my Studio XPS 8100. I've installed all the drivers from the dell site as well as the H57 chipset drivers from Intel. I still have 2 devices that won't install (Ethernet Controller and PCI Simple Communication Controller). I can't get on-line.
View 1 Replies View Related