Linksys Wireless Router :: SE2500 Crashes Windows 7 Dell XPS 420 Computer?
Oct 19, 2011
DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime
The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
View 3 Replies
ADVERTISEMENT
Feb 8, 2012
DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
View 1 Replies
View Related
Jul 28, 2011
I had a little one port wireless switch that I just upgraded to the SE2500. The problem is my home audio reciever and squeezebox aren't connecting to my network now that I upgraded. The E3000 isn't seeing the SE2500 at all, nor is it seeing the devices connected to it. Everything else that's wirelessly connecting to the E3000 is connecting just fine (Tablet, Laptop, Desktop, etc.) but anything connected via wired to the SE2500 is not showing up whatsoever.
View 8 Replies
View Related
Jul 3, 2011
I cant see in my network the devices connected to SE2500 just the SE2500 itself. The internet access of the devices connected to SE2500 is working correctly. Is this a problem?
View 3 Replies
View Related
Jul 21, 2012
indows 7 Studio 1458 Crashes when entering Sleep Mode
View 2 Replies
View Related
Nov 7, 2011
I saw a thread from early 2010 which described the issue I am currently having to a T. I am on a Belkin Wireless G with Mimo router and it runs perfectly either on LAN or WLAN, until my new roommate's MacBook gets on there at the same time. As soon as the MAC connects, I get a blue screen of death and the PC restarts. I have been battling this issue for over a week now and have absolutely narrowed it down to the Mac/wireless area.
I have already uninstalled/reinstalled my wireless drivers and thought that had fixed the issue(it worked fine for 4 days), until the roommate returned from out of town and connected the Mac to the Wireless....then WAMMO, like clockwork, back came the BSoD. This seems like a very unique problem, as I have done many searches online and the one I mentioned on here is the only one I could find that accurately described my issue.
For reference, I have posted the link to the previous case below. Unfortunately, no solutions, other than reinstall drivers (which I have already done) are posted. I tried everything in that thread and my settings appear to all be the same as his. Is it possible this is just some rare Windows 7 glitch that has never been resolved?
[URL]
View 3 Replies
View Related
Mar 6, 2011
New Cisco E2000 (wireless N router) not compatible with WMP54G (2.4GHz) adapterCan't find new drivers. Crashes computer to blue screen. Can the two be made compatible? Windows XP Home and Pro (both computers have WMP54G and blue screen).
View 4 Replies
View Related
Oct 25, 2012
Essentially when my friends computer disconnects from the router, everyone elses computers cannot access the internet, even though windows says they are still connected.
View 1 Replies
View Related
May 13, 2011
uupon starting my computer a blue screen appears and it crashes, I shut the entire system down and restart in safe mode.
View 1 Replies
View Related
May 28, 2012
I have a problem to install linksys router driver to my win7. It crash on 13 or 14%. It say's that app crashers. What i have to do?
View 3 Replies
View Related
Sep 5, 2011
In hopes of fixing some "flaky" connection issues with my WRT54G V2 Wireless Router, I downloaded and applied the new firmware version released on 08/18/2011, Ver.4.21.4 for my Version 2 Router. I downloaded, went through the application process using the router's firmware update process, it said it was successful and then the router restarted and didn't work. Couldn't ping the address, constant flashing Power light, no response at all from router. Tried again, same result. Performed hard reset, same result. Tried a few other recovery techniques found on the web with no success. Finally I did the process found here [URL] This reset the router and I re-uploaded this same 2011 version. Router still broken. I ran through the process again after downloading an older version of the firmware, specifically version V3.1_4.00.7, the upload ran, and the router worked again! This was proof to me that the newest version completely BRICKED my router. I'm so relieved I was able to reset the router and manually recover, but most will never try this. I recommend Cisco retest this ASAP and pull the new release for the V2 router until they get this resolved!
View 9 Replies
View Related
Aug 29, 2006
I am attempting to setup a wireless access pointand want to deny access to a group of IP addresses. When I go to Wireless, MAC setup, Deny or Allow, and select "Edit MAC Address List" my browser crashes. I have tried this on two different Linux systems and three browsers, Firefox, Mozilla, and Seamonkey.Tech Support tells me to downgrade to Firmware version 4.30.2, the only compiled version available on the Linksys website, but with no way to go back to 4.30.5 if the problem isn't fixed or if worse problems come up I am reluctant to try this fix, The only other suggestion Tech Support offered was to replace my WRT54GL with a WRT54G.
View 3 Replies
View Related
Dec 28, 2012
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies
View Related
Nov 6, 2011
For a while now, my wireless network at home has been very unreliable. I posted on these forums before, asking for assistance to fix crashes that seemed to be random. I was largely unsuccessful, and the problem continued. However, as I continued to experiment with different methods to keep my network up and running, I noticed that as long as I had at least one device connected to the network around-the-clock it never crashed. This was easy enough, as I own an iPod touch and a dock (I would leave it sitting it the dock unlocked all the time). But it's annoying to never be able to leave the house with it, and I'm ready to finally get a solution to the problem once and for all. I would prefer not getting a new router, but if worse comes to worse I will.
To sum it up:
-Works perfectly (when up) at full speed, never crashes unless there are no devices connected to it.
-When it does crash, it is very difficult to 'coax' it back into working again; it's been down for weeks at a time before.
-For some strange reason (and maybe this is a clue), newer game systems such as a Nintendo DSi or PS3 can make it start working again. I, of course, own neither of these.
-I'm using a WRT160N V3, latest firmware as far as i know.
View 9 Replies
View Related
Oct 27, 2011
I have an E1000 that is connected to my main computer via Ethernet and have found that it crashes almost every time I run a particular type of operation.I'm testing software and running PHP scripts that invoke cUrl to fetch data from a few different web services via SSL. I would say that at least every other time one of these operations begins, the router crashes -- I am unable to ping its internal IP and I have to power-cycle it to get back up and running.
I don't experience the crashes in any other context and I use the router all day long. I'm one release behind on firmware but the release notes on the most recent version don't suggest that upgrading would make any difference -- no mention of any bugs fixed, for example.
View 3 Replies
View Related
May 11, 2011
If I have anything else connected to the network (anything being my Xbox 360, or my smartphone) and I turn on/wake up my computer, the entire network crashes and I have to power cycle the router and modem in order to get it to work again. What would even cause this? I often forget to turn off the wifi on my smartphone before I turn on the computer, which results in a lot of very tedious power cycling. It's also frustrating if I'm playing some vidya on the 360 and my wife gets on the computer, resulting in me getting kicked off and her unable to even do what she wanted to do in the first place.
The stranger part is that if I have my computer already on, and I turn on the 360/smartphone, it works fine. So there's something going wrong in the process of my computer connecting to the network, I guess. I have set a static IP, and I also made sure to turn off the energy saving feature of my wifi card, but neither of those things solved the problem.
View 8 Replies
View Related
Oct 12, 2012
I have a new dell computerMy problem is the computer doesn't start-up and instead he pop-up the error message "BOOTMGR is Missing"I tried to install "windows 7 enterprise" but no success the problem has back again.
View 3 Replies
View Related
Feb 13, 2013
Region : Poland
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP :
Recently I've switched to Windows 8 Pro 32bit (from Win XP) and since that moment I have problems with USB Printer Controller Utility. I was able to print test page successfully but printing larger documents (for example PDF file, about 15MB of data needs to be transferred to the printer) results in blue screen of death. Additionally if USB Printer Controller Utility is started "automatically wit Windows" switching user results in BSOD about 30 seconds after the second instance of Printer Controlled is loaded. Right now I've not found any way to use USB Printer connected to TD-W8968 while using W8. WhoCrashes states that the crash cause was Printer Controller Utility. It is very easy to reproduce the crash.
Both firmware and the utility was downloaded from [URL] According to this webpage TD-W8968_V1_USB Printer Controller Utility( For Windows) works in Windows 8.
[URL]
View 3 Replies
View Related
Apr 15, 2013
I have just bought an X1000 box, it seems to be randomly locking up and the only way around the issue is to reboot. I have also noticed it can't seem to handle streaming video either.
My ADSL has been checked and all is OK and if I don't stream video generally things seem OK for a couple of days. If I run a continual ping to the unit you can see that now and again the request times out but then some times comes back and other times I need to reboot again. The log file seems to show very little either.
View 1 Replies
View Related
Mar 2, 2011
I want to use this adapter on a computer with Windows 7 Home Premium 64bit OS.Downloads lists versions V1.0 and V3.0 for this adapter. How can I determine the version I have?V1.0 list no driver for Win 7 64bit. V3.0 list a driver for Win 7 64bit.Research I found looks like the adapter is not computable with Win 7 64bit.
View 2 Replies
View Related
Mar 26, 2011
I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
View 5 Replies
View Related
Jun 6, 2012
A friend of mine has experienced a crash with her Toshiba Satellite while watching a vid on the net.It froze completely so she did a battery pull and re-booted the system.After booting up Windows 7 after the password screen the laptop crashed completely.
The same problem occurred once again so she loaded Windows in safe mode with networking. The computer seemed to function normally so she rebooted into normal mode.Since then everything appears to be functioning except the Wifi (that was used in conjunction with an ADSL net connection).The LED where the Wifi switch is no longer lights up and no Wifi connection can be made.I suspect that as a result of the initial crash the connection settings may have been reset but perhaps the Wifi in the laptop itself has just died and needs to be repaired.
I know it could just be corrupted drivers or something - I updated the drivers for something called "Microsoft Virtual Wifi Miniport Adapter" using the auto update feature in Windows Device Manager but it didn't solve the problem.
View 1 Replies
View Related
Feb 18, 2012
I am trying to use download manager to put drivers on a external drive but every time i try to download them it says no file selected.
View 1 Replies
View Related
Dec 22, 2011
My WAG320N has developed a fault where by after 1, 2, maybe 3 clicks on the web interface and the router reboots. The browser can no longer connect until it is closed and reopened (firefox). Firmware is: v1.00.12
Interestingly, if I use a different browser it doesn't seem to reboot and I can click away for ever. However, firefox reproduces the problem every time. FIrefox version is 7.0.1
View 2 Replies
View Related
May 9, 2010
I am experiencing loss of internet access when browsing to amazon.com. In addition to losing internet access, I am unable to connect to my BEFSR81 router when this happens. To resolve I have to walk over to my router and reset it by cycling the power.
This issue has been reported by other users of the BEFSR81 too: URL
Details: My BEFSR81 is version 3.0 and is running firmware version 2.51.4
View 9 Replies
View Related
Apr 10, 2012
have a Dell laptop running Windows 98 on it and I'm trying to get a Linksys WPC54G ver. 4 PCMCIA adapter working on it. I finally got the adapter installed along with its device drivers and other required software such as IE6 and I have it connected to the router in my house. The only problem is, the card shows a connection between the card and the router but a broken connection between the router and the internet. I can't seem to figure out how to fix this considering all of the other wireless devices in our home (iPods, laptops, phone, tablets etc) connect to it which makes me think I have to designate (I'm no good at networking) an IP address or DNS like you would be able to on WinXP, Vista, or 7.I had a friend come over and he was looking through the admin settings on the router and said that it only supports WEP encryption, not WPA. The router is the standard router that Verizon gave us when they came in to install FIOS. The card says it supports WEP and WPA (Radius and PSK whatever that means) and I have it set to WEP and entered the password but I can't seem to get it connected to the internet. Would it work if I bought a new router or is there some kind of thing I need to punch into the Internet Protocol properties like you would on later OS'?
View 2 Replies
View Related
Sep 26, 2012
So basically, everytime i play a game (Grand Theft Auto), i can be on it for about 10 seconds before it makes a weird sound and then i lose internet connection. I have re-installed my game, updated my drivers, and i do not have any viruses. Also, i use a Dell Inspiron 1525 (i know its a horrible pc), once i lose connection i have to restart my PC just to get my internet connection back, and when it is done restarting, it says there is a problem with my WLAN card.
View 5 Replies
View Related
Dec 21, 2012
trying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies
View Related
Jan 30, 2010
My WET610N crashes when I'm using it behind my PS3 while I'm watching videos in DLNA with the PS3 Media Server. Sometimes I can watch it during 1 hour without problem, somtimes it crashes and restart after 10 minutes of playing already. The restart is taking quite a long time, something like 2 or 3 minutes to get back to a Wifi connection. The router is still working properly while the WET610N is restarting.
The firmware is the latest 1.0.03, the settings are made for Video Access mode. I'm not using any encryption, only MAC address filtering.
My Wifi router is a Belkin N+ (F5D8235-4 v2000).
View 6 Replies
View Related
Dec 27, 2012
I am trying to make my LAN to work at home. Its pretty small but I am bearly an smart user, noobie if so.I have a Motorola Cable Modem model SB5101 receiving the internet from Shaw Cable.from there I have an ethernet cable to my switch (Cisco SE2500) from there I have two ethernet cables coming out, one goes to my PC and the other one goes to an Airport Extreme so our laptop.I am just here double checking this info... sice this is an unmanaged switch I guess there is no way of accesng an interface to make this happen.I just hate spending the money in something I wont be using just because I dont know whats going on.
View 7 Replies
View Related
Feb 3, 2013
I have a wgr614 V6 router, yes its old. I had 3 devices connected to it just fine before without any issues. But now It only allows my laptop, when I try to connect with my ipod touch or desktop, not only does it fail, the entire network crashes and my laptop loses it and its gone. It then takes about 2 minutes to come back up. So whenever I attempt to connect with another device the network crashes. so right now only my laptop is connected.I downloaded & updated to the newest firmware, did not work.I tried resetting the router, and made the network all over again, did NOT work.
View 7 Replies
View Related
Sep 23, 2010
I recently upgraded the firmware from 2.0.2.1 to 2.0.3.3 and when the router rebooted the interface was missing many items. On the basic setup page the boxes were missing to set the local ip address, subnet mask and anything below that. On the Wireless Security page the security mode box was half it's size and did not have any options in it. The wireless isolation wpa algorithm, preshared key and key renewal boxes were missing too. I rebooted the router and still got the same thing. I was able to get into administration and reset to the factory default. Once the router rebooted I was unable to get into the interface at all. It wouldn't come up at all. The power and light were blinking but I was unable to connect to it. I tried to connect with 192.168.1.245 and the one I had set manually but no luck with either. I was able send back the router for an exchange with Cisco. I received the new one today. It started up and everything worked great. I decided to try the firmware upgrade again. I went from the firmware version that was on there(I didn't right down) to 2.0.2.1 and the upgrade worked as the other 3 I have. I than tried the 2.0.3.3 upgrade and I got the same thing as the other router I sent back. I have 3 other routers in place that I will not be upgrading at this point. I should not have tried the upgrade again on the one today but being a bank the examiners like everything up to date and it's part of the monthly check.
View 2 Replies
View Related
Jun 4, 2011
I have a wireless network using an Apple Airport router. There is an iMac, an IBM Think Pad and a Dell XPS 410 tower (both running XP) on the network and all were working until this week. All of a sudden I can not get on the internet with the Dell PC. When I try to log into the router, it searches for a connection, but never is able to attain one. My network is displayed and I am using WPA security and have been entering the correct key. I have tried reinstalling the drivers, but with no success. I believe I was able to access a local unprotected site, but after being connected a pass word was required. I also tried ipconfig, but it just flashed on and then immediately off.
View 5 Replies
View Related
