I cant see in my network the devices connected to SE2500 just the SE2500 itself. The internet access of the devices connected to SE2500 is working correctly. Is this a problem?
View 3 RepliesFor a while now, my wireless network at home has been very unreliable. I posted on these forums before, asking for assistance to fix crashes that seemed to be random. I was largely unsuccessful, and the problem continued. However, as I continued to experiment with different methods to keep my network up and running, I noticed that as long as I had at least one device connected to the network around-the-clock it never crashed. This was easy enough, as I own an iPod touch and a dock (I would leave it sitting it the dock unlocked all the time). But it's annoying to never be able to leave the house with it, and I'm ready to finally get a solution to the problem once and for all. I would prefer not getting a new router, but if worse comes to worse I will.
To sum it up:
-Works perfectly (when up) at full speed, never crashes unless there are no devices connected to it.
-When it does crash, it is very difficult to 'coax' it back into working again; it's been down for weeks at a time before.
-For some strange reason (and maybe this is a clue), newer game systems such as a Nintendo DSi or PS3 can make it start working again. I, of course, own neither of these.
-I'm using a WRT160N V3, latest firmware as far as i know.
I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies View RelatedI had a little one port wireless switch that I just upgraded to the SE2500. The problem is my home audio reciever and squeezebox aren't connecting to my network now that I upgraded. The E3000 isn't seeing the SE2500 at all, nor is it seeing the devices connected to it. Everything else that's wirelessly connecting to the E3000 is connecting just fine (Tablet, Laptop, Desktop, etc.) but anything connected via wired to the SE2500 is not showing up whatsoever.
View 8 Replies View RelatedDSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime
The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
I've used Netgear & other routers for years; I was able to see the devices connected over ethernet & wifi through the router configuration utility. Cisco's interface looks poor; there is no way to see the connected devices.Many of the devices I have have a 5 Ghz radio and some don't so i need to see at what speeds they are connecting at.Or does Cisco not provide this utility? I am surprised that a high-end product from Cisco does not have this function.
View 9 Replies View RelatedHow can I tell what devices are connected to my WRT54G?
View 4 Replies View RelatedSo i just set up the Linksys E2500 and it shoes 8 devices connected to my router. How I can see what devices are connected?
View 1 Replies View RelatedI've got the E3000 set up and working. What I'd like to do now is monitor all the devices' connectivity to it. The bandwidth it consumes and stuff. Is there a way to do that on my router?
View 6 Replies View RelatedHow can I tell the names of the devices that are connected to my E2000 router? Cisco connect says I have 4 devices connected but I only have 3. I am trying to figure out where the 4th device is coming from.
View 9 Replies View RelatedI have an EA 4500. Tonight I was trying to see what devices were connected. The window shows 0 devices connected, although about 20 devices are connected and working. When I click on "Devices Connected", I get the spinning wheel, and after multiple attempts by the application to list devices, I receive a message that the application does not work. I have the latest firmware installed. This is a recent issue. I have not made any changes to network configuration, nor to any of the devices that all have internet access. I will note that I did not set up a separate SSID for each band. But that did not seem to be an issue in previous months. I also cannot access the router ui from my windows 7 desktop. I can access the abbreviated ui through my Android phone. I tried connecting through smart wi-fi and by ip of the router. I just get the endless spinning circle of dots. I am running Windows 7 all up to date. All drivers are up to date.
View 7 Replies View RelatedMy EA6500 are not displaying all the connected network devices on in the GUI. How do i force this? Is it a bug? How can I make sure all my devices are showing in the GUI?
View 5 Replies View RelatedI am trying to find out what devices are connected to my router. I have had some illegal downloading from my IP address but it has not been done from my computer. It is showing in Cisco Connect that I have 15 devices connected, I should have no more than 6 devices connected so trying to figure out who is connected on my computer.
View 9 Replies View RelatedMy EA4500 with the latest firmware will only display nine connected devices at a time. It also seems to randomly shuffle which devices to show as connected, even though several more than nine are connected and online. Does anyone else's device list limit itself to displaying only nine devices? The Linksys phone apps also display a maximum of nine devices. I like the routers new user interface and understand that it has received a lot of praise, however this is the second bug I've experienced in as many months (the first being a failure of the device list to update once devices are upgraded to Windows 8, requiring a reset to default settings in order to fix).
View 5 Replies View RelatedMy E3000 has been working fine with 1.0.04 build 6 FW. Recently some devices (kindle, iPad) can't connect to internet while connected to E3000 via WiFi network. Had a look my E3000 router IP is 192.168.0.1 but those problematic devices has IP 192.168.1.XXX allocated by DHCP not sure why. Currently I manually set up static IP 192.168.0.XXX for those devices.
View 1 Replies View RelatedI'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?
E3000WRT-54GWVC-80N
I have a E1200 router and it's pretty good however I've noticed that there are 12 devices connected to my router when infact there should only be 4 devices connected. I would like to see all the devices that are connected and disconnect the ones that don't belong
View 1 Replies View RelatedI can get regarding using the Collobos Fingerprint software through my WRT150N router. I'm using Windows XP SP3 and immediatly after installing (which went extreamy well) it immediatly found and listed all of my home network printers. All of the wired and wireless windows based systems in my house can see and print to the printers without any problem. However, getting ANY of my apple devices (iPad, iPhone etc ) to print will not even show them as listed on the device when I select print on the devices. Collobos says that I have to make sure that Ports UDP 5353 doe Bonjour and TCP 6361 for FingerPrint need to be open both ways for it to work, I have no problem getting into the router settings and have set them up as stated above in Port Range Triggering and enabled. Also made sure Filter Multicast was not check marked in Security. Unfortunatly, that doesn't seem to work as I had hoped.
View 3 Replies View RelatedI have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly. New laptops, PS3, friends laptops. Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.
View 9 Replies View RelatedWe have Cable DSL modem that connects to router. One wired connection from router to PC. Wireless devices are 2 iphones 2 ipads and 2 imacs. Constantly having to power the WRT120N off and back on to regain connectivity.
View 2 Replies View RelatedI just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
View 3 Replies View RelatedI have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
View 9 Replies View RelatedI have a E4200 router. The firmware version is 1.1.02. I am reluctant to upgrade; however, my iMAC is picking up the 5GHz broadcast setting, but the rest of my wireless devices only recognize my lower 2.4GHz setting. I have changed channels, my router address is changed because it conflicted with my Verizon DSL. I do not have FIOS. What can I do to fix this problem. I have an ipad, 2 iphones, 2 ipod touches, 2 laptops (PCs), an XBOX, and a PS3 that needs to connect to a higher broadcast. The connections are slow and at times get dropped.
View 4 Replies View RelatedI am connected to my ISP via Nanostation 5 IP Add:192.168.10.186 S.M: 255.255.255.0, the Nanostation Lan cable is connected to the WAN port of my Linksys E2000, I am using a PPOE connection with my ISP, the Linksys broadcast a new network using DHCP service, The broadcasted Network is 192.168.5.X 255.255.255.0, the thing is i am unable to get the Nanostation GUI, when i replace the Linksys with a TP-Link router i have no such problem becuase in TP-Link i can add an additional IP address which is the Nanostation's IP,Is there any way i can get the Nanostation GUI?
View 3 Replies View RelatedI have N600 HD Wireless dual band N Router. have successfully installed the router on wireless mode, however I have the following problem in accessing the storage devices connected to the Router.I can see the storage devices connected to the Router in the "Belkin USB Print and Storage center", but when I double click to browse the devices, it does not open up.
View 1 Replies View RelatedI wounder if there is any way to ping the local deviceses connected to a network hosted by a Cisco 1921 router? I wan't to be able to ping the device(computer name) but currently cant do that.
View 1 Replies View RelatedWD essential 2GB hard drive connects OK through cisco connect but when I click on the shortcut or try to access the drive I get access denied duer to permission to the ip address
View 4 Replies View RelatedAfter upgrading two laptops to windows 8, they will no longer appear as a connected device under the "device list." They both access the router via wifi and wired, but neither appear in the device list any longer. I've rebooted the router twice, as well as both computers, disabled/re-enabled their wifi connections, but no effect.Every other non-Windows 8 device still appears normally under the device list.
View 3 Replies View RelatedI have a big house so I have a e4200 on one end of the house upstairs and the WAP610n on the other end downstairs linked via CA6. I am having no issues with Laptops etc..just with Apple devices. I spent a lot of time with chat support (waste of time). WAP was flashed with latest firmware via hard wire no devices connected to wireless, has same ssid and security settings as router running on 2.4 ghz wpa2 personal AES. I am using 2.4 due to iphone4 does not support 5ghz and wap does not support dual band (another bummer). I am using AES instead of TKIP/AES mixed mode due to apple devices will not acquire dhcp with this setting and if they do they lose it right away. I have tried everything imaginable with the settings even changed beacon to 75, 50 RTS to 2304 etc...the current setting are the only ones that seem to work the best however when i run speedtest.net LA server or SD server the performance is horrible. On windows laptop i can achieve 27mbps down 2.5mbpsup, my apple devices use to achieve very close numbers to that on a simple configuration with two Dlink DGL-4300's one as router one as AP (G mode). So two major issues i have noticed is WAP610N has issues passing DHCP to apple devices and has extremely poor performance. So my question is will there be a firmware to correct this issue or a new hardware version that i can exchange this for if I RMA it or would it be best to call it a day and just get a E3200 and use it as a real simultaneous dual band AP???
View 9 Replies View RelatedI have noticed from time to time I get many (15-20) "network devices" in the Device List with no MAC address. I notice this mainly when managing Parental Controls. I go and clean up the Device List and days later they reappear. Another interesting thing is that the computer I am writing this with (through the router) does not show up in the Device List and I have an IP address from the router. I have the latest firmware 1.1.28.146856. Does anyone else see this on their EA6500?
View 2 Replies View Related I have 3 computers in total: 2 desktops and 1 laptop.
1. My primary PC is connected physically to my router.
2. My (downstairs) laptop is connected to the wireless.
3. My other PC connects to the wireless network via USB wireless adapter.
I was having issues getting #3 connected to the wireless network. I used the Wi-Fi Protected Setup™ PIN number provided to me by the Linksys Wireless Manager to no avail. The E3000 router and #3 could never find each other.After calling support, it turns out that more often than not, "other" wirless management software (in my case Linksys Wireless Manager that came with the USB device) was interfering with my Windows XP Wireless Manager.Rule of thumb: Always let your native operating system manage the wirless networks that are available to it. It does a far better job and is 10x more reliable than software provided by 3rd party vendors.Specific to my case: Windows XP, I had to enable the Windows Wireless Manager and uninstall the Linksys Wireless Manager Software. Here it is...Enabling Windows Wireless Manager These directions are for Windows XP:
1) From the Windows Start menu, click Control Panel.
2) Click Network and Internet Connections.
3) Click Network Connections.
4) Right-click the icon for your "wireless network connection", then click Properties.
5) At the top of the window, click the Wireless Networks tab.
If the "Wireless Networks" tab does not appear between the "General" and "Advanced" tabs, you are not on/in the wireless network connection settings:a) click cancelb) Right-click the icon for your wireless connection and choose "Enable". c) return to step 4 6) Check the checkbox next to "Use Windows to configure my wireless network settings".
These directions are for Windows Vista:
1) Go to the Windows start menu and then the control panel.
2) Open Network and Sharing Center.
3) Click Manage Network Connections (from the left side menu).
4) Right click on the network adapter 'Wireless Network Connection' and choose "Properties" and click "Continue".
5) At the top of the window, click the "Wireless Networks" tab.
If the "Wireless Networks" tab does not appear between the "General" and "Advanced" tabs: a) click cancel b) Right-click the icon for your wireless connection and choose "Enable". c) Return to step 4
6) Check the checkbox next to "Use Windows to configure my wireless network settings".
I was requested to connect 2 WRT54G devices in our network with same ip range.
View 2 Replies View RelatedHow do I view (from my desktop) what devices (iPods/iPhones) are connected to my wireless network? I have several questions re: control over my network, but I think this question is the first thing I need to know.
View 1 Replies View Related