Linksys Wireless Router :: EA4500 Unable To Access Devices Remotely
Aug 19, 2012
I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
I use the Smart Wi-Fi app on my iPad3 (IOS 6.1.3) to access my EA4500 remotely.When I want to add a port forwarding, it shows always 192.168 as start of the ip address related to the ports. But I have a 10.71 network installed and cannot change the 192.168 to 10.71. I suppose this is a bug.
I have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly. New laptops, PS3, friends laptops. Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.
Where can I find a log or list of devices that attempted to access my EA4500 wireless network?I am using the cloud services to monitor my EA4500 usage in an apartment environment.
trying to stream movies from the USB drive pluged into EA4500 using 3G or remotely. I got Media Server (DLNA) turned on and FTP Server setup. I also setup Dynamic DNS. I can managed to see the media server on iPhoto using WIFI connection with UpnPPeek. I'm wondering if it is possible that any iphone apps like Air Video can be able to stream movie remotely without turn on the computer?
I have had my router for about a month and all the wireless lan stuff seems to be brilliant. Recently I signed up to an ISP (Plusnet), and can't access most websites. The ISP has told me that I should take this up with my Router company. I seem to be having the exact same problems as this guy was having [url]....
I want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
I am not able to access https sites (like banking etc.). Once I plug my old router back I have no such problem. I guess it must be router settings that I cannot figure out.
I'm using the EA4500 router with Cisco Cloud Connect. I've noticed under Devices I'll see devices named "Network Device". They have a generic MAC address with something like "00:00:00:00:2F". They will have an IP that's already assigned to another device.
I have an EA 4500. Tonight I was trying to see what devices were connected. The window shows 0 devices connected, although about 20 devices are connected and working. When I click on "Devices Connected", I get the spinning wheel, and after multiple attempts by the application to list devices, I receive a message that the application does not work. I have the latest firmware installed. This is a recent issue. I have not made any changes to network configuration, nor to any of the devices that all have internet access. I will note that I did not set up a separate SSID for each band. But that did not seem to be an issue in previous months. I also cannot access the router ui from my windows 7 desktop. I can access the abbreviated ui through my Android phone. I tried connecting through smart wi-fi and by ip of the router. I just get the endless spinning circle of dots. I am running Windows 7 all up to date. All drivers are up to date.
I just purchased a Linksys EA4500 (firmware is up to date). However while it set itself up wonderfully. I cannot get my wireless devices (specifically my apple tv) to see my NAS or my itunes PC, My ipads can access the NAS if i put in the correct address but not automatically.
Everything is connected to my cisco switch that is hardwired (2 xboxes, 2 ps3, 3 tv's, Wii, network audio receiver, 2 NAS, printer, 2 computers, etc). I disabled the Wi-Fi on the bell router. On the wifi are a few ipads, 3 blackberries, 1 iphone, 2 laptops).I am fully aware that the reason the wireless devices cannot see the hardwired equipment is because it is on a different subnet.
However when i try and change the IP address of the router to 192.168.2.2 (putting it on the same subnet) the router must detect a conflict then changes itself to a class A address (10.x.x.x) OR i get an INVALID IP address. As well i have noticed an overall degradation in the speed of my network (all gigabit hardware with cat 6 cabling)
My EA4500 with the latest firmware will only display nine connected devices at a time. It also seems to randomly shuffle which devices to show as connected, even though several more than nine are connected and online. Does anyone else's device list limit itself to displaying only nine devices? The Linksys phone apps also display a maximum of nine devices. I like the routers new user interface and understand that it has received a lot of praise, however this is the second bug I've experienced in as many months (the first being a failure of the device list to update once devices are upgraded to Windows 8, requiring a reset to default settings in order to fix).
I just now installed a new EA4500 Router. It installed itself automatically without a problem, by running the setup CD. No devices other than my hard wired computer and modem are connected yet.
When I went into Start > Cisco Connect to look around and check it's version, etc., I immediately got a "There's an important update for your router" notice. My concern is not wanting to install The Cloud at this time (although I wouldn't rule it out later). There has not been a trace of it so far.
I currently have Firmware Version: 2.0.36.126507 and Software Version: 1.4.12100.0. What this Important Update may be? Is it the "dreaded" Cloud? I'd rather avoid the whole rolling back to pre-Cloud issue for now, if possible.
I have EA4500 router with latest firmware update. Cisco Connect Cloud behave strange. Some devices connected to the wireless router appear in CCC and some not. For instance, Iphone is visible, Ipad is not but both have normal accesss to internet.
I setup several devices in the Parental Controls to be blocked always. These devices are still able to connect to the router. I tried rebooting the router but the problem persists. I have two laptops and two iPod Touches that can connect regardless of the access restrictions.
I recently put in a surveillance system with remote access. I have an application on my android phone and it can be viewed by any browser. While I am connected to my network these functions work fine, on my phone and any desktop/laptop. The problem happens when I try to view remotely, off my network. I had this setup on my Netgear router before I got my new fancy schmancy Cicso router becaue the netgear wasn't cutting the cheese in keeping my wireless connectionstory.So here is what I got. I need 3 ports forwarded for this work, and how I got it work on my Netgear. I have these 3 ports forwarded as single ports. I have them forwarded in a range and I have port triggering turned on. No matter what or which combination of these few things I try, I can't access the DVR remotely, again unless I'm local to MY network.Some additional notes - the DVR has a static address and that address has been reserved in the DHCP settings of the router.
I recently bought a e4200 v2 and installed connect cloud. I have attached a USB drive to the router. I can connect to it by mapping a network drive on my windows 7 laptop. I can also access it as a media server through my iPad on the local wifi network. This way I can play the music on the USB drive through the iPad. The next thing I would like to accomplish is to be able to listen to the music on the USB drive through the internet (so remotely).
Just purchased a ea4500 router. Have setup multiple computers/devices already and works great. This computer (HP dv6000 running Win Vista home prem) however will not connect to the internet. It states that it is connected to the router (computer sees router), using the cloud connect app on my iphone i can see this computer, but will not allow access to the internet (local connection only). It works fine with the wired connection. When attempting to use the cloud connect software, it says it was unable to complete the install. Have attempted trying while connected by wire as well, same result. Have deleted the wireless connection and allowed software to find connection, still same result, cannot install. Wireless worked perfectly with previous router (WRT54G) three days ago.
just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
Very strange problem with an EA4500 running 2.0.37.131047. Set it up in no time with a Mixed network on WPA2 Personal, Internet's fine, but I can't see any of my wired clients. They don't ping at all. Even stranger, if I plug into another wired switch port with my laptop, I STILL can't ping the other clients. One is a NAS and one is a network printer so there are no firewalls involved. I power cycled the printer but in vain. I've already reset to factory defaults once, but that didn't work. I'm thinking I'll need to return it.
There are plenty of instructions to configure USB storage but there are no instructions on how to use it, specifically. Ok, so I have my ftp address, user name and password and tried to connect with Filezilla on my local network. Unable to connect. Also, the USB device does not even show up in Network settings. However, I am able to see the device as a media server from Sony Playstation.
I recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?
I have a EA4500 that I get error 2315 when I try to Delete,change name,or icon. I did a 30/30/30 and everything worked great,24 hours later I was back to error 2315. I tried re-flashing the firmware, but that didn't work. I get the same problems when I try using the Smart Wifi app. There are also times when I can not access the router using Smart Wifi unless I reboot the router when I get home.
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
After upgrading two laptops to windows 8, they will no longer appear as a connected device under the "device list." They both access the router via wifi and wired, but neither appear in the device list any longer. I've rebooted the router twice, as well as both computers, disabled/re-enabled their wifi connections, but no effect.Every other non-Windows 8 device still appears normally under the device list.
I can get regarding using the Collobos Fingerprint software through my WRT150N router. I'm using Windows XP SP3 and immediatly after installing (which went extreamy well) it immediatly found and listed all of my home network printers. All of the wired and wireless windows based systems in my house can see and print to the printers without any problem. However, getting ANY of my apple devices (iPad, iPhone etc ) to print will not even show them as listed on the device when I select print on the devices. Collobos says that I have to make sure that Ports UDP 5353 doe Bonjour and TCP 6361 for FingerPrint need to be open both ways for it to work, I have no problem getting into the router settings and have set them up as stated above in Port Range Triggering and enabled. Also made sure Filter Multicast was not check marked in Security. Unfortunatly, that doesn't seem to work as I had hoped.
We have Cable DSL modem that connects to router. One wired connection from router to PC. Wireless devices are 2 iphones 2 ipads and 2 imacs. Constantly having to power the WRT120N off and back on to regain connectivity.
I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
I have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
I cant see in my network the devices connected to SE2500 just the SE2500 itself. The internet access of the devices connected to SE2500 is working correctly. Is this a problem?
i have configured SSL VPN on Cisco ASA5510 which is working fine .My Users connected the VPN and access the servers remotely. But now i face one challange my users use PPTP VPN of the customer now a days configured at the Customer Network. When they Connect the PPTP VPN unable to Access the servers remotely defined on the SSL VPN Route.
