just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
View 3 Repliesjust upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
View 1 Replies View RelatedI absolutely need to collect the router logs and send them to a syslog daemon or via email.
View 9 Replies View RelatedI am having almost an Identical issue. It seems that I can do anything I want on the internet, but the second I open hotmail all the problems start. Issues occur on both FF and IE. As with you I am able to continue to get some information on sites that are currently open (for example I will get incoming IMs, although I cannot send replys, and my stream on facebook continues to update). Once this happens I cannot open any new webpage or use the wireless on ANY other device in my house (iphones and printer); wired devices seem to have no issues. I have done everything as far as resetting, updating firmware etc to my router with no luck. I have a netgear dual band router, computers with Windows 7 64bit. It seems that accessing Hotmail on the iphones does not trigger the same issue...
View 4 Replies View RelatedYesterday, I installed the N450 DB and it was probably the easiest install I've ever had to do. One problem though, I can now no longer send or receive email thru Outlook Express 6. Keep getting this message 'The host 'mail' could not be found. Please verify that you have entered the server name correctly. Account: 'mail', Server: 'mail', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D'.
View 3 Replies View RelatedJust purchased a ea4500 router. Have setup multiple computers/devices already and works great. This computer (HP dv6000 running Win Vista home prem) however will not connect to the internet. It states that it is connected to the router (computer sees router), using the cloud connect app on my iphone i can see this computer, but will not allow access to the internet (local connection only). It works fine with the wired connection. When attempting to use the cloud connect software, it says it was unable to complete the install. Have attempted trying while connected by wire as well, same result. Have deleted the wireless connection and allowed software to find connection, still same result, cannot install. Wireless worked perfectly with previous router (WRT54G) three days ago.
View 6 Replies View RelatedI have had my router for about a month and all the wireless lan stuff seems to be brilliant. Recently I signed up to an ISP (Plusnet), and can't access most websites. The ISP has told me that I should take this up with my Router company. I seem to be having the exact same problems as this guy was having [url]....
View 1 Replies View RelatedI have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly. New laptops, PS3, friends laptops. Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.
View 9 Replies View RelatedVery strange problem with an EA4500 running 2.0.37.131047. Set it up in no time with a Mixed network on WPA2 Personal, Internet's fine, but I can't see any of my wired clients. They don't ping at all. Even stranger, if I plug into another wired switch port with my laptop, I STILL can't ping the other clients. One is a NAS and one is a network printer so there are no firewalls involved. I power cycled the printer but in vain. I've already reset to factory defaults once, but that didn't work. I'm thinking I'll need to return it.
View 4 Replies View RelatedThere are plenty of instructions to configure USB storage but there are no instructions on how to use it, specifically. Ok, so I have my ftp address, user name and password and tried to connect with Filezilla on my local network. Unable to connect. Also, the USB device does not even show up in Network settings. However, I am able to see the device as a media server from Sony Playstation.
View 3 Replies View RelatedI recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?
View 5 Replies View RelatedI have a EA4500 that I get error 2315 when I try to Delete,change name,or icon. I did a 30/30/30 and everything worked great,24 hours later I was back to error 2315. I tried re-flashing the firmware, but that didn't work. I get the same problems when I try using the Smart Wifi app. There are also times when I can not access the router using Smart Wifi unless I reboot the router when I get home.
View 9 Replies View RelatedI just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
View 3 Replies View RelatedI want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies View RelatedI am not able to access https sites (like banking etc.). Once I plug my old router back I have no such problem. I guess it must be router settings that I cannot figure out.
View 7 Replies View RelatedRegion : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
I have a WR842ND with firmware 3.12.22 Build 120424 Rel.39632n. I can't seem to get the mail log emailed out. I've tried hotmail, gmail and ISP email ids. I know these will work as I've done it with my NAS and other routers. When I'm in the System Tools/System Logs/Mail Settings I have authentication enabled and I know I've put in the proper information including mail server outgoing mail names EG. smtp.live.com for hotmail.
I don't see any place to identify a non standard port IE. not port 25, to use. So when I try to send I get the Userid or password is wrong message. Do I have to configure something else.
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies View Relatedi cant send an email from my yahoo email.
View 1 Replies View Relatedican receive e-mail, but I cannot send it.
View 1 Replies View RelatedI can't send my email using my laptop
View 2 Replies View RelatedI just bought a new router for my home network. It is the Cisco linksys EA4500. It looks great and is rich with features but I just wish I didn't buy it!
My old wireless router started to have its wireless signal very weak, hence this new linksys router. When it is time to setup the router, I just did what was supposed to be done(which is very straight forward, just a matter of choosing pppoe and inputting a username and password) and went ahead to test the internet connection which didn't work! Upon inspection, I discovered that the lights on the internet port on the router(WAN port) didn't turn on at all as if the cable wasn't connected. I quickly checked all connections and to kill any doubt I reconnected the cable to the old router to make sure it is working and it worked. So there is nothing wrong with the cable!
I tried everything one can think of to no avail. The only conclusion one would draw from this whole scenario is that the new router is bad. So, I took it back to the shop I bought it from and before giving me another one, he said he will test it out and I said okay. Surprisingly enough, it just worked !!! Don't ask me why but it just did work beautifully, although at my house if you plug the cat6 cable(that you know for sure has internet) into its internet port, it won't even turn its lights on.
Mail in yahoo alwaysworked until recent Sunday . Now can receive email but not send in yahoo Yet a sent copy is saved in my sent box. but my recepients do not get the mail
View 1 Replies View RelatedEver since I upgraded to the netgear WNR2000v2 router, I can receive email but not send it.
View 2 Replies View RelatedIm using WCS v7.0, I want wcs to send me an email when an AP goes down. Is it possible to do it on wcs? If so, how?
View 1 Replies View RelatedServer Error: 550 emails blocked from send.
View 1 Replies View RelatedI use MS Outlook (Office 2007) to manage my e-mails. This works fine on my own wi-fi at home. However, when I am in Portugal and I connect to wi-fi in a coffee shop for example, and I load up Outlook, then I receive my e-mails fine, but I cannot send an e-mail.
View 5 Replies View RelatedI was trying to send a word document via e-mail I put the wrong information and now I cant fix it.
View 1 Replies View RelatedI have a Windows Server 2008 box. Let's call it the management server. It has two NICs. Let's say NIC1 has an IP of 10.1.1.5. NIC2 has an IP of 192.168.1.5. NIC1 can get to the internet. NIC2 is internal only and does not connect to the outside world.Now - I have a UPS on the internal network. Say 192.168.1.6. The management server and UPS are connected via a somewhat cheap but functional router. The UPS can not get directly to the internet or the 10.1.1.0 network. I would like to configure the UPS to be able to send notification emails through the exchange server that is, say, 10.1.1.10.
View 10 Replies View RelatedWhere/how do we setup an SRP527W to send email notifications? Can't seem to locate the setting when logged in as admin.
View 1 Replies View RelatedWe are upgrading from a Pix 515e to a ASA 5510 with CSC SSM. We cannot send outbound email or receive any email from the outside world. I have placed a call with Cisco Support with no luck. [code]
View 1 Replies View RelatedI have a Cisco asa 5510. I am doing attack a my firewall, using n map. I am seeing in the log the attack but i like that firewall send only alarm of attack by email . I have active email with warning and i received very much email.
I observed that graph show attack, but not ip of attacker, is possible that Cisco asa show the ip too ? The log show scanning with n map but not shunning IP and not send alarm. How i can send alarm ? The graph no show ip, it's possible show it.
On my new 942l, after 5 days of usage and tinkering with various settings, I cannot get the camera to obey the trigger=motion when configured to send snapshots over email. It does work when configured to send snapshots over email with trigger=always.Interesting enough the trigger=motion works just fine to upload snapshots to FTP. Yes, it uploads the pictures correcty on FTP detecting correctly movements, but it would not send those over email. To me it looks like a bug in the firmware that I have now a 100% repro.Are there any logs you want me to send to you for debugging?And : Is there a known workaround I can apply (reboot, resetup etc)?
Detailed description of the problem:I have setup the camera to upload snapshots to FTP AND send them over email for trigger=motion.This is what works : the snapshots are nicely uploaded on FTP , but not sent over email.Interesting : if I set trigger=always, snapshots will both be uploaded to FTP and sent over email. The moment I switch back to trigger=motion they go only to FTP and not over email.Even more interesting : the video clips work correctly with either email or FTP for trigger=motion.
What could cause this?The email (account, port, password) and FTP settings are definitely not a problem since I see pictures/videos in email or FTP with trigger=always.The motion settings are not a problem either since snapshots upload correctly on FTP when movements are detected.What it apears to be is the software is not reading or obeying correctly a certain combination of settings.I'm wondering if it has to do with the fact that for video clips the "email" and "ftp" are exclusive, but for snapshots they are allowed simultaneously. And somehow the logics get mixed up causing certain combinations of settings to now act out?
What else I tried?I tried many reboots, unplug followed by plug back in and so on.I tried saving and restoring the settings to/from a file hoping that will "reset" something.And I tried many combinations of settings, including changing the order I set and unset hoping a different code path that works will be hit.I did not try a restore to factory defaults since I installed the camera in a hard to reach place and if I restore to factory defaults i need to take it down connect it to a cable in order to redo the wifi settings.
Just installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.
View 0 Replies View Related