Linksys Wireless Router :: EA4500 - Unable To See Wired Clients
Jun 9, 2012
Very strange problem with an EA4500 running 2.0.37.131047. Set it up in no time with a Mixed network on WPA2 Personal, Internet's fine, but I can't see any of my wired clients. They don't ping at all. Even stranger, if I plug into another wired switch port with my laptop, I STILL can't ping the other clients. One is a NAS and one is a network printer so there are no firewalls involved. I power cycled the printer but in vain. I've already reset to factory defaults once, but that didn't work. I'm thinking I'll need to return it.
View 4 Replies
ADVERTISEMENT
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Feb 26, 2013
This is not a pressing issue, but if it makes sense, is there a way to just allow Wireless G and N clients only? I choose Wireless N only but I believe I have one wireless G adapter that cannot connect though I think another one does. I have not focused on this much. it won't be long before I update this 802.11g adapter to n and I won't have this problem anymore. I just did not see an option in the EA4500 for Wireless N and G if that makes sense. I wanted to block Wireless B mainly I guess.
If it all does not make sense, that is fine and you can ignore this as it is not too serious especially when I get a new wireless adapter.
View 8 Replies
View Related
Jun 28, 2012
I upgraded from a E2000 to a EA4500 today and I am experiencing slow wired WAN speeds. On my E2000 I get approximately 60Mbps down and approximately 2Mbps up, and when switching over to the EA4500, I can only manage about 20Mbps down and about 2Mbps up. I can switch back and forth between routers and replicate the results every time
View 7 Replies
View Related
Sep 4, 2012
I just now installed a new EA4500 Router. It installed itself automatically without a problem, by running the setup CD. No devices other than my hard wired computer and modem are connected yet.
When I went into Start > Cisco Connect to look around and check it's version, etc., I immediately got a "There's an important update for your router" notice. My concern is not wanting to install The Cloud at this time (although I wouldn't rule it out later). There has not been a trace of it so far.
I currently have Firmware Version: 2.0.36.126507 and Software Version: 1.4.12100.0. What this Important Update may be? Is it the "dreaded" Cloud? I'd rather avoid the whole rolling back to pre-Cloud issue for now, if possible.
View 6 Replies
View Related
Jul 3, 2012
I have a problem with my new router. I connected't my iMac (27" 2010) and NAS Synology 1511. My problem is the slow connection between mac and router - only 100Mbit (ethernet port on mac is 1Gbit), strange thing... my NAS have 1Gbit with no problem, and the mac is not. I trying manual configure - forcing speed to 1Gbit, but then is no connection at all. I'm also trying changing wires, but no change. Im buying special ethernet cable cat 6 - also no change. Changing ports on router - result the same.
View 7 Replies
View Related
May 7, 2012
Is it possible to run the EA4500 as a Wired only Gigabit router? To do this do I just go into the settings and disable both the 2.4 and 5 channels or do I have to do something else?
View 2 Replies
View Related
Oct 17, 2012
Any problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies
View Related
Oct 2, 2012
Just purchased a ea4500 router. Have setup multiple computers/devices already and works great. This computer (HP dv6000 running Win Vista home prem) however will not connect to the internet. It states that it is connected to the router (computer sees router), using the cloud connect app on my iphone i can see this computer, but will not allow access to the internet (local connection only). It works fine with the wired connection. When attempting to use the cloud connect software, it says it was unable to complete the install. Have attempted trying while connected by wire as well, same result. Have deleted the wireless connection and allowed software to find connection, still same result, cannot install. Wireless worked perfectly with previous router (WRT54G) three days ago.
View 6 Replies
View Related
Mar 14, 2013
just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
View 3 Replies
View Related
Mar 14, 2013
just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
View 1 Replies
View Related
Dec 4, 2012
I have had my router for about a month and all the wireless lan stuff seems to be brilliant. Recently I signed up to an ISP (Plusnet), and can't access most websites. The ISP has told me that I should take this up with my Router company. I seem to be having the exact same problems as this guy was having [url]....
View 1 Replies
View Related
Sep 28, 2011
I have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly. New laptops, PS3, friends laptops. Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.
View 9 Replies
View Related
Mar 6, 2013
There are plenty of instructions to configure USB storage but there are no instructions on how to use it, specifically. Ok, so I have my ftp address, user name and password and tried to connect with Filezilla on my local network. Unable to connect. Also, the USB device does not even show up in Network settings. However, I am able to see the device as a media server from Sony Playstation.
View 3 Replies
View Related
Jan 2, 2013
I recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?
View 5 Replies
View Related
Mar 6, 2013
I have a EA4500 that I get error 2315 when I try to Delete,change name,or icon. I did a 30/30/30 and everything worked great,24 hours later I was back to error 2315. I tried re-flashing the firmware, but that didn't work. I get the same problems when I try using the Smart Wifi app. There are also times when I can not access the router using Smart Wifi unless I reboot the router when I get home.
View 9 Replies
View Related
Aug 19, 2012
I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
View 3 Replies
View Related
Apr 2, 2013
I want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies
View Related
Dec 14, 2012
I am not able to access https sites (like banking etc.). Once I plug my old router back I have no such problem. I guess it must be router settings that I cannot figure out.
View 7 Replies
View Related
Sep 19, 2012
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies
View Related
Apr 21, 2011
I've looked through the documentation that came with the router and there is no instructions on how to configure the 4000 to accept remote clients and access the local network. What the configurations are so a client can launch the vpn client, login, and remote desktop to their local workstations in the office? I don't have any tunnels or connections setup with other offices, just a simple client connection.Also, will the rvs4000 work with Cisco VPN client (comes with higher end appliances)?
View 1 Replies
View Related
Jun 23, 2012
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can't access clients which are connected to router. I have added rules also in firewall.
View 1 Replies
View Related
Jan 26, 2011
I would like to put an E2000 in an office where clients are coming and going throughout the day. When the documentation says that there is a maximum of 10 guest network users allowed (with a default setting of 5) what exactly does that mean ? I don't want the first 10 guest-clients who come in, connect to the guest network, then leave the office to consume all 10 slots for the day.If I have 50 people that come and go from the office throughout the day who connect to the guest 192.168.33.X network and attempt to enter the password (but no more than 10 guests authenticated at any given time) will all 50 be successful in connecting ? Or do I have to reduce the Client Lease Time to something less than the default setting of one day ?
View 1 Replies
View Related
Jun 23, 2012
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.
View 1 Replies
View Related
May 11, 2013
I just bought a new router for my home network. It is the Cisco linksys EA4500. It looks great and is rich with features but I just wish I didn't buy it!
My old wireless router started to have its wireless signal very weak, hence this new linksys router. When it is time to setup the router, I just did what was supposed to be done(which is very straight forward, just a matter of choosing pppoe and inputting a username and password) and went ahead to test the internet connection which didn't work! Upon inspection, I discovered that the lights on the internet port on the router(WAN port) didn't turn on at all as if the cable wasn't connected. I quickly checked all connections and to kill any doubt I reconnected the cable to the old router to make sure it is working and it worked. So there is nothing wrong with the cable!
I tried everything one can think of to no avail. The only conclusion one would draw from this whole scenario is that the new router is bad. So, I took it back to the shop I bought it from and before giving me another one, he said he will test it out and I said okay. Surprisingly enough, it just worked !!! Don't ask me why but it just did work beautifully, although at my house if you plug the cat6 cable(that you know for sure has internet) into its internet port, it won't even turn its lights on.
View 19 Replies
View Related
Nov 22, 2012
I just got a new EA2700 and I notice that there is no way to get the same downloads speeds in wireless when compared to wired.Wired to my SHAW Cable modem I get 50 Mbps when I go wireless I get simply haalf of that. I spent almost 2 hours with the Linksys support on the phone and they said my router was bad.I do not buy that but it seems that something is not clear, or Linksys do a bogus advertisement saying that we can get 10x more speeds with this generation of routers or wireless technologies are just like that, cut your wired downloads speeds in half. Getting half download speeds in wireless connections versus full when wired?
View 9 Replies
View Related
Aug 6, 2010
As I continue to have various issues with my revision A version of the DIR-825, does an updated firmware is in the works? Or has revision A been DE-supported by Dlink?
I'm still having issues with: Share port printer no longer being recognized/usable until router rebootedLoss/overload of router which causes all clients (wired and wireless) to loss connectivity Router rebooting itself periodically
View 4 Replies
View Related
Jun 29, 2011
LinkSys BEFSR41 v3 4-port cable/dsl router
Ubuntu linux 11.04 'natty'
Verizon dsl internet connection
I'm unable to log into the 192.168.1.1 router using the default user/pwd of blank/admin
View 2 Replies
View Related
Mar 2, 2011
My BEFSR81 router has never been a problem for over 10 years.All of a sudden I can not connect to the internet..I only use the router for connecting 2 PCs to the internet modem. I have not changed any configuration. tried my IPS COX recommendation to disconnect the power for about 1 minute then try again with no luck. CoX said they tried pinging my router but could not get a reading. While waiting for them to come up with a solution, I hooked one of my PCs directly to the modem. It worked. So I tried it with the other PC. But it didn't work right away. It kept trying to dial up for a connection. I finally got the WIZARD to get it configured correctly. I assume it must be a router problem because either one of my PCs can get an internet connection when hooked to the modem. I did not pusue any further with COX, THEIR AUTOMATED TROUBLE SHOOTER WAS GETTING ON MY NERVES.Should I take the time to resolve the issue with the router or buy a new or refurbished router? If the task isn't too complicatged, I am willing to try and fix it.
View 1 Replies
View Related
Apr 30, 2013
I am being told from my remote end I do not have port 22 opened up. I have single port forwarding to SSH 22 and Port Range 22 enabled.
View 1 Replies
View Related
Oct 10, 2008
I am having problems with my RV042.I have a Intervoip(url...) account for VOIP.
When I try to register the intervoip account to the internet I don't get any kind of reply. My VOIP server just keeps requesting to register the SIP account, but gets no reply.
When I connect an other router to my ISP modem, the register just goes fine. However the RV042 blocks something I don't really know what the cause could be.I installed wireshark to monitor my network traffic.
When I monitor registering with intervoip with the RV042, I see requests but no replies from intervoip, the VOIP server keeps requesting, but doesn't get any reply.
When I monitor registering with intervoip with an other router, I see requests from the VOIP server, and replies from intervoip initiating my intervoip account and everything goes well and registers. The following I tried:
- Forwarding port 5060 to private ip
- Putting private ip in DMZ
- Disabled the firewall
All without result. (Also tried them all at once)
View 8 Replies
View Related
Feb 19, 2011
Unable to stop the power light from blinking on a BEFSR41 tried updating the firmware.I have tried resetting the router using the rest button, for 3 seconds, 10 seconds, and 30 seconds, nothing works.Tried running the setup disk, but it does not see the router. Is there a repair tool that I can download?
View 4 Replies
View Related
Jul 10, 2011
which is the maximum number of simultaneous wired guest clients on a 5508? And in a 2112 controller?
Wired clients count as wireless clients??
What about anchoring limitations, what is the effect of wired guest clients on the anchor controller?
View 2 Replies
View Related
