How do I view (from my desktop) what devices (iPods/iPhones) are connected to my wireless network? I have several questions re: control over my network, but I think this question is the first thing I need to know.
View 1 Replies
I upgraded to v1.0.0.4 because on v1.0.0.1 all of a sudden my router's internet connection to my wifi devices was 'becoming stale' and I would lose internet connectivity even though i was still connected to the router. The only way to get my router to get the browser to load pages again was to go to Status and release then renew dhcp.
After upgrading, it does it less often. The problem now is that when my devices detect the network, they are all forced to re-enter the password. Well, all iOS devices. My macbook air doesnt require me to re-enter the password but it does not automatically connect to the network even though it is set up to do so and does so with 3 other networks from offices and other houses.
In other words, my only problem is with my wrt54g2 at home. My iOS devices must be told everytime to connect to that network (they wont connect automatically) and the password must be re-entered everytime. This only happens with this router. And my macbook air has to be told to reconnect to this network although it DOES save the password for it.
What could be the problem? I already changed the patch cable from my modem to my router. That didnt do much.
I purchased this router a few months ago(wrt54g2 v1.0) when I moved into st louis missouri. My ISP is charter communications. I am using windows 7 64 bit.I had no problems with this router with wired connections, however my wireless devices would drop repeatedly. I updated the firmware to the latest linksys version, but still same issue.After much research online and trying everything I could through linksys, I found a page that someone with the same problem said it could be solved by upgrading to dd-wrt freeware firmware. After much trials and problems, I finally got it installed. However I did not like dd-wrt because it would not allow FTP access no matter what i tried, and would lead to dropouts of wired connetions even though it did fix the wireless.I then decided to revert back to the previous firmware - this is where i think i messed up..I downloaded tftp and a firmware called vxworkskiller, this was supposed to be able to break the dd-wrt firmware which it did, and removed it. I continued to follow the instructions provied to me and was able to then install the linksys firmware but I accidentally upgraded the firmware for the router WRT54GS with the firmware version 7.50.2. This is now dropping both wired and wireless connections VERY frequently. My roomate is not happy as we have to power cycle the modem, router and pc's every couple of hours and sometimes that doesn't even work.I am unable to flash firmware of any version or type anymore, every upgrade fails weither I use the linksys gui, or tftp or any previously working firmware. All fail.
View 5 Replies View RelatedMy PC will connect just fine, but it is the only device on my network that the router will allow internet access. The router will allow other devices (DVR, laptop, nook) to connect to it, but won't allow those devices to connect to the internet. Each device will show the same error, - "connected to linksys - no internet". I've reset the router many times with no results.
View 1 Replies View RelatedI have a Linksys WRT54G2 wireless router set up on my home network. When I first got the router, I used the installation disk on my desktop PC to set up my wireless network. I am getting rid of this computer, as I now have a laptop computer. The laptop can already utilize the network, and I can even configure the router using the laptop. Obviously, the old desktop doesn't even have to be turned on for any other laptops or devices to use the network.
If I get rid of the old desktop, will it be necessary to run the installation disk that came with the router on my new primary PC? Or is that a one time process to configure the router with the modem and set up a network?
I'm fairly new to setting up hardware. I have WRT54G2 router and drops internet connection with ATT DSL. When I go to repair the connection, the wireless connection disappears and I have to reboot the computer several times to get the connection to reappear. [code]
View 2 Replies View RelatedHad a secure network with my model wrt54g2 v1 router, then suddenly it's not showing up. All I have is a unsecured Linksys way on to the Internet. How can I get this back to my secure network?
View 7 Replies View RelatedSo I am on my second HDD with Iomega. I am thinking now that this is a router problem rather than a HDD problem. I have a 1TB Iomega home media network drive, eversince I bought my router and began using it I have been unable to use my HDD. It is hard wired to the router via RJ-45 cable and both units have been reset and powered up in about every order you can imagine. I have reset factory defaults on the router and made security changes to ensure there was nothing blocking that port. I am at wits end. I cannot connect to the HDD and the drive flashes yellow and blue indicating it cannot estabilsh or receive an IP address from the router.
View 6 Replies View RelatedWhy is my network magic software registering over 32 gigabites of memory being used?
View 1 Replies View RelatedI have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies View RelatedI have a Linksys E1200 router.My problem is I have installed a camera system that allows remote viewing.I cannot access the system through the E1200 I am not very knowledgeable in net working.What do I need to do to access the DVR from a remote computer?
View 1 Replies View Relatedsetting up ea2700 to enable remote DVR viewing?I have tried port forwarding and enabling remote management. But I can only access locally.
View 9 Replies View RelatedI have cable @ 15Mbps down, 2Mbps up. The cable line comes into the crawl space in my daylight basement. I have 3 Cat-5 cables running through the house. 1 to the TV downstairs, and then 1 each to 2 bedrooms on the second floor (one of which is my home office). In the home office, this Cat-5 is connected to a 24-port switch. I plug my printer, NAS, computers, etc into this switch.I have a WRT54G2 v1 that I was using as my Router/AP.I have a 1st & 3rd generation iPad. The iPad 3 plays YouTube videos in HD. About 6 weeks ago I started to get slow YouTube video playback on my iPad's. They would play a few seconds, then pause to buffer, etc. It used to be that videos started playing almost immediately and would never buffer.
Using Wifi Analyzer for Android, I noticed my neighborhood is saturated with 2.4Ghz wifi. So, I figured it must be that the 2.4Ghz band is saturdated and if I moved to a 5Ghz band, the YouTube buffering would be fixed.So, I purchased an E4200 (v1 I think) from Amazon. I bought this Router/AP because it supported the 5Ghz band. It also I connected it to my cable modem and setup everything. Still slow YouTube, and now YouTube videos are slow on my laptop (connected via ethernet). I still get ~15Mbps over ethernet or wifi using the speed test page provided by my ISP, but YouTube videos are VERY slow.
I have noticed from time to time I get many (15-20) "network devices" in the Device List with no MAC address. I notice this mainly when managing Parental Controls. I go and clean up the Device List and days later they reappear. Another interesting thing is that the computer I am writing this with (through the router) does not show up in the Device List and I have an IP address from the router. I have the latest firmware 1.1.28.146856. Does anyone else see this on their EA6500?
View 2 Replies View Related I have 3 computers in total: 2 desktops and 1 laptop.
1. My primary PC is connected physically to my router.
2. My (downstairs) laptop is connected to the wireless.
3. My other PC connects to the wireless network via USB wireless adapter.
I was having issues getting #3 connected to the wireless network. I used the Wi-Fi Protected Setup™ PIN number provided to me by the Linksys Wireless Manager to no avail. The E3000 router and #3 could never find each other.After calling support, it turns out that more often than not, "other" wirless management software (in my case Linksys Wireless Manager that came with the USB device) was interfering with my Windows XP Wireless Manager.Rule of thumb: Always let your native operating system manage the wirless networks that are available to it. It does a far better job and is 10x more reliable than software provided by 3rd party vendors.Specific to my case: Windows XP, I had to enable the Windows Wireless Manager and uninstall the Linksys Wireless Manager Software. Here it is...Enabling Windows Wireless Manager These directions are for Windows XP:
1) From the Windows Start menu, click Control Panel.
2) Click Network and Internet Connections.
3) Click Network Connections.
4) Right-click the icon for your "wireless network connection", then click Properties.
5) At the top of the window, click the Wireless Networks tab.
If the "Wireless Networks" tab does not appear between the "General" and "Advanced" tabs, you are not on/in the wireless network connection settings:a) click cancelb) Right-click the icon for your wireless connection and choose "Enable". c) return to step 4 6) Check the checkbox next to "Use Windows to configure my wireless network settings".
These directions are for Windows Vista:
1) Go to the Windows start menu and then the control panel.
2) Open Network and Sharing Center.
3) Click Manage Network Connections (from the left side menu).
4) Right click on the network adapter 'Wireless Network Connection' and choose "Properties" and click "Continue".
5) At the top of the window, click the "Wireless Networks" tab.
If the "Wireless Networks" tab does not appear between the "General" and "Advanced" tabs: a) click cancel b) Right-click the icon for your wireless connection and choose "Enable". c) Return to step 4
6) Check the checkbox next to "Use Windows to configure my wireless network settings".
I was requested to connect 2 WRT54G devices in our network with same ip range.
View 2 Replies View RelatedThe network is constantly disconnecting from my devices and wont let me reconnect...I reset the network completely back to factory settings and started from there. Some of my devices didnt want to connect at all after the complete reset.These are the settings that I have changed: SSID has been changed,wifi security(wpa2 personal,AES) ,channel(width=20, channel=auto) ,DNS server(changed to Norton DNS: 198.153.192.40 & 198.153.194.40) & router management logon password & firmware upgrade to 3.0.03...
Router:Linksys WRT160N V1
Firmware:3.0.03
I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies View RelatedFor a while now, my wireless network at home has been very unreliable. I posted on these forums before, asking for assistance to fix crashes that seemed to be random. I was largely unsuccessful, and the problem continued. However, as I continued to experiment with different methods to keep my network up and running, I noticed that as long as I had at least one device connected to the network around-the-clock it never crashed. This was easy enough, as I own an iPod touch and a dock (I would leave it sitting it the dock unlocked all the time). But it's annoying to never be able to leave the house with it, and I'm ready to finally get a solution to the problem once and for all. I would prefer not getting a new router, but if worse comes to worse I will.
To sum it up:
-Works perfectly (when up) at full speed, never crashes unless there are no devices connected to it.
-When it does crash, it is very difficult to 'coax' it back into working again; it's been down for weeks at a time before.
-For some strange reason (and maybe this is a clue), newer game systems such as a Nintendo DSi or PS3 can make it start working again. I, of course, own neither of these.
-I'm using a WRT160N V3, latest firmware as far as i know.
I cant see in my network the devices connected to SE2500 just the SE2500 itself. The internet access of the devices connected to SE2500 is working correctly. Is this a problem?
View 3 Replies View RelatedWe purchased an EA6500 to take the place of the router function of a Verizon Westell 7500. We bridged the Westell, installed and set up the EA6500 and everything seems fine.
What is strange is that some devices on the network (our server, user PC, a NAS that isn't part of the domain) while accessible if you navigate to them via \ do not appear in the Network window.
This of course is causing issues for some users who don't or won't map network drives.
At first I thought this may be an issue related to us having some of our network devices with static IP addresses so we switched them over to dynamic - no change in the network window.
we will have to return this router and get a different brand/model if it won't work in this fashion.
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies View RelatedWhere can I find a log or list of devices that attempted to access my EA4500 wireless network?I am using the cloud services to monitor my EA4500 usage in an apartment environment.
View 1 Replies View RelatedI have a Linksys WRT54G2 V1and I am trying to hook it up to my broadband modem after hooking up the connections it still does not recognize?
View 2 Replies View RelatedYesterday my wireless internet suddenly stopped working. I plugged the ethernet cable directly from the modem to the computer and everything was fine, so I reset the router, reconnected it to the modem, and went to the setup page 192.168.1.1. I reconfigured the router on the setup page, leaving all previous settings the same (except I renamed the network from linksys to our own name and reconfirmed the WPA Personal password). My computer can connect to the wireless network but I can't go online.
View 9 Replies View RelatedReally not grab Router Gateway, even as did the 30-30-30 reset because I had all the lights on, and is still in trouble. I am currently connected via ethernet to the router only. And yet not grab us Links Home door. The lights now are Power, WIFI and Port 4.
View 2 Replies View RelatedI have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.
View 3 Replies View RelatedI have a WRT54G2 v1 (no new firmware available) with a cable-modem connection (Motorola Surfboard), every thing works perfect but when my ISP goes down and then back up I cannot get the router work, LAN or Wifi connection. I have ping response to the router and I'm also able to get into the admin page. The only way to recover is restarting the router and sometimes releasing DHCP and then Renewing it, and the Wan connection actually gets the same IP it had before.
View 3 Replies View RelatedI'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .
View 1 Replies View RelatedWent away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration. It's showing a WiFi signal, but is no longer password protected.
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting. I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login. I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct? But that's not getting me in either.
I'd like to get this network password protected again and not offer a signal to all of my neighbors.
I've tried to connect my father's laptop and my father's girlfriend's daughter's PC to my Linksys Wireless Router, model #WRT54G2 V1. So far, I have steady and fast internet access on my PC which so far I've only gotten my father's laptop to connect through. However, I can't figure out how to get her PC to get internet access through my router. I'm mediocre at configuring computers, and I'm absolutely terrible at routers. :/ There was the possibility that her computer isn't new or advanced enough or whatever to be compatible with a wireless router, but at the same time she has a Wireless Network Setup Wizard app. in the control panel area, so wouldn't I be correct in assuming that if a computer has a wizard dedicated to it, it is compatible? I've run Wireless Network Setup Wizard as well as just plain Network Setup Wizard, and I've had them both read that it was successful connecting to my Router's network...but where do I go from there? I've never had to mess with a PC before so I'm not entirely sure. She has a modem, which can not be plugged into the phone jack at the same time as my modem otherwise we both do not have internet access, however if one of us plugs in that person is fine, so that's when I figured I'd try to get her PC into my network with my dad's laptop. Also, we have a Broadband connection setup through Verizon, if that matters at all. Does she need a modem to hook up to my network at all? If so, does that modem need to be plugged into the phone jack? If required I'll give her OS and PC specs and such, but from what I know just being on her computer she runs Windows XP as an OS and her computer is an "eMachine".
View 9 Replies View RelatedI have been having trouble with my wireless router for the past month and not sure what is up with it. I have recently moved and got it working for a day then the wireless did not work and i was not able to access the setup webpage either. What I ended up doing was upgrade the firmware to the newest one and it worked well for about 2 weeks but then started again and the only way it works is to reboot the router but then the next day it will not work.
View 3 Replies View RelatedI installed a Linksys WRT54G2 router earlier this year and set my Siemens modem from AT&T(Actually from SBC before the two merged) in bridge mode. I did this so I could change the NAT setting on our internet, which was interfering with my Xbox. It worked for about 4 or 5 months with little to no problems. Recently, however, the internet has been disconnecting and when I check the status page on the router it says it is disconnected. Sometimes clicking on the connect button will work, but usually it will say "Connecting" and keep refreshing the page for a little while without any change, then give me a message saying it couldn't get the IP from the PPPoe server. Turning it and the Siemens modem on and off and fiddling around seems to solve the problem, but only temporarily. Interestingly enough, I don't think it ever interferes with my Xbox. Until recently, the Xbox was set as the highest priority on the QoS page, but I changed the computer to the highest priority and it hasn't worked. In addition, the small, thin green light bar just below the Linksys logo on the top of the router has just recently started changing to orange occasionally
View 9 Replies View Related
