I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies View RelatedI'm fairly new to setting up hardware. I have WRT54G2 router and drops internet connection with ATT DSL. When I go to repair the connection, the wireless connection disappears and I have to reboot the computer several times to get the connection to reappear. [code]
View 2 Replies View RelatedMy computers will not connect through to the internet. It's not the modem, because if I connect my desktop directly to the modem, it connects fine (which is how I'm typing this now), but if I plug in the router, my desktop and my laptop (wireless) will show they're connected to the network, but that there is no internet connection available. Support won't troubleshoot because I've had my router 1 year and 10 days (which I think is a crock of **bleep**) and the "Guide Me" thing is just running me around in circles. I'm so pissed off I'm about to throw the router through a window and buy another (*NON*-Linksys) router, rather than pay $30 for one time tech support (which, with my luck, the same thing would happen again in 3 months, and the same directions wouldn't work then). I've done a factory reset, and set up the router from scratch, done a firmware upgrade, everything, but it still won't connect
View 1 Replies View RelatedLose internet connection at least once a day. Each time regaining by unplugging power cord for approx. 10-12 seconds. Is this a router failure and maybe needs replacing or ?
View 2 Replies View RelatedI moved to a new apartment about a month ago and have been having problems with my internet ever since. I use a wireless router (Linksys WRT54G2) and especially have been having issues whenever I try to go on the internet on 2 computers (only have 2 in the house). My internet icon will show a strong signal, but it will say "Local Only" and won't actually connect to the internet. I will also occasionally get a message that there's an IP address conflict with another device.
I wasn't having any problems at my old apartment using the same setup, so when I first moved in I thought it had something to do with my new ISP. But they came out and claimed that there were no issues with their service. So I browsed various websites and forums including this one, and tried many of the suggestions. Some of them worked temporarily, but the problem kept reoccuring. From reading some of the other threads, it seems like it may be a problem with Windows Vista, the OS on the main laptop that I use (the other one was a Lenovo with XP, but I just replaced it with a Mac and am still having the same problem).
I'm using a refurbished WRT54G2 v1.5 router. I've had the router for two and a half years and have never had a problem. I recently unplugged my DSL modem and this router to move them, and when I plugged them in again, the router stopped picking up the internet signal from the DSL modem. I'm able to get internet when I hardwire directly to the modem though. I tried resetting the router and setting the router up from scratch again, but now I just get error 321 Ethernet cable not connected when I try and run the setup cd.
View 6 Replies View RelatedI'm having problem with the router WRT54G2, My laptop - winodws 7- connetcs to the wireless.Then it asks me if I wanna configure the router I saw yes, I give a name to the wireless connection and a password, everything works and come to the end, after that I connect to my wireless connection and a little yellow triangle appears -down right on the signal bar. I resetted the router already and update the firmware.Still won't work. I thought maybe I need to put a static IP but I won't find the DSN Code.
View 1 Replies View RelatedI am trying to install my router but I keep getting the error message that my ethernet cables are not connected. I have tried several times and everytime I know that the cables are in correctly. Is there anyway to solve this problem?
I am running in XP and my router is WRT54G2.
I have some issue with internet connection and Router WRT54G. There is always "Local Connection" but no internet access. I checked that at two different laptops. One with Windows Vista and the other one with Windows XP. Both the same problem. There is a wireless connection with excellent signal strength but no internet access. I added a screen shut to see the Router setting. If more needed I will add more.
View 6 Replies View RelatedI usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
View 14 Replies View RelatedI have a WRT54G2 v1 (no new firmware available) with a cable-modem connection (Motorola Surfboard), every thing works perfect but when my ISP goes down and then back up I cannot get the router work, LAN or Wifi connection. I have ping response to the router and I'm also able to get into the admin page. The only way to recover is restarting the router and sometimes releasing DHCP and then Renewing it, and the Wan connection actually gets the same IP it had before.
View 3 Replies View RelatedI have experienced some strange behavior of WiFi connection using WRT320N router. ISP provides me the internet in 2 modes (day and night). During day mode max speed is 24 Mb/s and during night 60 MB/s. Modem ADSL (Cisco EPC3010) is connected to Linksys WRT320N and on router is configured WiFi.Now issue. In the day mode everything is perfect. Cable connection gives me 24 MB/s and WiFi connection around 22 MB/s so not so bad. However when my internet speeds up to 60 Mb/s (cable connection via router gives exactly 60), WiFi connection instead speed up as well, just drop to max 17 Mb/s. I have tied several different settings on the router including changes in WiFi band, channel width, different channels (now channel is setup to 1 which is maybe not totally free but no so occupied) and others but unfortunately without significant improvement (in many cases connection just slowed down more).
And some details:
Wireless configuration (now)
Band: 2.4GHz
Mode: Wireless-N only
Channel Width: Auto (20MHz or 40 MHz)
Channel: 1
Wireless adaptor: Intel Centrino Advanced-N 6230 (I know that this doesn’t mean anything but Win7 shows that connection is established with speed 144MB/s)Router firmware and WiFi card updated to the newest version.
I bought a Linksys router last summer for my PC and Xbox. The PC and XBox are hardwired into the router. About two weeks ago, my router began dropping connection throughout the day. Sometimes it happens 3+ times in an hour. Other times it works for several hours before it drops.I upgraded the firmware as one fix and did a hard reset of the router. Still drops connection.I changed the MTU to 1400 and it worked fine for several hours but then dropped again the next morning. Also, like others on the forums, when I changed the MTU and hit Save Changes, it just ran and ran, never timed out...but never showed that it finished the command to save (if you get my meaning).I downloaded the Cisco Wireless Magic program to troubleshoot. It tells the same thing everytime. Unplug your router for 10 seconds and start over...My PC sometimes flashes a warning when I am restarting the router that I am getting Limited or NO Connectivity.
View 7 Replies View RelatedMy router has been dropping the internet connection for years. The ethernet connection to the desktop works fine all the time. The problem is only with the wireless connection. About every 1/2 hour or so the router will drop the wireless connection and neither or my 2 laptops can find the network. Unplugging the router and replugging it in solves the problem temporarily, until it drops it again. I updated the firmware to 1.0.4 and that yielded no changes.
Router: WRT54G2 v.1 Modem: Siemens Speedster 4100 (part #060-D141-A12) My two laptops running wirelessly are Macs. The desktop is PC running Windows Vista.
I have to unplug/replug my router powercord connection every time i want to use my laptop to access the internet. i have reinstalled the software disc that came with my router. i have have comcast check my modem-
View 2 Replies View RelatedI have an WRT54G2, and I recently bought an new notebook and a new mobile phone. The question is none can connect to my wireless network.My linksys had the following configuration:
Firmware 1.0.03
SSID hidden
WPA2 personal + AES
My note is an ACER 5552-5664 running Ubuntu 11.04 and Windows 7, in Ubuntu I can’t use the wireless. In Windows it works fine.The phone is a Samsung Galaxy and do no connect in the wireless.I had an old notebook running only Windows 7 that works fine too.In my father’s home there is an WRT54G and all my equipment connected there. Other problem is that when I tried to update the firmware, it simple don’t update. I’ve downloaded the last firmware file from Cisco’s page.
My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.
I have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.
View 3 Replies View RelatedI'm trying to connect an Epson Stylus Color 740 USB printer to a newly purchased E4200 wireless router. I've upgraded to the latest Cisco Connect software and to version 1.0.0.3 router firmware. I get the message "A non-supported device is connected to your router's USB port. Disconnect that device and follow the steps below to connect a USB printer to your router." Cisco support was not beneficial.
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
I have a Linksys WRT54G2 wireless router set up on my home network. When I first got the router, I used the installation disk on my desktop PC to set up my wireless network. I am getting rid of this computer, as I now have a laptop computer. The laptop can already utilize the network, and I can even configure the router using the laptop. Obviously, the old desktop doesn't even have to be turned on for any other laptops or devices to use the network.
If I get rid of the old desktop, will it be necessary to run the installation disk that came with the router on my new primary PC? Or is that a one time process to configure the router with the modem and set up a network?
When I connect the ethernet directly to my mac the internet works fine, but when I try to connect through my Linksys WRT54G2 V1 Wireless-G Broadband Router I can't connect to the internet. Omitting a few minor problems, my router has been working fine for the past year and a half. Recently it started giving me trouble so i have started trying a number of things to fix it, but I'm no expert in this category. The other day i tried updating the firmware which actually worked for a couple of hours, but then stopped working again.
View 3 Replies View RelatedBeen trying to connect to the internet through the modem with ethernet cabe and it repeatedly does not connect. I've set up teh router with the linksys setup program and still nothing.
View 1 Replies View Relatedrecently my internet got disconnected, they reconnected my internet configured my modem when i tried to connect my router ,it would connect to my comp but it said there was no internet. I reset it to factory settings via ip address and then threw the button on the router when i installed software it keeps saying that the router cannot recognize the internet and i should contact my internet provider, but my internet is working when i connect it to the comp directly?
View 4 Replies View RelatedI have a WRT54G2 router and when I try to connect to the internet, both wired and wirelessly, my network icon gives me a "No Internet Access" yellow sign icon. I have successfully connected to the internet by directly connecting to the modem and I have connected to other wireless networks using this computer so I have pretty much narrowed the problem down to the router. I have already perform a firmware upgrade to the latest version and did a hard reset of the router and setting it back up, to no avail. One problem I ran into while I was setting up though was that I can't even set it up with the WiFi-protected setup so I had to set up the password and stuff manually, as I have always done successfully in the past. I've never had a problem with this router in the past and so I think this router may be due for a replacement. I have contacted support through live chat and all the options they're giving me is either pay $25 to talk to someone about this or go through troubleshoot section.
View 2 Replies View RelatedI have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet.
View 3 Replies View RelatedMy router EA4500's Cisco Logo is Blinking and not connect with any device
View 5 Replies View RelatedI have several devices connected to my Linksys EA4500. Two of them are my Apple Mac Pro and my Logitech Squeezebox Radio. For some reason, in 'Device List', my Apple Mac Pro has the manufacturer 'Logitech' and the model 'Squeezebox Radio'. As for my Logitech Squeezebox Radio, it doesn't have a manufacturer nor a model. It appears that there is a mix up with these two devices. I have cross checked the IP addresses and MAC addresses displayed in Cisco Connect Cloud with those displayed on the devices and they match - so it's not a case of mixed up names. Could this be an issue with Cisco Connect Cloud?
View 1 Replies View Relatedjust got a new router/modem and found the network but can only get local connection no internet. Im running vista?
View 2 Replies View RelatedHow do I view (from my desktop) what devices (iPods/iPhones) are connected to my wireless network? I have several questions re: control over my network, but I think this question is the first thing I need to know.
View 1 Replies View RelatedHad a secure network with my model wrt54g2 v1 router, then suddenly it's not showing up. All I have is a unsecured Linksys way on to the Internet. How can I get this back to my secure network?
View 7 Replies View RelatedI can connect to skype but i can't browse anything in the internet. I'm using a CISCO WRT54G2 wireless broadband router.I cannot ping also but im online in skype or chatting application.
View 5 Replies View Related
