Linksys Wireless Router :: WRT610N Network Connected - No Internet Access
Jul 8, 2011
My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.
View 1 Replies
ADVERTISEMENT
Dec 25, 2012
I just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.
View 3 Replies
View Related
Dec 2, 2011
I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
View 4 Replies
View Related
Jan 9, 2011
The Internet Access Policy feature of my WRT610N router doesn't appear to work, at all, zip, nothing, nada. I have setup the feature todeny access to one of my laptops for everyday 24 hours a day, but it can still use the net...
View 5 Replies
View Related
Jul 16, 2012
I have a WMP110v2 card installed in my desktop. It can connect to my wireless network, but it cannot access the internet. Other computers on the network can connect to the internet (wired and wireless), so I know it's not a problem with my modem/router. I have tried reinstalling the device several times, but nothing seems to work. It receives a valid IP address, but when I try to ping my router, all packets are lost.I'm completely lost on what to do next.
System specs of the PC in question:
Dell Dimension 3100Windows XP Media Center Edition, SP3
Intel Pentium 4 CPU @ 2.99GHz
1GB RAM
View 1 Replies
View Related
Feb 3, 2013
Linksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
View 3 Replies
View Related
Jun 21, 2011
Linksys Wireless router connected but no access to the internet?
View 19 Replies
View Related
Oct 22, 2011
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
View 1 Replies
View Related
Apr 10, 2012
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies
View Related
Aug 5, 2011
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies
View Related
Nov 5, 2011
I've looked through the forums and FAQs and haven't seen anything that resolves my issue. I recently moved from the US to Japan. I had my WRT54GS set up in the States and the network worked fine. When i got here, i set it up, hard reset the router and set up a new network.
I can access the internet when connected through the router via ethernet cable, but I cannot connect any of my wireless devices. Easy Link Advisor says "internet connection is not working" but it is. I have two computers connected via cable and they both work so it is not an issue of my ISP allowing multiple IP addresses.
My wireless devices (XBox, PS3, laptop) can see the network but cannot connect through to the internet. I also just noticed that the "wireless mode" according to the EasyLink Advisor says "disable", however the wireless settings on my 192. server webpage is set to "mixed" and seems to be correct in all settings to be on.
View 9 Replies
View Related
Apr 15, 2012
What do I have to do to be able to access the USB drive I plugged into my WRT610N from anywhere, on any computer?
Currently, I just plugged it in, went to \WRT610N in windows explorer, and mapped it as a network drive, adding a few files to try out.
So what do I need to do now to access it from any computer that has internet?
View 1 Replies
View Related
Jul 26, 2012
I have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsJim>ipconfig /all
[Code].....
View 19 Replies
View Related
Jun 22, 2012
I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?
View 5 Replies
View Related
Mar 4, 2012
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
View 1 Replies
View Related
Nov 26, 2011
I have the following network configuration. Linksys E4200 is a main router which connects directly to internet. I have also a couple of WET610 bridges. One of them sends internet through WAP610 (linksys access point - works fine). Another one is still free, so I would like to share internet from the second WET610 through my WRT610n router. I tried to use the same setting as people recommended for direct cable connection of two routers (WRT610n WAN -> main router's LAN; DHCP and NAT on WRT610 turned off, WRT610's IP differs from the main router's IP), but it doesn't work in my case (WRT610n WAN -> WET610 -> wireless -> E4200). Unfortunately WRT610 doesn't see DHCP (so no one of clients receives proper IP, I can't reach my network if I connect to WRT610, I can't reach WRT610 from my network).
View 3 Replies
View Related
Sep 14, 2011
I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference. When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set time but it appears it is not so. What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?
View 4 Replies
View Related
Mar 11, 2012
I entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);
Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.
View 1 Replies
View Related
Feb 22, 2012
I'm unable to access the web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'. However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.
View 3 Replies
View Related
Jan 14, 2011
Have an Actiontec GT704 feeding DSL into a BEFSR41 which is connected to a WRT610N. Can access internet, modem and wired router from desktop. Can access wireless router from laptop. Cannot access internet from laptop or wireless router from desktop. Changed ip address for wireless router to 192.168.2.1 so no conflict with modem or wired router.
View 3 Replies
View Related
Jun 22, 2010
I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N?
View 5 Replies
View Related
Aug 23, 2011
I cannot access the WRT610n setup/management pages wirelessly from my Macbook using safari. I can access the router via wireless from iPhone and PC and I can access it from the Macbook via ethernet cable.
When I try to access the router from the Macbook I just get "Contacting..." in the Safari status line and eventually it times out.
I can access the internet using Safari via WRT610n wireless. The only page I can't access is the router's management page.
View 7 Replies
View Related
Nov 18, 2011
I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".
View 5 Replies
View Related
Jun 24, 2012
I have had my WRT610N for several years and I noticed the other day that my network was not locked. I went to task/change wireless connection and clicked on it. The next screen gives me two options: " Wireless Security" or "Network Lock" and under network lock it states "Network Lock: Not enabled". I then click on the enable network lock button and I get the following message "network lock could not be enable." No matter howmany times I do this I get the same message. So, why is Network Majic not letting me lock my network? It has always worked before and just recently did this. I have done a factory reset on my router to see if this could be the problem, but i still get the same message.
View 1 Replies
View Related
Mar 11, 2009
On my network I have a wired PC running Vista Ultimate, a wireless g notebook running XP Pro, a wired PABT box for VOIP, an iPhone, a wireless g Mediagate MG350HD media extender connected to the TV in the lounge (about 10 metres away through 3 wooden walls) and I have a usb hard drive connected to the WRT610N router.I have only switched on the 2.4 band on the router - 5.0 band requires the client to have wireless N anyway, so since I have no wireless N devices it's no use right now?To manage my network I use Network Magic.
Problem #1. My Mediagate MG350HD keeps dropping it's connection to the network. I have tried using DHCP and a static ip for it but it still drops. The only solution I've found is toremove the blanked-out Mediagate from the network map in Network Magic, reboot the router, click 'search for new devices' in Network Magic and MOST times it will redetect and reconnect the Mediagate.
Problem #2. Trying to configure the network storage device (my USB hardrive) is a pain in the arse.In the routers storage tab I cannot make sense of the folder creation. All I want to do is share specific folders and all their contents on the network. Every time I go to assign access rights and click the groups over into the access granted column and hit 'save' it puts them straight back in the access denied column. Does this have something to with permissions on my PC? When I go into Network and Sharing Centre it now displays 'Network Storage', when I click into it 3 networked folders appear, when I try to set permissions on these folders I hit apply and the boxes I've just ticked blank-out again. The folder marked 'Network Hard Drive' (the one I set-up using the storage tab in the router) does not display the subfolders and the actual movies stored on them. When I try to change the persmissions on the using my PC, different folders, eg Movies, TV etc... I get the same blanking out of the tickboxes on 'apply'.Is there a step-by step graphical instruction I can follow other than the PDF that came on the disk with the router.
View 9 Replies
View Related
Jan 9, 2012
WRT610N router with v2 firmware stopped working correctly. It loses wired connection via LAN ports.My home network has one PC connected to LAN port 1 and two PC connected via Wi-Fi.Recently unexpectedly the PC with wired connection lost connection.
The symptoms are the following:
- The DHCP local network address is obtained not every time.
- The router (192.168.1.1) not usually responds to ping (returns "host is unreacheable) and I even unable to connect to router's web interface.
- The led for the 3rd LAN port on the front face of router is always on while nothing was ever connected to this port.
- Wi-Fi clients (Windows XP) obtain DHCP address for 30 seconds then report that connection is limited and in a few seconds report that everything is
- The internet for both type of clients is almost not accessible (Wi-Fi is better)
Sometimes (but very rarely the wired connection works fine.
I suppose in my case this is a hardware problem. Can this be repaired of fixed somehow?
View 9 Replies
View Related
Jun 29, 2011
I have Wrt610n V1 Firmware V 1.00.03 B15 and internet 300 mb.If i connect PC to my internet bridge i have 300 mb. But when I switch between a WRT610n all ports have ~100mb. In router I removes all check marks from all security, filter.
View 6 Replies
View Related
Apr 23, 2012
I am trying to access the internet trough my WRT610N connected to a ZyXEL P-2601HN provided by my ISP.
I have the WRT610 all setup and working, but I cannot connect to the internet. The WRT610N is a the latest firmware version.
The WRT610 is connected (Internet) by cable to the Zyxel (one of the four ports)with a cat.5E patch cable.
the wireless is so much better on the WRT610N than the ZyXel.
View 3 Replies
View Related
Sep 23, 2011
I am trying to configurate a WRT610N router that is connected to an ADSL modem.
I set this as DHCP, but in the status page I am only getting the Internet Address of 127.0.0.1.
The ADSL modem IP is 192.168.1.1, but I cannot have access to the modem configuration,
View 1 Replies
View Related
Sep 15, 2009
We'r using Linksys CISCO WRT610N and WRT310N wireless router.Our requirment using web access restriction is that we've to Block some website and the corresponding setting is going to be applicable to all users who are accessing internet through this router. The people who are accessing internet through corresponding router should not be able to access web site which are restricted in Router setting. There is the Setting with name "Web Access Control etc etc ".
View 9 Replies
View Related
Jan 3, 2012
I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies
View Related
Dec 29, 2011
I am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies
View Related
Feb 27, 2013
I have a WRT610N v2 with current firmware. The hard drive is a Western Digital Elements formatted to NTFS and already has music and photos so that other computers in the house can view them. This setup was done awhile back, maybe even a year ago.
Anyway, I can map the network drive and see everything there, but then after awhile (minutes - maybe 10) of idle time, the network drive can't be accessed by any computer, either as the mapped drive (W or by clicking the WRT610N in the network tree. It's like it goes to sleep and can't be awakened by activity.
I have searched the forums here and at WD but haven't found a solution or even this exact problem. I did find a utility on the WD site that is supposed to fix/eliminate the short idle time, but it didn't seem to work.
View 4 Replies
View Related