Linksys Wireless Router :: E1200 Computer Says That Its Connected But Have No Internet Access
Jun 22, 2012
I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?
View 5 Replies
ADVERTISEMENT
Mar 28, 2013
I have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful.
View 9 Replies
View Related
Jan 21, 2013
Anyways when i connect the ethernet cable from the modem directly to my pc it works fine.
When I try to use my router i get the yellow exclamation mark on the bars and it says no internet access. I thought it may just be my computer but my smart phone will not connect either.
The modem is a motorola sb6121 The router is Linkseys E1200 I have tried unplugging everything as well as reseting the router several times
View 4 Replies
View Related
Jul 18, 2012
The HD connected to my X3000 Router is recognized and visible (shared folder) from my media player connected to my TV. However I can't see it from my computer to add/remove files. Isn't it possible to administer the files on the drive without disconnecting it from the router and connecting it to the computer?
View 2 Replies
View Related
Sep 5, 2012
I have E1200 router and a Motorola cable modem. I can access the router and internet with a wired connection but when I unplug the ethernet cable I no longer have internet access. I can connect to the router. I have another computer and xbox that are running wireless with full internet access.no problem.
View 3 Replies
View Related
Sep 10, 2011
Okay so my friend recently bought a Linksys E1200 Wireless-N Router. We set it up the other day and it all appears to be functioning just fine. The only problem is when we log into her wifi it says "No Internet Access". I'm moderately okay when it comes to computers but not expert and I'm horrible at the whole wifi router thing. Through my laptop I've done a Windows Network Diagnostic to see what was wrong and it says that my "computer is correctly configured but the device or resource (DNS server) is not responding."
View 8 Replies
View Related
Sep 12, 2012
I just bought a factory refurbished E1200. The label on the bottom says it is a Version 2 model. When I purchased it, it was loaded with 2.0.02 firmware but I upgraded the firmware to 2.0.04.My problem is that I'm trying to setup MAC address-based restrictions thru the manual/web-based setup and when I click on the "Access Restrictions" tab, I only have simple "Parental Controls" and not the advanced "Internet Access Policy".Is it possible that I have a mislabeled V1 device? If that is the case, how is it that I was able to upgrade the firmware using firmware from the V2 downloads section.
Do V! and V2 units use the same firmware but more importantly, how do I upgrade the built-in software so that I have the advanced "Internet Access Policy" controls?
View 4 Replies
View Related
Nov 11, 2011
I have my E1200 connected to my Netgear FVS318 router (which is a wired router) and the Netgear is connected to the internet.When a wireless client attempts to connect to the internet after automatically receiving an IP from the E1200, they do not have internet access as the default gateway that gets assigned is the IP of the E1200 192.168.2.100, which is not correct. It should be assigned 192.168.2.1, which is the IP of the Netgear router. Thefore, I have to manually set their IP addresses to use 192.168.2.1. How do you configure the E1200 to assign the correct Default Gateway IP to wireless clients who want to use DHCP?
View 4 Replies
View Related
Oct 2, 2011
Why does my E1200 forget my Parental Control Password? This happens almost weekly and I have to use the "forgot password" option. It asks my security question, I answer it and set the new password to the same password it keeps forgetting. Why does this happen? Also, is there anyway to have total 24hr control on the Block Internet Access?
View 4 Replies
View Related
Jul 18, 2011
We are trying to get laptop to connect to our wireless. She has entered the network key and the icon says she is connected with a excellent connection, however, we cannot connect to the internet. The other challenge is that everything is in Spanish.
View 9 Replies
View Related
Mar 26, 2012
I don't want to allow any Guest access to my network, but I do want to connect my iPad to my network. I've successfully added another computer to the network but the router setup seems to want the iPad to connect only as a Guest .Is there a way to treat my iPad as another computer (not as Guest) so that it my network recognizes it in the same way it recognizes the second computer (without entering a password)?
View 1 Replies
View Related
Aug 14, 2012
The wireless router, which is a linksys E1200 is completely new. I setup the entire wireless and there was no problems on that front.The problem is the wireless connection. Even when I am within a few inches of the router, I couldn't even load a youtube video properly. It buffers every 2 seconds. But when I plug the cable into my computer, it works completely fine. The signal strength is excellent all the time.
I tried using inSSIDer to look for the number of connections within my area for the one with the least inteference and found that I'm already on the good one, or actually, all of them looked more or less the same. But I tried changing anyways from 1 to 6 to 11, and none of them made a difference.I then tried changing my Wireless Security to WPA2 Personal. Then I tried changing the Wireless Network Mode to Wireless-G Only instead of Mixed and the wireless speed increased.
View 5 Replies
View Related
Dec 28, 2011
Well i recently purchased a Linksys e2500 router,so i connect it to my modem and then to my PC, all by Ethernet cable(no wireless) as i want my pc connected by cable, i go through the set up CD and it finishes and says you are now connected to your router but..... not to the internet and it tells me to restart the modem with i have done, i have also tried power cycling modem, router and PC, but i still get the same old problem and when i go in network connections my local area connection says i am connected but it wont let me use the internet. also above when i have been trying to set up the router this "Internet Gateway" pops up in my network connections and it is disabled and whenever i try to enabled it it just says failed.
I'm on Cable broadband my modem is a Motorola SB5101 SURFboard cable modem and the router is an Linksys Cisco e2500 and i am using windows xp sp 3
View 4 Replies
View Related
Apr 26, 2012
Since I've bought a new Cisco router last summer,, a Linksys E1200 (v.1 updated...) (always in the wireless mode), my laptop (Sony, Vaio VGN-NW110D) freezes when I stream videos online or when I use skype video calls. It sometimes freezes for a few minutes (in that case it's just really extremely slow and it sounds like a satanic robot), and then comes back (but does it again a few minutes later. Or sometimes, and this is more frequent with skype video calls, it completely freezes, and I have to reboot the hard way...This never happened to me before and I've been watching videos and video skyping for years. I have windows 7, service pack 1 (32 bits) now . I have windows 7 now, since about the same time I bought the router. But what makes me think its related to the router is that when I'm at work, or at my parents, or sisters, or boyfriend's house, this problem does NOT occure.... I don't know if this information could be relevant, but this does not happen when I make videos calls with skype on my iphone.
View 1 Replies
View Related
Jan 18, 2013
I have a E1200 router and it's pretty good however I've noticed that there are 12 devices connected to my router when infact there should only be 4 devices connected. I would like to see all the devices that are connected and disconnect the ones that don't belong
View 1 Replies
View Related
Feb 3, 2013
Linksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
View 3 Replies
View Related
Jun 21, 2011
Linksys Wireless router connected but no access to the internet?
View 19 Replies
View Related
Oct 22, 2011
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
View 1 Replies
View Related
Apr 10, 2012
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies
View Related
Aug 5, 2011
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies
View Related
Nov 5, 2011
I've looked through the forums and FAQs and haven't seen anything that resolves my issue. I recently moved from the US to Japan. I had my WRT54GS set up in the States and the network worked fine. When i got here, i set it up, hard reset the router and set up a new network.
I can access the internet when connected through the router via ethernet cable, but I cannot connect any of my wireless devices. Easy Link Advisor says "internet connection is not working" but it is. I have two computers connected via cable and they both work so it is not an issue of my ISP allowing multiple IP addresses.
My wireless devices (XBox, PS3, laptop) can see the network but cannot connect through to the internet. I also just noticed that the "wireless mode" according to the EasyLink Advisor says "disable", however the wireless settings on my 192. server webpage is set to "mixed" and seems to be correct in all settings to be on.
View 9 Replies
View Related
Jul 26, 2012
I have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsJim>ipconfig /all
[Code].....
View 19 Replies
View Related
Jul 8, 2011
My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.
View 1 Replies
View Related
Dec 25, 2012
I just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.
View 3 Replies
View Related
Feb 25, 2013
What happen to my router linksys e1200, after i update the firmware to the latest version "Access Restrictions" is change to "Access Policy". how can i revert it back to "Access Restrictions" do i need to downgrade the firmware?
View 2 Replies
View Related
Aug 23, 2012
I see some other threads about this same thing but I wanted to start my own to keep track if what I did. I know zilch about computers.I have an ACER I got less than a month ago. I have Verizon mifi. Windows 7My comptuer says I am connected but it says no internet access. The wifi works fine on my old netbook though. I keep getting error 105 Unable to resolve the server's DNS address. What do I do?
View 1 Replies
View Related
Nov 5, 2012
I am connected to the LAN via ethernet cable, but internet access is terribly slow - cant even browse internet properly (work network uses a proxy to connect to internet - not sure if that is relevant). I would like to remain connected to the LAN via ethernet (to provide easy connection to intranet and mail exchange server, but for outside internet connections, I would like to use a mobile 3g connection.
View 1 Replies
View Related
Feb 19, 2012
I recently purchased a Linksys E1200 router. I have two desktops (Windows XP) hardwired into the router, one of which is not connecting at all.I have talked to Linksys tech support 3 times already and they have not been able to fix the problem. Pinging a website got a request timeout.Pinging the router got a good response.It was properly assigned an IP address, but did not connect through the router.Under Network Connections, it displays as "Connected" but is still not able to access the Internet.
View 2 Replies
View Related
Jul 18, 2011
My network connection was vanish the client are not connected to server and the computer cannot access internet
View 1 Replies
View Related
May 18, 2011
I recently switched cable companies and was given a Linksys E1200 wireless router to connect to the internet. The router works fine with all of my laptops but not with my desktop. The desktop has a WMP11 wireless PCI card. I have had trouble using this card in the past but have always managed to solve connectivity issues. This time, I am unable to connect to the internet. Although I can detect the network signal, the network will not assign my computer an IP address. Also, when I first switched routers, I got a message saying I did not have the proper certificate to connect to the network
View 1 Replies
View Related
Mar 28, 2012
Is it possible to use an E1200 as an access point? I am connecting it to an SE2500..
View 1 Replies
View Related
Nov 29, 2012
I'm able to connect to the internet through my E1200 router but I cannot access the router set up page. 192.168.1.1 doesn't work... I can connect to it just fine with my laptop however... so I changed it to 192.168.254.1 as per some internet instructions. Still can't connect via my desktop... Tried ipconfig /flushdns to no avail. Cleared the internet cache Upgraded the firmware (via the laptop) rebooted the computer rebooted the router... reset the router... After rebooting the router I can type in the username and password to access the router, but it never connects....
View 6 Replies
View Related
May 15, 2012
I had a E1200, I read the articles from the support about the routers, I think the "access Restrictions" has more flexible to setup on for the parental control, after chated to cisco support person online, I was told that the E1200 v2 has this "access restrictions" function, and I wan convinced to purchase from them. I did. I got the E1200 v2 recently, however, after I installed the CD and found there is no "access restrictions" tab, instead the "access policy" is still there. by the way the firmware is 2.0.02 now. How to get the "access restrictions" from setup? I've chatted with cisco support person twice again, but nobody can fix the problem, one suggested to restart and reinstall the CD. I uninstalled the software, restarted the computer and reinstalled the CD. same problem, no tab of "access restrictions".
View 6 Replies
View Related
