Linksys Wireless Router :: WRT54GS Can Access Internet When LAN Connected
Nov 5, 2011
I've looked through the forums and FAQs and haven't seen anything that resolves my issue. I recently moved from the US to Japan. I had my WRT54GS set up in the States and the network worked fine. When i got here, i set it up, hard reset the router and set up a new network.
I can access the internet when connected through the router via ethernet cable, but I cannot connect any of my wireless devices. Easy Link Advisor says "internet connection is not working" but it is. I have two computers connected via cable and they both work so it is not an issue of my ISP allowing multiple IP addresses.
My wireless devices (XBox, PS3, laptop) can see the network but cannot connect through to the internet. I also just noticed that the "wireless mode" according to the EasyLink Advisor says "disable", however the wireless settings on my 192. server webpage is set to "mixed" and seems to be correct in all settings to be on.
View 9 Replies
ADVERTISEMENT
Oct 28, 2011
I've been having internet connection problems for the last few days and i usually do just unplugging the router and modem and turning it them back on but that hasnt been doing the job this time, its still connecting but it just says no internet access but it will connect when i connect my laptop to the modem. My router is linksys wrt54gs version 6.
View 6 Replies
View Related
Sep 28, 2011
I have used the router successfully since purchasing it in April, 2008. The router is connected via cable to the main computer and there are two other computers in the home that are/were used with it. However I noticed that whenever I looked into the available networks in the 'sub' computers it was described as 'unsecured'. I therefore went into the Router [via 192.168.1.1] and amended some settings... forget what they were set at however I changed it to WEP and now shows up as 'secured'.
I now find that I cannot access the internet from the 'sub' [other two wireless] computers and get message 'network did not assign a network address to the computer' if checking 'repair does not restore connectivity... contact network manager. Use the system with Windows XP Professional on Dell Optiplex GX270.
View 9 Replies
View Related
Feb 3, 2013
Linksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
View 3 Replies
View Related
Jun 21, 2011
Linksys Wireless router connected but no access to the internet?
View 19 Replies
View Related
Oct 22, 2011
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
View 1 Replies
View Related
Apr 10, 2012
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
View 3 Replies
View Related
Aug 5, 2011
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies
View Related
Jul 26, 2012
I have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsJim>ipconfig /all
[Code].....
View 19 Replies
View Related
Jul 8, 2011
My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.
View 1 Replies
View Related
Jun 22, 2012
I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?
View 5 Replies
View Related
Dec 25, 2012
I just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.
View 3 Replies
View Related
Jul 8, 2011
I changed the router's IP to 192.168.2.1 due to the same situation as this [URL] linksys and now I can't access my settings I have tried the both pips and nothing and I can't seem to get my linksys wrt54gs v7.2 to let two computers be on the internet at the same time both can be on the network but on one on the internet
View 6 Replies
View Related
Sep 13, 2012
I had an Linksys WRT54GS and this wireless is connected to a switch in an internal enviroment but i want connect guest users without them see my internal network and can't access to any internal server....how can i configure this?
View 1 Replies
View Related
Sep 9, 2012
I need to set up a password for my wireless network, but every time I try to access the setup page, the router stops responding. I've gotten as far as it asking for username and password, where I enter admin as the password....and then nothing. The connection times out. I really need to protect my network.
View 1 Replies
View Related
Apr 16, 2013
I have a 2wire modem connected to the Internet port of my WRT54GS which is connected to a D link DSS 16+ Fast Ethernet switch. Without the switch, I can connect wired and wirelessly to my WRT54GS. However, when I put connect my any port of my D link switch to ports 1 - 5 of WRT54GS, I loose internet all together either wired/wireless to the router or wired to the D-link switch.I wonder why the IP Address will change as I understand that the switch is just a pass through switch.
View 1 Replies
View Related
Feb 4, 2012
i have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
View 3 Replies
View Related
Sep 24, 2011
My router keeps going out, and the only thing that gets me back on is to unplug, replug, then I'm good but only for about 20 minutes.
View 2 Replies
View Related
Nov 18, 2011
So my desktop is wired to my WRT54GS v7 router, which is connected to a DSL modem. The desktop has full connection and gets Internet. However, whenever I try to connect devices to the wireless network, they can connect to the network, but they don't get any Internet. I've also updated the firmware, too.
View 9 Replies
View Related
Mar 1, 2012
I have a wrt54gs v7 and a wap54g v3.1. Both have latest firmware on them. I set the access point to act as a repeater and entered the mac address from the router (It said to use the lan mac address. is that right?). I have them set on same subnet with static ip addresses. They have same wireless ssid and password with one using channel 10 and the other using channel 2. I can receive an ip address from the router and connect to internet. I cannot get an ip address from the access point. I tried a static ip on the computer and it will connect, but I don't have internet. Am I missing something in the setup? Can this access point act as a repeater for this router?
View 3 Replies
View Related
Jul 17, 2006
My lap top and other desktop are able to detect the internet but not my main computer with this router.
View 2 Replies
View Related
Aug 6, 2011
We got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies
View Related
Apr 30, 2013
I have a few devices I cannot connect to my router or modem but my ps3 and 2 xboxes are connected. I have easy link and I try to add devices to it but it doesn't show me the same options it did before when I added my ps3, and ipod. Now I can't connect my psp or any phone to it, I have the WRT54GS v7.2, those are my only problems with the router nothing.
View 3 Replies
View Related
Jul 2, 2012
I intend to connect a network built around the WRT54GS to Internet by passing through a second network who is already connected to Internet through the Orange Livebox-2 (French).I have a traditional home network with basic shares on the French Orange Livebox-2 and its WiFi.The computers runs XP - Pro .My ADSL access is normally through the Livebox-2 (Range of addresses 192.168.1.xxx) and I run DHCP Working Group "WORKGROUP".It works without problem (Internet and VoIP telephony) except the Wifi of the Livebox which is known as poor (range and stability).I also manages a small "pedagogical workshop" for the school who visit my mill.This network is available to my young visitors based on a (tower) server containing the libraries and teaching materials and its printer. It’s XP - Pro machine. and to allow a maximum of two laptops be WiFi connected.The second network is built around the Linksys router (wich integrates no modem, simply a router).The WRT54GS router (rev 6) whose firmware is original Linksys up to date.I am setting the two Wi-Fi (Livebox 6 Cnl) and Cnl 4 on WRT54GS and different keys (this is manageable without difficulty).It has its server DHCP and Wi-Fi to connect their machine.What about the name of this second network group ? Currently “WORKGROUP” as well.I am setting a range different on the router WRT54GS (192.168.2.xxx) and enabled the DHCP.This "educational" network works perfectly when alone and separated from the "home" network and doesn’t get connected to Internet…I want to connect this router Linksys WRT54GS rev6 cascading through the Livebox-2. Share Internet via the Livebox-2 access.What about functionality?What is the connection to setup ?Should it be simple physical connection with a cable between the yellow ethernet port "2" of the Liveboxbox and the "Internet" connector of the Linksys router? Is this a good track to explore? I have searched extensively on the Internet but found proposals who are very old and refer to old Livebox... I did test and is not satisfactory...
View 1 Replies
View Related
Oct 20, 2012
I have a WRT54GS V7 that I have been running for a few years now with no problems until today.My wife used the internet from her laptop through the day but this evening after she moved to the bedroom and booted up the laptop, she found there was no internet connection. I tried what I know in cases like these, unplugging the router or modem for brief periods of time to try and get things going again but to no avail. So I tried using the Easylink Advisor which basically suggested the same process.
At this point, my internet connection is coming in from the cable just fine. I have access on the desktop which is wired and works with no problems. The modem and router lights are both signaling that everything is fine but no wireless internet coming from the router.
Using the desktop I tried looking for some solutions and tried resetting the router. I ultimately called customer support but being out of warranty they wanted too much although she suggested that I needed to reconfigure the router since I had reset it. I followed the online instructions for reconfiguring but still have gotten nowhere.
View 1 Replies
View Related
Jul 27, 2011
I've recently been gifted with a WRT54GS v.2 which came from a family member who upgraded their wireless router and therefore passed this one along to me. It was working perfectly for them, but not me.
I've tried using the setup CD and doing a manual setup, but no internet connection is detected. I must confess to being a total wireless router newbie, this is my first one, so I am stumped as what to do next. I've looked at the FAQ's and through the forum as well, but I just don't know what might apply to my situation and as I am not very well versed in the terminology, I tend to get lost.
View 8 Replies
View Related
Feb 21, 2012
I have a Linksys WRT54GS vers 7.2 Router on an iMac OS X Leopard. The other day I was in the middle of downloading an upgrade for the router when Firefox gave me this message: "Firefox can't find the server". I was no longer able to access the internet, and the router's green power light was left flashing. It flashed for over 24 hours. I tried unplugging the router and shutting down the computer, then plugging in the router and turning on the computer. (I don't have a modem.) The light was still flashing. I tried pressing the logo button for 5 seconds. Still flashing. Tried pressing the reset button in the back. Still flashing. 'I can't get on the internet or into the router. Linksys live chat gave me a link to "Upgrading the router’s firmware using the TFTP utility", which involves a download, but I can't download anything because I can't access the internet.
View 8 Replies
View Related
Jan 5, 2011
Hard wired network (15 workstations.) I had a dsl modem connected to my network switch and linksys wrt54gs router connected to that modem. All hard wired workstations had internet access AND there was a wireless internet connection. With any wifi device I could access the internet.I switched from dsl to comcast. All hard wired work stations still have internet. but when I plug my wireless router into the modem (comcast business IP gateway) there is no wireless internet connection. The hard wired workstations can still get online and there IS a wireless network, but it does not allow internet access (page cannot be found etc.)
Comcast says it absolutely should work. Linksys says it requires simple reconfig of router settings (reset router, clone mac address.) I have read knowledge base articles from linksys and followed each step. The lan ports of the modem are all working if I connect to them directly with a laptop and cable. I have reset router multiple times, cloned mac address, dhcp release/renew.
My physical connections are correct. In the router set up utility, I can see the mac adrdress and ip address but can't tell if the IP is from the modem or the router. Default gateway is always 192.168.1.1 in the router AND in any workstation ipconfig screen. Ip addresses are 192.168.1.xx in ipconfig at any workstation AND in the router set up status.
I cannot access internet via router even if plugged directly into it. It is as if the router is not getting the correct information from the modem. However, it worked perfectly with the DSL modem the day before we changed.My workstations are all hard wired and work. I simply want to have Wi-Fi also... for phones and laptops w wireless etc.
View 8 Replies
View Related
Aug 5, 2011
I'm connected to the internet with a bullet M2 and when I connect directly I have internet access. When I connect my linksys 160n router and plug in my computer I show a connection but can't access the internet. I can ping the bullet and my computer from the router and get a response. I've also borrower a wrt54g router from a friend and have the same problem, The bullet is in bridge mode. My computer is running xp pro.
View 6 Replies
View Related
Dec 27, 2011
So, I restarted my linksys router (WRT54G model) yesterday because of some issues I was having. Right now, I have full bars for connectivity on all my devices (Acer Aspire laptop running Windows 7 starter) when the Ethernet cord is connected from the modem to the router, but I have no internet access. Only when my laptop is connected directly to the modem, I have access to the internet (but ofcourse no wireless).
View 1 Replies
View Related
Apr 9, 2013
Model wrt54gsWindows xpI got the wireless network setup and password protected and my computer and phone can sign o the wireless network, but when I try to go to a website it doesn't work. If I connect te computer directly to the modem then it works.
View 2 Replies
View Related
Nov 5, 2011
My xp computers recently gave up. So, I bought a new one (windows 7).
When I had my new computer plugged directly into my modem, there was no problem; I could easily connect to the internet.Yet, when I plugged the modem into my router (WRT54GS) and then plugged the router into the computer, I repeatedly encountered: Error 651.
The new computer has a built-in wireless adapter. So, I was able to disconnect the router and try to re-connect via a wireless connection. Yet, dispite being able to connect to my "network", the computer was not able to connect to the internet; again, I received the dreaded Error 651 message.I tried using the installation disk, but it would not work, either.
View 3 Replies
View Related
Nov 24, 2011
I have a sonicwall firewall connected to the LAN port of the RV016 router and two DSL modems connected to the WAN ports.
Ip address allocation:
Firewall
192.168.50.9
RV016
LAN - 192.168.50.10
WAN - 192.168.60.1
WAN - 192.168.61.1
What configurations do I need to enter into the RV016 to allow other networks connected to the firewall(192.168.3.0, 192.168.2.0) to access the internet?
View 1 Replies
View Related
